Tiesse Levanto 100, Levanto 110, Levanto 310, Levanto 410, Levanto 141 Quick Start Manual
Levanto
Quick Start Guide
ver. 2.1
Published by:
Tiesse S.p.A.
Via Asti, 4
10015 IVREA (TO)
Italy
Copyright © 2008-2014, by Tiesse S.p.A.
All Rights Reserved.
Intellectual property rights:
Registered trademarks, trademarks, authors’ rights and all other names contained in this document
are property of their respective owners.
Tiesse S.p.A. respects others’ intellectual property rights and asks its clients and users to do the
same.
Last update: March 17, 2015
SAFETY INSTRUCTIONS
In case of a model without the ON/OFF switch, place the device as close as possible to the 230V
wall outlet. The mains plug must be easily accessible.
Do not place the system where the power cable can
be stepped on.
Do not place objects on the power cable.
If you need to disconnect the power for maintenance
operations, be sure to unplug the power cable from
the wall socket.
GSM antennas or RF, where the router model requires
their use, must not be placed in a stable manner at a
distance of less than 20 cm from all persons.
SIM INSERTION/EXTRACTION
(only for models in which it is provided)
Refer to the SIM Installation User Guide, available on Tiesse's website: http://www.tiesse.com
CAUTION! Before removing the cover:
Turn off the device
Unplug the telecommunication cables (xDSL, ISDN)
Unplug the power cable from the wall socket
Unplug GSM or RF antenna if present
After you worked on the router:
Close the device and secure the cover as shown in the instructions
Plug the power cable into the wall socket
Plug the telecommunication cables (xDSL, ISDN)
Plug GSM or RF antenna if present
Turn on the device
IN CASE OF MALFUNCTION OF THE DEVICE
Do not intervene, in any way, on the device
Contact Tiesse via e-mail at support@tiesse.com to begin the process of repair or
replacement under warranty.
EMC, R&TTE and RoHS conformity
Tiesse S.p.A. ensures that Imola products meet the essential requirements of European Directives;
2004/108/EC - EMC Directive
99/5/EC - Radio and Telecommunications Terminal Equipment (R & TTE) for devices
equipped with radio interface
201/65/EU - RoHS directive (Restriction of Hazardous Substances) to limit the use of
hazardous materials in the manufacture of electric or electronic devices
and with the relevant harmonized technical standards.
The devices are designed to meet the requirements for exposure to radio waves, defined according
to scientific guidelines and taking into account the safety margins necessary to ensure the
protection of people, regardless of the state of health and age. The guidelines for exposure to radio
waves use a unit of measurement known as the Specific Absorption Rate, or SAR. Declarations of
Conformity and the User Guide are available at Tiesse's website (http://www.tiesse.com).
RAEE conformity
USER INFORMATION
According to art. 26 of Legislative Decree March 14, 2014, n.49:
"Implementation of the Directives 2012/19/EU, on electrical and electronic
equipment waste".
The crossed-out trashbin symbol on Tiesse's router and packaging, indicates
that the product must be collected separately form normal waste at the end of
its life.
The recycling of this equipment at the end of its life is organized and managed
by Tiesse S.p.A..
The user who wishes to dispose of this equipment must contact Tiesse S.p.A. by e-mail at
support@tiesse.com address and follow the system that Tiesse has adopted to allow the separate
collection of the device at end of life.
The separate collection for the subsequent recycling, treatment and environmentally compatible
disposal of the device, helps to prevent negative effects on the environment and health and
promotes the reuse and/or recycling of the materials making up the equipment.
Illegal dumping of the product by the owner involves the application of administrative sanctions
provided by law.
Terms of use
The module Levanto and all its components must be used solely and exclusively for the purpose for
which they were appointed. Tiesse disclaims any liability caused by improper or clumsy use of the
module or one or more parts of which it is composed. So be sure to make a proper maintenance of
the entire system.
Loading...