TIE Bluetooth 4.1 Headset User Manual

USER MANUAL

Wireless Bluetooth Headphones

1

Product Overview

Turning On | Off

Turning on: Press and hold MFB for 4 seconds

until blue LED flashes
Turning off: Press and hold MFB button about
4 seconds until red LED flashes

Indicator light Multi-Function Buttons

Volume+/Previous song Volume-/Next song

USB charging port Microphone

Connecting

Multi-pairing

1) Keep your Bluetooth device within 1 meter when
pairing;

2) Make TIE enter pairing mode as shown:
Ensure TIE is off. Press and hold Multi-Function
Button for approximately 8 seconds until red and
blue LED flash rapidly;

3) Using your Bluetooth device, please scan/search
for available Bluetooth devices select “TIE” from
the list of devices shown;

4) If prompted, enter password or PIN No: “0000”

5) If prompted by your mobile phone to connect,
select “Yes”(this will vary among mobile phone
models)

6) After successful connecting, blue LED of headset
will flash twice every 4 seconds

TIE can connect with two Bluetooth cell phones at the
same time. The general pairing procedures are as
follows:

1) Pairing TIE with device A

2) Turn on TIE and make it enter pairing mode again,
and pairing it with device B

3) Operate device A to connect with headset. TIE has
already connected with two devices in this moment