Tiger T5 User Manual

Page 1
1
Table of Contents
Safety Precaution ............................................................................2
1. Reference
1.1 General Features ...................................................................................3
1.2 Accessories ............................................................................................4
2. Basic Function
2.2 Rear Panel .................................................................................................6
2.3 Remote Control Unit ...................................................................................7
3. Installation and Connection
3.1 Connecting to TV ......................................................................................9
3.2 Connecting to Dish LNB ...........................................................................10
4. Installation and Operation
4.1 Installation...................................................................................12
4.2 Channel Manager.........................................................................16
4.3 System Setting................................................................................19
4.4 Game............................................................................................20
4.5 Other Useful Information................................................................20
5. Additional Information
5.1 Problem Solving..........................................................................24
5.2 Menu Screen Structure................................................................25
5.3 Glossary.......................................................................................26
Page 2
2
Page 3
3
Page 4
4
Safety Precaution
This STB has been designed and manufactured to satisfy the international safety standards. Please read the following safety precautions carefully before operating this receiver.
Main Supply:
Before operating, please check the units operating voltage is 90~250V AC 50/60Hz.
Overload:
Do not overload a wall outlet, extension cord or adapter, neither use damaged power cord or touch it with wet hand as this may result in electric shock.
Liquid:
The receiver shall not be exposed to dripping or splashing water, and that no objects filled with liquids, such as base, shall be placed on the apparatus.
Ventilation:
Keep the slots on top of the receiver uncover to allow sufficient airflow to the unit. Do not put the receiver on soft furnishings or carpets.Do not expose the receiver to direct light or do not place it near a heater or in humid conditions. Do not stack other electronic equipments on top of the receiver.
Cleaning:
Plug out the receiver from the wall outlet before cleaning. Clean the receiver by a soft cloth or mild solution of washing-up liquid (no solvents).
Connection:
Disconnect the receiver from the mains when you connect it to satellite LNB or disconnect it from LNB. Failure would possibily cause damage to the LNB.
Location:
Put the receiver indoor in order to avoid lightening, raining or sunlight.
Uncover:
Do not remove the cover, to reduce the risk of electric shock.Contact qualified and licensed service personnel to repair the receiver, or contact your dealer.
Page 5
5
1. Reference
1.1 General Features
MPEG-2 & Fully DVB Compliant
PLL RF-Modulator UHF 21~69 with PAL B/G,I,D/K
Multi LNB Control by DiSEqC 1.0,1.2,1.3(USALS)
SCPC/MCPC Receivable from C / Ku-Band Satellites
Digital Tuner with Loop-Through
PAL/NTSC Conversion
Variable Aspect Ratio (4:3,16:9) for TV
4-digi 7-segment LED Display
RS232 Port for Updating software and Additional Information
User Friendly OSD Menu with Full Function
Installation by Easy Setup Guide
256 Colors Graphic User Interface
Easy Tuning and Network Search
Multi Language Menu (English / Italian / French / Spanish / Germany / Turkish / Arabic / Russian / Persian)
7-Days EPG (Electronic Program Guide) for On-Screen Channel Information
PIG,Small Screen Picture on EPG
PIP, Picture in Picture
Super fast 800 pages OSD Teletext Supported and VBI Teletext Inserted
8 Favorite Group and Parent Lock Function
100 Satellites, 4000 Channels and 4000 transponders
ZOOM and Multi TImer function
Audio Tone for Tuning signal
6 Kind of Sort function for Channels
Page 6
6
1.2 Accessories
Users manual
Remote Control Unit
A/V Cable
Batteries
Figure 1. Accessories
User Manual
User Manual
A/V Cable
Battery Remote control
Page 7
7
2. Basic Function
2.1 Front Panel
Figure 2. Front Panel
1. Power Button
The POWER button is used to turn the power on or to make it on Standby Mode.
2. MENU Button
Activate the main menu in viewing mode, or exit all menu.
3. OK Button
Activate the highlighted sub menu in menu mode and activate the channel list in viewing mode.
4. CH+ / CH- Button
Change channel in viewing mode and move the cursor up/down in menu mode.
5. VOL+/ VOL- Button
Increase / decrease the volume in viewing mode and change settings in menu mode
6. Display (4-digi 7-segment)
4-digi displays channel information. In Standby mode the 7-segment displays local time.
7. Power LED
Power indicator
8. Lock LED
Signal Indicator
4
32
1
7
8
6
5
Page 8
8
2.2 Rear Panel
Figure 3. Rear Panel
2
1
5
8
6
1. LNB IN 13/18V 500mA Max
Connect the Satellite Dish LNB.
2. LOOP OUT
Output the Dish LNB IN signal.
3. ANT
Connect to TV Antenna
4. TV/VCR
Output to TV Set or VCR.
5. AUDIO, VIDEO
Connect to Audio/Video of TV. Connect Yellow to Video port, connect Red and White to Audio Right and Audio Left.
6. 0/12V
Supply 12V DC to other apparatus.
7. RS232
Connect to serial port of PC for software upgrade.
8. Electric Inlet Lead
Mains 90~240V AC (Auto selectable), 50~60Hz, Make sure to check the power spec.
9. Power
AC Power Switch.
3
47
9
Page 9
9
2.3 Remote Control Unit(RCU)
You can control this receiver by this remote controller with full function.
Figure 4. Remote Control Unit
1. POWER:
Switch the receiver on or set it to standby mode.
2. MUTE:
Turn the sound On/Off.
3. SAT:
Show the scanned satellite list.
4. NUMERIC KEY (0~9):
Change program or input number.
5. RECALL:
Move to the previous viewed channel.
6. TV/RADIO:
Switch between TV and RADIO.
7. EPG (Electronic Program Guide):
Show the TV/Radio program guide.
8. FAV:
To get favorite channel list you set before.
9. MENU:
Activate main menu or exit to live channel.
10.EXIT:
Exit current menu step by step.
11.CHS/T:
Change program.
12.VOLW/X:
Change volume in viewing mode.
13.OK:
Confirm the highlighted menu item.
Open the program list.
14. ...VOL...
Change volume
15.Page
Page up/down on menu.
Page 10
10
16. AUDIO:
Select or change the Audio.
17.PAUSE:
Freeze the picture.
18.ZOOM:
Picture Zooming function.
19.INFO (i):
Show the information of the current channel.
press EXIT button to exit this menu.
20: F1: SLEEP
No function.
21: F2: SUB:
Showing Subtitle information if the channels contains.
22: F3: Multi picture
Activate Multi picture menu and select picture
23.TEXT: Show the teletext content if teletext is transmitted.
Page 11
11
The following diagram shows you the connections among receiver, TV, LNB and other equipment, please read this first if you are not sure about the connection, and it will guide you to the correct connection.
3.1 Connecting to TV
3. Installation and Connection
Figure 5. Connecting to TV & VCR
AUDIO VIDEO RF IN
RF IN RF OUT
T V
VCR
Page 12
12
3.2 Connecting to Dish LNB
You can connect one fixed dish LNB directly to the LNB IN, or connect at
least two dish LNB by DiSEqC Switch, you can also connect to HH mount
dish LNB.
Figure 6. Connecting to Dish LNB
OR
COMPUTER
DISH
LNB
LNB
HH MOUNT DISH
Page 13
13
Figure 7. Connecting to Dish LNB
DiSEqC
LNB 1
LNB 2
LNB 3
LNB 4
Page 14
14
4. Installation and Operation
After connecting the receiver to other required equipment, turn on the
receiver, it will be main menu at the first startup, you need to follow the proce-
dure to setup your receiver to search the channel.
2).Use UP/DOWN button to select your subject and press OK to
confirm your selection and enter that sub menu, press EXIT button you
can return to the previous menu.
--Menu Guide--
--Main Menu--
Press MENU button to activate main menu,
main menu consists of Installation, Channel
Manager,System Setting,Games.
4.1. Installation
Select Installation, press OK , the
Installation window will be displayed.
Press OK to Enter Antenna Setting, here you
can make satellite search, multi satellites
search, satellite edit, TP search, TP edit and
other functions.This window shows the pre-
stored satellite list,you can select satellite
by UP/DOWN button,press OK to mark the
satellite.
Page 15
15
C : Satellite Edit
C-1 : Add satellite
Press green button to add satellite,here you
can input new positon and other details,OK
to confirm the setting,and this new satellite
will be added to the end of the satellite list.
C-2 : Delete satellite
Press red button to delete satellite.You will
get a warning message to ask you confirm
the delete. After you confirm, all TP and
channel in this satellite will be deleted.
C-3 : Rename satellite
Press yellow button to rename satellite.
A: Antenna setup
Press right button on RCU and move to the
antenna setting,here to setup the correct
LNB frequency,switch Type(None,port 1...
port 4,burst A,burstB,Auto).
B : LNB frequency and power
Here you need to check the LNB
frequency according to your antenna,set
the correct frequency or define yourself,
and keep LNB power be 13V/18V.
Page 16
16
E: Transponder list
Here select transponder list by UP/DOWN
button,press OK button.Here you can Add,
Edit, Delete transponder under the
satellite you selected.
E-1: Add TP
Press green button you will get this window, and here you can input the frequency, polarization, symbol rate and FEC to add a new transponder, press OK to confirm the setting.
E-2: Delete TP
Press add key to delete the select TP with your confirm.
E-3: Search channel
After selecting transponders,you can press blue button to start saerch channels.Dring searching the TV channel and Radio channel will be listed separately.
E-4: Edit PID
Press YELLOW key to enter PID menu, here you can Add, Delete Rename a channel.
E-4.1 Add PID
Press green button, you can add one channel by inputting the PID.
D :Multi Satellites Search
After selecting satellites,you can press
blue button to start search channels.
Dring searching the TV channel and Radio
channel will be listed separately.
Page 17
17
E-4.2: Rename
You can press yellowbutton to rename the
selected channel.
E-4.3: delete
Press the red button to delete the
selected channel .
F: Motorised System
If you connect receiver to DiSEqC1.2 or
DiSEqC1.3 antenna,set Motorised system to
DiSEqC1.2 or USALS, Here press OK
button to enter motor system.
Satellite
Select the correct satellite what you want
to search.
Select the correct TP in this satellite to
detect the signal when motor is moving.
Position Auto To Drive the dish until find
the strong signal.
Continuously Move
Push < / > button, the dish will be motorised to West / East to search the best signal, release the button will stop the moving.
Step Size
Set the moving step.
Move Steps
Move East or West step by step.
Limit Set
Disable or enable West limit or East limit by pressing OK.
Save Position
Press OK button to save the current position you searched.
Page 18
18
4.2. Channel Manager
Press Channel Manager in the main
menu, you will get this window, here you
can edit TV channels and Radio channels,
sort channels and upgrade channels via
SDX.
A: Edit Channels
Select Edit channel, you will go to the
channel edit menu. Here you can Delete,
Move, Rename or Lock the channels.
B: Edit Favorite
Enter Edit Favorites Menu, you can set 8
ground favorites. You can scroll the favorites
group by LEFT and RIGHT key, and you can
set the favorite by select the RED/GREEN/
YELLOW/BLUE key.
Command Type
Save Position: Save the current position. Go to Position: Press OK button to move the dish to the stored position.
Go to Reference: Press OK button to move the dish to reference 0 position. Go to X.X (9.9): If you use USALS and select the Motor Mode to USALS, here one more option you can move the dish to exact position of the
satellite.
Note: Before you use USALS, you should go to Main Menu
System
Setting
USALS Setup to set you local position firstly.
Page 19
19
C: Parental Control
Here to setup your easy to remember, if you
forget this password, please contact with
your dealer for assistance. Also you can
select some menu entrance to be locked by
password.
D: Timer Adjust
Here you can set Timer, Event Timer and
Sleep Timer.
D-1. Timer Setup
Here to set the timer mode, time zone and
summer time if needed according to your
region.
c. Event Timer
Here you can set your favorite channel to
begin broadcasting at future time you set,
including both TV and Radio, you can add,
edit and delete the event you set. Note: You
can add 8 groups event timer.
Timer Mode: <Auto> Auto detect timer from EPG time
<Manual> Set the time by manual.
Time zone: Select you the Time zone from the time difference.
Summer Time: If you region need summer time to correct the current time,
please make it ON.Source: <TV> Select channel from TV list
<RADIO> Select channel from Radio list
Channel: Select the channel from channel list
Date: Start Date you want to active the timer
Page 20
20
c. Sleep Timer
Here you can set Sleep timer to
automatically switch off the receiver.
E: Factory Default
You can choose reset type, <ALL,
Channel list, only Radio list, only Scramble
channel>. If you choose ALL, all the
previous setting will be erased, such as
parental code, favorite channel etc…
Start/Stop: Set Start and Stop time
Repeat: <1X> only one time <Day> Repeat every day. <1 Week> Repeat the
channel 1 week. <1-5> Repeat the channel from Monday to Friday. <6-7>
Repeat the channel from Saturday to Sunday.
Page 21
21
4.3. System Setting
Select System Setting, you can get this
windows.
A:System
You can setup the menu language, audio
language,RF, according to the standard of
your country.
B: OSD
Here you can set some OSD options. Such
as Menu Color, Transparency, Timer out,
and TV system, 4:3 and 16:9.
C: Update Via SatcoDX
If you have subscription to TELE-Satellite,
then you can use this function to upgrade
the channel data by RS232 through the
computer.
Page 22
22
D: USALS Setup
If you use USALS, you have to setup you
Local parameters.
E: About STB
Here is some information about this STB,
including software version, hardware version
Loader version, you need to submit these
information to your dealer if you need service
from them.
4.4. Games
Games are available in this S/W
4.5. Other Useful Information
This will guide you on how to use
general info while watching TV program or
listening Radio program.
SET
Press SAT button on the remote control, you
will get this menu which contains the satel-
lites you searched and stored, select one
satellite and press OK, all channels will be
listed under that satellite you selected.
Page 23
23
Channel List-OK
In viewing mode press OK button and you will
get this window. Press Red, Green, Yellow and
Blue button to select different category.
RECALL:
Press recall button you will get the viewing
history of last 16.
TV/RADIO:
In this window you can select channel and
delete/undelete channel, rename channel,
sort channel, move channel, lock channel,
skip channel, set favor channel.
Select Channel Manager, you will get this
window.
EPG:
Press EPG button on remote control, you
can get the electronic program guide of
seven days if available.
Page 24
24
FAV:
In viewing mode, you can get the favorite
channel group by pressing FAV, press red
button to change category
AUDIO:
In viewing mode press AUDIO button and you
will get a menu, you can set the Audio mode
here and change the audio mode, Stereo,
Left, Right.
PAUSE:
Freeze the picture.
ZOOM:
Picture Zooming function.
Page 25
25
i:
In the viewing mode when you press
INFO button, the info bar will pop up, it
contains satellite and channel
information, detailed EPG info will display
in the menu if press INFO again.
F2:SUB
Showing Subtitle information if the
channels contains.
F3: Multi picture
In viewing mode ,press F3 you will get the
multi picture selection ,select one and press
ok ,multi picture will be displayed. Move up/
down, left/right to select channel,press F3
again to get that selected channelpop out
and it is living ,press ok to display it in full
screen or exit to select other channel.
TXT:
Show the teletext content if teletextis
transmitted.
Page 26
26
5. Additional Information
5.1 Problem Solving
You might meet abnormal working of this STB with various reasons, check
the following which may help you.
Problem
LED on the front panel fail to light up/is not lit.
No picture or sound.
Bad picture/blocking error.
No startup menu on screen after turning on STB for the first time.
The remote control is not working.
You have forgotten your password.
Poor picture quality orLess channels in scanning.
Possible causes
Mains supply cable is not connected.
Satellite dish is not aiming to satellite accurately.
No signal or weak signal.
The LNB is faulty. The cable is faulty.
Satellite dish is not aiming to the satellite accurately Signal too strong. Satellite dish is too small. LNB noise factor too high. The LNB is faulty.
The system is connected by SCARTcables and the TV is not in AV/EXTmode.
Battery exhausted. Remote control is not aimed correctly
STB is in standby mode.
Low LNB power or singal loss in cable.
What to do
Check if the mains supply cable is plugged into the power socket.
Adjust the dish. Check the signal strength indicator in one of the channel search submenus. Check the cable connections,LNB and other equipment connected to LNB & receiver, or adjust dish. Replace the LNB. Replace the cable.
Adjust the dish.
Connect a attenuator to LNB input. Change to a larger dish. Change LNB with lower noise factor. Replace the LNB.
Switch the TV to the appropriate AV input.
Change the batteries (both). Aim the remote control at the STB. Check that nothing blocks the front panel. Check if LED indicator on the front panel is showing the time, press the power button to switch off standby mode.
Contact the dealer or Service Provider. They will help you set it up again.
Change the LNB power to 14V/19V in Antenna setup menu.
Page 27
27
Menu Navigator
searching
TV channels
Video channels
Antenna Setting
Transponder
Motorised System
...
Edit Channels
Delete/Undelete
Move
Rename
Lock/unlock
Installation
Antenna Setting
System Setting
System
OSD
Update via satcoDX
USALS Setup
About STB
Games
Teriks
Calendar
USALS Setup
Longitude Angle
Longitude Direction
Latitude Angle
Latitude Direction
Rotating speed
Upgrade via
SatcoDX
Band
Source
Channel Type
Only Transponder?
Del Ecist Data?
About STB
Model ID
H/W Ver
S/W Ver
Loader Ver
Edit Satellite
Add
Delete
Rename
Move, Hide.
Edit Favorite
Movies
Sports
News
Music
...
Parental control
Password lock
Installation lock.
System lock
Change PIN
Timer Adjust
Timer Setup
Even Timer
Sleep Timer
Code
Code
5.2 Menu Screen Structure
Main Menu
Installation
Channel Manager
System Setting
Games
Channel Manager
Edit Channel
Edit Favorite
Parental Control
Timer Adjust
Factory Default
System
Menu Language
Audio 1
Audio 2
RF Channel
RF System
Change Channel
Option
OSD
OSD Transponder
TXT Transponder
Need Help
Time Out
TV System
TV Screen Format
Code
Ant posisitoner
Move Motor
Multisatellite set
Satellite
Frequency
Factory Default
All
Channel List Only
Radio Channel Only
Scramblr Channel
Only
Page 28
28
5.3 Glossary
Antenna
A device that collects and radiates electromagnetic waves. Includes a satellite dish and abroadband antenna.
DiSEqC
DiSEqC(Digital Satellite Equipment Control)system, it is a communication bus between satellite receivers and peripheral equipment using only the existing coaxial cable.
DVB
The Digital Video Broadcast group was created to establish a technical framework for the introduction of digital video broadcasting systems.
LNB (low-noise block converter) or LNBF
An electronic unit mounted on the satellite dish. It receives the signals reflected by the dish and converts them to signals that can be used by the digital satellite receiver.
GHz
The prefix giga means milliard, and Hertz means cycles per second. Signals in the GHz range are often called microwaves.
MHz
The prefix mega means million, and Hertz means cycles per second.
MPEG
Moving Picture Experts Group. Established by the International Standards Organisation to provide the basis for a picture coding and compression system.
Forward Error Correction(FEC)
A system of error control for data transmission.
PID(Packet Identifier)
A set of numbers that idenitifies transport stream packets containing data from a single data stream.
Page 29
29
Polarisation
Polarisation allows several programmes to be fit into the same frequency band. The signals from a satellite are transmitted either with linear (vertical or horizontal) polarisation or circular (right or left) polarisation.
QPSK(Quaternary Phase Shift Keying)
Phase-shift keying in which four different phase angles are used.
Transponder
An automatic device that receives, amplifies and retransmits a signal on a different frequency.
Symbol rate
Speed of the digital transmission
RF
Radio frequency (known as HF in some countries).
RGB
Red, Green, Blue. Colour signals are routed in separatecables in order to provide a high quality TV picture.
Scrambled TV programme
Some TV programmes are transmitted in scrambled form.
SERIAL RS 232
A serial communication standard data port.
S/PDIF
Sony/Philips Digital Interface Format. Digital audio output.
RCA
Coaxial connector used to connect the receiver to an external amplifier.
Page 30
30
Loading...