Tiger G450 User Manual

GENERAL INFORMATION

INSTALLATION

MENU INFORMATION

3

10

11

Main Features
For your Safety
Unpacking
General Operation
RCU
Front Panel
Rear Panel

3
4
7
7
8
9
9

Connecting to Digital Amplifier

Connecting to TV using RCA support

10
10

Main Menu

1. Edit Channel

1.1 TV Channel List

1.2 Radio Channel List

1.3 Delete All

1.4 Favorite

1.5

2. Installation

2.1 Installation

2.2 CA

2.3 Factory Setting

3. System Setup

3.1 Language

3.2 Information

3.3 TV System

3.4

3.5 Local Time setting

3.6 Timer Setting

3.7 Parental Lock

3.8 OSD Setting

3.9 Other

System Backup

1.6 System Recovery

Display Setting

11
12
12
14
14
14
14
15
15
15
19
20
20
20
20
21
21
21
22
22
22
22

4. Tools

5. Game

6. USB

6.1 Media Player

6.2 PVR Storage Information

6.3 PVR Setting

6.4

6.5 Remove USB device safely

7. Hot key

7.1 Info

7.2 EPG

7.3 Find

7.4 Number

7.5 TV/Radio

7.6 Up/Down

7.7 Left/Right

7.8 Mute

7.9 Pause

7.10 OK

7.11 Audio

7.12 Recall

7.13 Fav

7.14 Teletext

7.15 Zoom

4.1 Network Local Setting

4.2 WiFi Manager

4.3 Upgrade by Network

4.4 Weather Forecast

4.5 RSS Reader

Upgrade by USB

23
23
23
23
24
24
24
24
24
25
25
26
26
27
27
27
27
28
28
28
28
28
28
28
29
29
29
29
29

30

A Digital Satellite Receiver is a convenient product that allows you to view a variety
of programs provided through satellite. This user's guide covers the installation of
the DSR and the necessary steps to implement various features. This also explains
special features available only in this DSR in detail, which will allow you to make full
use of these feature.
Information confirmed in this document is subject to change. We reserves the right,
without notice, to make change in product design or performances as progress in
engineering or technology.

Main Features

MPEG2 SD, MPEG2 HD, H.264/AVC SD, H.264/AVC HD,MP4,Divx
Embedded Conax(OPTION)
SCPC and MCPC receivable from C/Ku band satellite
Automatic PAL/NTSC conversion
4000 TV and Radio Channel Programmable
32 different favorite groups selection
Multi-language OSD
Fully support to 7 days Electronic Program Guide(EPG)
Picture in Graphics(PIG) support
True color On Screen Display
Automatic network search for newly added transponders
DiSEqC 1.2 fully support, 13/18V, 0/22K LNB control
Various channel editing functions(favorite, moving, locking, renaming, deleting
and sorting)
Parental control for channels
Ease to use Menu System
Software upgrades through RS232 port and Receiver to receiver, Support USB
upgrade
8 Timer Reservations, automatically switch to a specific channel Subtitle
support DVB EN300743 and EBU
Subtitle support DVB EN300743 and EBU
Teletext support DVB ETS300472 by VBI and OSD
Automatic save for last channel
Channel list can be sorted by alphabetic A Z,Scramble,Favorite,Lock,Sat
Support FAT16/FAT32/FAT12
Only list JPEG/BMP files
480i/p, 576i/p, 720p, 1080i, 1080p
Games
Recording, Timeshift, Mediaplayer

For Your Safety

Do not touch the receiver during thunder,
since that might create electric-shock
hazards.

Do not block ventilation holes of the
Receiver so that air can circulate freely.

Do not expose the receiver un-der the
sunlight. And keep it away from the heat
source.

Keep the receiver away from flower vases,
tubs, sinks, etc., in order to avoid damaging
the equipment.

To avoid electric-shock hazards, do not
open the cabinet, refer servicing to qualified
personnel only.

When the abnormal phenomenon occur,
you should cut off the power immediately.

Be sure to turn the Receiver off and
disconnect the AC power cord before
cleaning the Receiver surface. If the
surface is dirty, wipe clean with a cloth
which has been dipped in a weak soap-and­water solution and wrung out thoroughly,
and then wipe again with a dry cloth.

Switch the receiver off whenever it remains
out of service for an extended period.

General Operation

Throughout this manual you will notice that the everyday operation of the receiver is
based on a series of user friendly on screen display and menus. These menus will
help you get the most from your receiver, guiding you through installation, channel
organizing, viewing and many other functions.

All functions can be carried out using the buttons on the RCU, and some of the
functions can also be carried out using the buttons on the front panel.

The receiver is easy to use, always at your command and adaptable for future
advances.

Please be aware that new software may change the functionality of the receiver.

Should you experience any difficulties with the operation of your receiver, please
consult the relevant section of this manual, including the Problem Shooting, or
alternatively call your dealer or a customer service adviser.

Remote Control

Batteries

Guide

AV cable

RCU

The picture is only for reference, please make the object as the standard.

Key

Function

Standby on/off

When watching a channel, mute the sound

Switches between TV and Radio mode

0~9

MENU

EXIT

OK, LIST

PR+, PR-

Enter number of the required menu item or
select a channel number to watch

Press this key one time to run menu onscreen

Return to the previous menu on the menu
screen or escape from the menu

TV/R

Switches back to previous channel

Displays the favorite group list

Show information of the current channel

Switch to teletext or subtitle mode

FAV

INFO

Executes the selected item in the menu screen
or enters the desired value in any input mode

When watching a channel, change channels or
move to the next higher or lower item in the menu

When watching a channel, adjust the volume or
move to the left or right item in the menu

Call up the EPG (Electronic Program Guide)

EPG

FIND

Display the Find window

SLEEP

Enter into the sleep in mode

TXT/sub

Record and stop record the program

Press to fast forward or fast backward

Press to slow forward or slow backward

Play list

Enter into Play list

SAT

Display the satellite window

CH+,CH-

Change channels

Press once to pause the screen picture, press
once again to go to the normal mode

Display

PAUSE

rec/stop

Play and stop the program

recall

zoom

VOL+, VOL-

Adjust the volume

music

picture

USB

movie

software

Audio

Enter into the zoom in mode

Choose audio mode

Change video mode

In Media Player menu, press to switch to music list

In Media Player menu, press to switch to picture list

Enter into USB list

In Media Player menu, press to switch to Movie list
Enter into upgrade by USB menu

event

Enter into Timer Setting menu

The picture is only for reference,please make the object as the standard.

Rear PanelFront Panel

Rear PanelRear Panel

POWER ON/OFF

CONNECT TO AUDIO R/L TO
TV OR AUDIO TUNER

CONNECT TO A PC

FOR S/W UPGRADE

LNB IN: CONNECT TO SATELLITE ANTENNA
LNB OUT:CONNECT TO THE OTHER RECEIVER

CONNECT TO TV SET HDMI INPUT

CONNECT TO USB DEVICE

CONNECT TO TV SET OR VIDEO PROJECTOR YPbPr OR
COMPONENT INPUTS

CONNECT TO A

DIGITAL AMPLIFIER

CONNECT TO THE INTERNET

CONNECT VIDEO TO TV USING RCA JACK

The picture is only for reference,please make the object as the standard.

Connecting to TV using RCA support

Connecting to Digital Amplifier

DIGITAL AUDIO

CONVERTOR OR

AMPLIFIER

SPEAKER

DIGITAL AUDIO

RL

L R

IN

TV

AUDIO

Satellite

Dish

Satellite

Dish

Main Menu

This menu consists of 6 major main menus

as follow.

- Edit Channel

- Installation

- System Setup

- Tools

- Game

- USB

During the installation the OK key confirms a selection and LIST key shows Down

List Box if the column has mark. You can also use the numeric keys on the RCU

to enter numeric value.

Use the PR+, PR- key to move upwards and downwards from one line to another

line and use key to move from main menu to sub menu and move from left

side to right side or versa.

Meantime, you want to escape the menu system, please press MENU or EXIT key

on the RCU.

Make sure that you have properly installed and connected the cables of the receiver .

If the receiver is the factory status or there is no program list, when power on, the

Main Menu window will be displayed on the screen.

During the normal TV/Radio mode, press MENU key on the RCU to enter into the

Main Menu window.

If there is no program, you can not exit from the Main Menu window by pressing

MENU or EXIT key. System will inform "No channel" and the following items turn grey.

1. Press OK key or key to pop up the "Input

Password" dialogue, you can not enter into the

menu unless the correct password is inputted.

The default password is "0000".

2. Press PR+, PR- keys to move the cursor up or

down.

Sub-menu Turn grey when there is no program

Edit Channel

Installation

System Setup

Tools

TV Channel List
Radio Channel List
Delete all

Language TV System
Local Time Setting Timer Setting
Parental Lock OSD Setting
Other

1. Edit Channel

1.1 TV Channel List

Game

Othello Sudoku

USB

PVR Storage Information

Remove USB device safely

Upgrade by USB

Display Setting

Media Player

PVR Setting

Favorite

Network Local Setting

WiFi Manager

Upgrade by Network

Weather Forecast

RSS Reader

System Backup System Recovery

Installation
CA
Factory Setting

Information

1. Press keys to change page up and page
down.

2. Press PR+,PR- keys to select the program that
you want to play, and then press OK key to select.

3. Press red colour key to enter move list. In move list
select the program and press red key to mark this
program with the move mark. Press keys to move
the cursor to the position where you want to locate and
press OK key to confirm.
In move list press green key to group move, press
green key to select several channels and move these
channels at one time.
In move list, select channel and press yellow colour
key to pop up go to list, press number key to input
channel number you want, then the channel will move
to that position.

4. Select the program and press green key to mark
this program with the deletion mark. You can
cancel this mark by pressing OK key again.
Press EXIT key to pop up the dialogue "Are you
sure to save?". Select Yes button and press OK
key to save, or select NO button and press OK key
to exit without saving.

5. Select the program and press yellow key to pop
up a window ask you to input password, the default
password is "0000". After input the right password
program will be marked with the deletion mark. You
can cancel this mark by pressing OK key again.
Press EXIT key to pop up the dialogue "Are you
sure to save?". Select Yes button and press OK
key to save, or select NO button and press OK key
to exit without saving.

6. Press blue colour key to pop up the Rename
window.

colour key to switch
between capital letter and lower letter; press green
colour key to switch between English characters
and arabic characters; press keys to move the
cursor left or right; press numeric keys (0-9) to
input the character, please refer to the down table.
Press yellow colour key to save and exit, or press
blue key to cancel and exit.

In Rename window, press red key to delete
characters, press yellow

Numeric keys Press numeric key repeatedly, display in circle

1

2

3

4

5

6

7

8

9

0

.,*?!@1

ABC2

DEF3

GHI4

JKL5

MNO6

PQRS7

TUV8

WXYZ9

[space]_-0

If the name is empty, system will pop up a dialogue informing "Name" once yellow

colour key is pressed. Press OK key to close this dialogue.

1.2 Radio Channel List

Same operation as 1.1 TV Channel List, here we don't explain any more.

1.3 Delete All

Move cursor to the Delete All item, and press OK
Key to pop up the dialogue "Warning! Do you really
want to delete all channel?".

Press EXIT key to pop up the dialogue "Are you
sure to save?". Select Yes button and press OK
key to save, or select NO button and press OK key
to exit without saving.

There are 8 favorites group listed in this window.

Press PR+, PR- keys to select one and press OK

key to the Rename window. Since the same

operation as the above the Add Satellite window,

here we don't explain any more.

1.4 Favorite

1.5 System Backup

Move cursor to the System Backup item, and
press OK Key to pop up the dialogue "Backup the

current whole system". Select Yes button and
press OK key to save, or select NO button and
press OK key to exit without saving.

Satellite List

1. Satellite list is on the left side of the window. Press

PR+, PR- keys to select the satellite up or down. Press
OK key to select and mark, and you can press OK key

again to cancel the selection and the mark.

2.1Installation

Press keys to select between Motor

Antenna and Fixed Antenna.

2. Installation

1. Press OK key or key to pop up the "Input
Password" dialogue, you can not enter into the menu
unless the correct password is inputted. The default
password is "0000".

2. Press PR+, PR- keys to move the cursor up or
down.

1.6 System Recovery

Move cursor to the System Recovery item, and press
OK Key to pop up the dialogue "Recovery will

overwrite the current system".

Select Yes button and press OK key to save, or select
NO button and press OK key to exit without saving.

2. Press red colour key to pop up the Single

Satellite Search window.

3. Press green colour key to pop up the Multi

Satellite Search window.

4. Press yellow colour key to pop up the Edit

window.

Name: User numeric keys to change the name of

the satellite, please refer to the Edit Channel Name.

Longitude: You can press keys to switch between east longitude and west
longitude. After pressing OK key, you can use numeric keys to edit the longitude, press
EXIT key or the PR+, PR- keys to exit editing mode. The range of the longitude is from 1to
180 degree. If beyond this range, system will inform you "out of range" when you press
yellow colour key on the RCU.
After setting, press yellow colour key to save and exit, while press blue colour key to exit
without saving.

5. Press blue colour key to pop up the Add/Delete

window. The same operation as the above Edit

Satellite window

6. Press blue colour key and select delete, it will

pop up the dialogue "Are you sure to delete?".

Select Yes button and press OK key to delete the

selected satellite. You can cancel this operation by

pressing OK key at the NO button.

Suppose that you have selected Fixed Antenna in the

Antenna Connection window.

1. Satellite: All selected satellites in the satellite list are

displayed in this item.
Press keys to select the satellite in circle. Or
press OK key to pop up the drop-down list, then select
the desired satellite in the list and press OK key to
confirm.

Antenna Setup

Part A: Fixed

3. 22K, Polarity: You can press keys to select in circle.

Part B: Motor

Suppose that you have selected Motor Antenna in

the Antenna Connection window.

1. LNB Type: Select the proper LNB type.

2. Motor Type: Select between DiSEqC1.2 and

USALS. If you select DiSEqC1.2, the following

Local Longitude and Local Latitude items will turn

grey.

3. Delete All: Press OK key to pop up the dialogue

"Are you sure to clear set satellite position of this

tuner?". Press OK key at the Yes button to clear all

the memories about the position of the satellites

that are connected to the current tuner.

2. LNB Freq, Transponder, DiSEqC1.0, DiSEqC1.1: The same operation as the above.

4. Motor Setting: Press OK key to the Motor

Setting window.

Satellite: Press keys to select the satellite

in circle. Or press OK key to pop up the drop-down

list, then select the desired satellite in the list and

press OK key to confirm.

Transponder: The same operation as the above.
Position No., & Save: The range is from 0 to 63. "0" delegates the original position. You

can select the proper value when you has rotated the antenna.
Go to X: Press OK key to pop up the drop-down list, select the proper position (reference
or from 1to 63) to realize the selected position.

West <Save> East: Press key to turn east, while press key to turn west. Press
OK key to pop up the dialogue "Are you sure to change this satellite's position?". Press OK

key at the Yes button to save the current position, or press OK key at the No button to
cancel the operation.
Recalculation: Press OK key to pop up the dialogue "Are you sure to change this
satellite's position?". Press OK key at the Yes button to recalculation.

5. Limit Setup: Press OK key to pop up the Limit
Setup window.
Limit Setup: Press keys to switch among

Disable Limit, East Limit and West Limit.
Limit Setup: Move cursor to the Limit Setup button.
You can press key to turn west , or press key
to turn east.
Go to Reference: Press OK key to go to reference. If you select Disable Limit in the
above Limit Setup item, this button will turn grey.

6. If select USALS, Delete All item will turn grey.
Local Longitude, Local Latitude: Press keys to

switch between West and East, or press keys to
switch between North and South. Press OK key to
enter into the editing mode. Use numeric keys (0-9) to
input the longitude or latitude, press MENU key or
EXIT key to exit. The range of the longitude is from 0 to
180,while the range of the latitude is from 0 to 90. If the
inputted value is not in this range, system will pop up a
dialogue "Out of Range" when you exit from this
window. You can press OK key to close this dialogue.

7. Motor Setting: Press OK key to enter into the

Motor setting window.

Satellite, Transponder: Press keys to

select satellite or transponder, or press OK key to

pop up the drop-down list and select in the list.

In Antenna Setup List

4. Press green colour key to pop up the Add TP

window. Since the same operation as the above

Edit TP window, here we don't explain any more.

3. Press blue key to enter TP list.

In TP list press red colour key to pop up the Edit

TP window.

Frequency, Symbol rate: Press keys to

add or reduce by step one. Or press numeric

keys (0-9) to input the desired value. The range

of the frequency is 3000-13500, while the range

of the symbol rate is 1000~45000. The inputted

value is beyond this range, the value will return

to the origin value.

Polarity: Press keys to switch between

Vertical and Horizontal.

5. Press yellow colour key to pop up dialogue "

Are you sure to delete?". Press OK key at the

Yes button to delete the selected TP, or press

EXIT key to cancel the operation.

1. Press red colour key to pop up the Single Satellite Search window.

2. Press green colour key to pop up the Multi Satellite Search window.

6. Press blue colour key to pop up the TP

Search window.

FTA only, Scan Channel, Network Search:

Press keys to select the proper option.

Press OK key at the OK button to start searching.

2.2 CA

Select CAitem and press OK key, then you will enter
into its sub-menu which consists four items of About CA
Info, Change PIN, Change Signature PIN, Maturity
Level.

CA Slot

Insert the smart card with the golden chip facing down.
Push the smart card into the CA slot. Only a few
millimetres of the card should be visible outside the slot.

2.2.1 About CA Info

In About CA Info sub-menu, you can know the basic
information about this conditional access such as
Card Status, CAS System ID, Interface Version, Card
Number, Number of sessions, Country Indicator, and
Maturity Level.

2.2.2 Change PIN

Changes PIN window is designed for changing the

smart card's PIN, which is required if you want
change the maturity level settings.
In order to change the PIN, you must know the
current PIN also called the old PIN. Input the new
PIN and twice the PIN (New PIN and Confirm PIN
must be the same) your want to set. Move cursor to
OK button and press OK key, and then system will
pop up a dialogue informing you the changing result.

Note that the PIN can only constructed with Arabic numerals.

2.2.3 Change Signature PIN

Do the same way as the above Change PIN.

Note: The signature PIN will be locked after the
three erroneous attempts to enter the correct PIN. If
locked, please call the dealer for help.

2.2.4 Maturity Level

Input the PIN then Move cursor to Select Maturity level,you can select A-Over18,X­Erotic,G-General audience,PG-Parental Guidance,move cursor to Change Maturity level
button and press OK key,and then system will pop up a dialogue informing you the
changing result.

2.2.5 Subscription Status

Know the detail information of Subscription Status.

Know the detail information of Event Status.

2.2.6 Even Status

2.2.7 Token Status

Know the detail information of Tokens Status.

2.3 Factory Setting

Press OK key to enter into the Factory Setting
window.
Select Yes button and press OK key to return to the
factory setting. All searched channels and set
information will be erased.
Select No button and press OK key to cancel this
operation, or press MENU or EXIT key to cancel and
exit.

3. System Setup

1. Press OK key or key to move the cursor to

the right menu.

2. Press PR+, PR- keys to move the cursor up or

down.

1. Press OK key to enter into the Language

window. Press keys to select the language

in circle, while press PR+, PR- keys to move the

cursor up or down in circle.

2. Press MENU key or EXIT key to save and exit.

3. The types of the language, pleaser refer to the

configuration of the customer.

3.1 Language

3.2 Information

Press OK key to the Information window.

3. Digital Audio Out: Select between LPCM Out and BS Out.

3.4 Display Setting

1. Brightness: Press key to select from 0-

100.

2. Contrast: Press key to select from 0-100.

3. Saturation: Press key to select from 0-

100.

4. Hue: Press key to select from 0-100.

5. Sharpness: Press key to select from 0-10.

Press PR+, PR- key to move the cursor up or down,

while press keys to change the setting and

the setting will take effect immediately.

1. Video Resolution: Select among 1080p_24,

1080i_25, 1080i_30, 1080p_50, 720p_60, 720p_50,

576p, 576i, 480p, 480i, By Native TV and By source .

2. Aspect Mode: Select among Auto,4:3LB, 4:3PS

and 16:9 and Auto.

3.3 TV System

1. Summer Time: Select between ON and OFF.

"OFF" delegates the normal time. If select ON,

time will add one hour.

2. GMT Offset: When select "ON" in GMT Usage

item, system will get the date and time

information from the screen automatically. Date

and Time two items will turn grey. Select the

proper option in the GMT Offset item. The default

setting is GMT ON.

3.5 Local Time Setting

3.Date, Time: When select "OFF" in GMT Usage, Date and Time two items take

effect, while GMT Usage turns grey. Use numeric keys to input the desired value.5.

After setting, press MENU key or EXIT key to exit and save. If the value is invalid,

system will inform "Invalid input! Continue to edit?". Press OK key at the Yes button

to continue the modification, or press OK key at the No button to exit without saving.

2. Timer Service: Select between Channel or
Record.

3. Wakeup Channel: Press key to select
channel

3. Wakeup Date, On Time: Use numeric keys to
input the valid date.

Duration: Set the gap time. After waking up, system will power off automatically
after the duration time.

3.6 Timer Setting

If there is no program, you can not enter into this

window. There are 8 timers that can be set.

Select Timer up or down, and press OK key to

enter into the setting window.

1. Timer mode: The default mode is off. You can

set the timer once and daily.

Before entering into the Parental Lock window, you
need input the correct password. The default
password is 0000.

1. Menu Lock: Press keys to select between
Off and On. If select "On" , you can not enter into the
window before entering the password.

2. Channel Lock: Press keys to select
between Off and On. The default value is On.

3.7 Parental Lock

If select "On", you can not view the locked channel set in Chanel List Edit window until
you have inputted the correct password.

3. New Password: Use numeric key (0-9) to input the new password.

4. Confirm Password: Input the new password once again. Confirm password must be

the same as the New password. System will inform you "Change password successfully!"
while they are the same, or inform you to input the password of Confirm password once
again when they are not the same.

3.8 OSD Setting

1. OSD Timeout: Press keys to select from

1 to 10 by step1. The default values is 5.

2. OSD Transparency: Press keys to select
among Off, 10%, 20%, 30%, 40%. The default
option is Off.
Press MENU or EXIT key to save and exit.

3.9 Other

1. LNB Power: Select between Off and On.

2. Channel Play Type: Select among All, Free,

Scramble.

3. Channel Change: Select between Black Screen
and Freeze.

4. Auto Standby: Select between On and Off.

4. Tools

1. Press OK key or key to pop up the "Input
Password" dialogue, you can not enter into the
menu unless the correct password is inputted. The
default password is 0000.

2. Press PR+, PR- keys to move the cursor up or
down.

4.1 Network Local Setting

DHCP: Select between ON and OFF, when it ON, the
IP Address, Subnet Mask and Gateway item will turn
gray, you can not edit them.

Press number 0-9 the input the address.

4.2 WiFi Manager

4.3 Upgrade by Network

1. Protocol: Select between HTTP and FTP.

2. URL Type: Select between number and string.

3. URL: press number key 0-9 to input.

4. User: Press number key 0-9 to input the user name.

5. Press number key 0-9 the input the password.

6. Press OK key on star button to begin updating
Press green key to delete the number or characters
and press red key to switch the input mode.

4.4 Weather Forecast

Press green key to add city
Press yellow key to delete city
Press red key to update

Insert Wifi equipment first, then search available Enter net signal , input the password to
connect with network.

4.5 RSS Reader

Press red key to update
Press green key to add channel
Press yellow key to delete channel
Press blue key to edit channel

RSS Channel list is on the left side of window
RSS News list is on the right side of window
Press PR+, PR- key to select channel you wanted

5. Game

1. Press OK key or key to enter into the game.

2. Press PR+, PR- keys to move the cursor up or
down.

3. Select the game that you want to play and press

OK key to enter into the window.

6.1 Media Player

USB menu will be automatically shown when
insert U disk to USB port except auto scan, multi
picture, upgrade. Or open USB menu according
to Menu -> USB-> Media Player. Press OK to
enter into this window.
USB menu will be disabled when no USB device
is plugged. Media Play List will not be saved

when USB plug out or standby or power off.
Go into sub-directory when press ok key in the file directory, play the selected file
when scroll bar is on the file, automatic return USB menu after play is over.

6. USB

Red key: Press red key to enter the rename window,

you can rename the file by press number 0-9 on RCU.
Green key: Press green key to enter the copy window,
press key to select the place you want to copy
to, and press green key to begin copying.
Yellow key: Press yellow key to add the delete symbol
on your selected file, press yellow key again

the symbol will disappeared. Press OK key on the file with delete symbol, it will pop
up a dialogue: " Are you sure to delete ?" Select YES to delete and select NO to quit
without delete the file. and press EXIT key to quit without delete the file.
Blue key: Press blue key to enter the New Folder window, you can press number 0­9 to edit.

In edit window:

In music list

Press number key 1 to display the Sort window.
Press number key 2 to select the repeat mode.
The function of colour key is the same as Color key

operation

In video list

Press number key 1 to display the Sort window.
The function of colour is the same as Color key

operation

Show you the information in windows as besides.

Yellow key: Press yellow key to format the disk
Blue key: Press blue key to pop up DVR Set windw.

6.2 PVR Storage Information

In record list

Red key: Press red key to enter the rename window,

you can rename the file by press number 0-9 on RCU

Green key: Press green key to lock the file you selected
Yellow key: Press yellow key to delete the file you

selected.

6.3 PVR Setting

1. Time shift: Select between Off and On.

2. Timeshift to Record: Select between On and Off.

26

1.Upgrade File: Show the Upgrade File.

2.Upgrade Mode: Select between allcode, maincode, defaultdb, userdb and Dump. When
users switch the upgrade mode, Upgrade File will show the corresponding file
according to the table below:

6.4 Upgrade by USB

3.Press OK key on start button to start receiving the data from USB device.
When the USB device is not connected, this item is grey, you can not edit it now.

Upgrade Mode File feature

All code : File named as "*.abs"

Main Code: File named as *.abs

Radio back: File named as "*.abs",

the picture will be used

as both radio back and

menu back

Default db: File named as "*.abs"

Select the upgrade mode and upgrade file, then you can start upgrade by USB.

6.5 Remove USB device safely

Press OK on this item it will pop up a dialogue:"You can safely remove USB device

now! ", then you can move your USB device safely.

27

Press INFO key to pop up the Info bar.

Press INFO key again to pop up the program guide of

the current program.

7. Hot Key

7.1 Info

Press EPG key to enter into the EPG window.

1. Press PR+, PR-, keys to select up or down,

left or right.

2. Press red colour key to pop up the Time Bar

window. Press PR+, PR- keys to select up or down,

while press keys to select left or right in the

time bar.

: Press OK key at this button to return to the

EPG window.

7.2 EPG

: Press OK key at this button to move the cursor

to the current time line.

: Press OK key to push the time forward or

backward by half an hour.

: Press OK key to push the time forward or

backward by half an hour.

: Press OK key to push the time forward or

backward by a day.

4. Press green colour key to enter into the Timer window. You can add the current

program to the Timer. If 8 timers are already yet, system will inform you "Timer is

full!'.

3. Detail Information: In the EPG window, press PR+, PR- keys to select the

channel and program, and press OK key to know the detail information of the

current program.

Press FIND key on to pop up the Find window.

Use numeric keys to enter into the character and

use the colour keys to realized the corresponding

operation.

7.3 Find

28

Use the numeric keys (0-9) to input the number of the desired channel. If the

inputtednumber is beyond the valid channel number, system will "No such a

channel" and press OK key to close this message.

7.4 Number

In normal mode, press TV/RADIO key to switch between TV mode and Radio mode.

7.5 TV/RADIO

Press PR+, PR- keys to change the channel up or down. If in the all satellites group,

you can select channel in all searched channels. If in the specific satellite, only can

select channel in the satellite group.

7.6 Up/Down (Channel Change)

Press keys to change the volume. Press keys to decrease the volume,

while press keys to increase the volume.

7.7 Left/Right (Volume+/-)

Press key to turn off the volume. You can press key once again to restore

the volume, or press keys to increase the volume.

7.8 Mute

During the viewing, you can press PAUSE key to stop the picture while the volume

continues. You can play the picture by pressing PAUSE key once again.

7.9 Pause

7.10 OK

1. During the viewing or listening, press OK key to
pop up the TV program list or the Radio program list.

2. Press PR+,PR- keys to select the channel up or
down, and then press OK key to play this channel
in full-screen.

3. Press keys to select the satellite.

4. Press red key to switch among Free, scramble and HD channels list, press green key to
enter favorite list, you can add channels to different FAV group in this list, there are 8 FAV
groups. Press different color key to mark the channel with different FAV group symbol.Press
yellow key to enter edit program mode, press blue key to pop up A-Z window.

29

1. Press key to enter into the Audio window.

2. Press keys to select among Left, Right,
Stereo, and Mono.

3. Changing the audio mode is only connected with
the current channel, not all the channels.

4. Press MENU or EXIT key to close this window.

7.11 Audio

Press key to switch the current channel to the previous channel.

7.12 Recall

1. Press FAV key to pop up the favourite group
window.

2. Press keys to select the favorite group.
Press PR+, PR- keys to select the channel up or
down. Press OK key at the selected channel to
view it in full-screen. Press MENU or EXIT key to
exit.

3. If there is no favorite channel, system will inform
" No FAV Channel!" when you press FAV key.

7.13 FAV

1. Press ZOOM key to switch among Zoom*1, Zoom*2, Zoom*3, Zoom*4, Zoom*5,
Zoom*6, Zoom*8, Zoom*12, Zoom*16.

2. In zoom mode, press PR+, PR- keys to move the cursor up, left, right, down.

3. Press MENU or EXIT key to exit

7.15 Zoom

Press TXT key to open the teletext on the screen. If there is no teletext, system will inform
"No Teletext Data". Press EXIT key to exit.

7.14 Teletext

Press F1 key to pop up the Sort drop-down list.
Name(A-Z): The ascending order, omitting the $
character, the number is ahead, then the capital letter,
at last the lowercase.
Name (Z-A): The opposite order of the above Name
(A-Z).
Free/Scramble: All FTA programs are listed ahead,
while all scrambled programs are listed last.
Lock: all locked programs are listed at the last.
Press F2 key to pop up TP list, press FIND key to pop up FIND window, press EPG key to

pop up CA type list.

30

Problem Possible causes What to do

The display on the front
panel does not light up.

No sound or picture, but the
front panel shows red light.

Main cable is not connected.

The is in standby mode.receiver

Check that the main cable is plugged into
the power socket.

Press the standby button.

No sound or picture.

The satellite dish is not pointing at the
satellite.

Adjust the dish. Check the signal
level in the Antenna Setup menu.

No signal or weak signal.

Check the cable connections, LNB and
other equipment connected between the
LNB and the receiver, or adjust the dish.

Bad picture / blocking
error.

The satellite dish is not pointing at
the satellite.

Adjust the dish.

Signal is too strong.

Connect a signal attenuator to the LNB
input.

Satellite dish is too small.

Change to a larger dish.

LNB noise factor too high.

Change to an LNB with lower noise
factor.

The LNB is faulty.

Change the LNB.

The RCU is not working.

Battery exhausted.

Change the batteries.

RCU is incorrectly aimed.

Aim RCU at the , or check that
nothing blocks the front panel.

receiver

Note : If you have tried all of the actions suggested above, without solving the
problem, please contact your dealer or service provider.