Tie Down Quik-Set Stabilization Plate User Manual

Part #59291

Conditions

• The associated anchor used with this plate
must be a soil auger anchor and must be
approved by the authority having jurisdiction
and installed in accordance with the approved
installation instructions in the soil type or
range of soil types approved for the anchor.

• Minimum allowable tie angle of 40 degrees
from vertical

• Maximum tie design load of 3150 pounds

• Minimum required soil test probe torque value
of 200 inch pounds at the level of the plate

Instructions

1. Install ground anchor inside skirting line at a
slight back angle of 10˚ - 15˚.

This side faces away

from home

2. While anchor head is still 5" to 6" above
ground level: install Quik Set stabilization
plate around anchor shaft, referring to the
direction imprinted on the top of the plate.

10˚-15˚

5" to 6"

Home

Direction

Home

Direction

3. Install ground anchor until Quik-Set plate is
fully set. Hammering may be required at the
corners to insure plate being fully driven.

4. Install strap(s) to anchor head and pretension
according to approved methods. Maximum anchor
load in conjunction with the "Quik-Set" device is
4725 lbs. (ultimate).

* Patent Pending

072402,338