TiCad CANTO Read Me First

READ ME FIRST

TiCad CANTO

2 3 4

READ ME FIRST

TiCad CANTO

SETTING UP YOUR TROLLEY

Fitting the shaft:

1

Insert the shaft

2

Insert the shaft through the long hole as far as it will go

3

Press shaft against the inside spring and turn it to the left

4

Continue turning until the shaft engages

(brake faces upwards)

5

Dissemble in reversed order

*Glass-fibre reinforced plastic (PA 6 GF 30)

1 3

42

Congratulations!

You have chosen an excellent product manufactured by TiCad! All
of our high-quality products are carefully handmade at our pro­duction facility in Altenstadt (Hessen, Germany).

To ensure that you will be able to enjoy your trolley for a very long
time, please take some time to carefully read through these oper­ating instructions, which contain important information that will
make using your trolley a lot easier.

If you have any further questions regarding the use or care of your
trolley, please contact your TiCad dealer.

We would like to wish you many enjoyable games

of golf and a lot of success! Your TiCad team.

YOUR TICAD CANTO IN DETAIL

1 Delta leather handle
2 Umbrella adapter
3 Score nuts
4 Drawbar
5 Drawbar adjuster
6 Top bag holder
7 Fastening straps
8 Centre bar
9 Shaft

10 Locking brake
11 GRP* wheel
12 Bottom bag holder
13 Front GRP* wheel
14 Invisible shaft fastener
15 Bottom bar
16 Front shaft
17 Knurled sleeve

1

2

3

3

4

5

6

7

9

12

14

15

16

17

11

13

10

8

Image:
TiCad Canto with GRP* wheels,
also available as
TiCad Canto with TiTec titanium wheels

Setting up your trolley:

The frame of your TiCad trolley is easy to set up and fold together.
To do so, push the bottom bar right down until it reaches the bot-
tom limit stop and the centre bar right up until it reaches the top
limit stop.

Bag holder:

Both bag holders are attached to the trolley with expansion
bolts. The expansion bolts must not be turned in too far (see
images), because there has to be a gap between the expansion
bolts and the start of the threads. To fit the bag holder, insert it
into the frame and then align and fix it into place by twisting the
bag holder.

©

2017 TiCad GmbH & Co. KG – All rights reserved.

Expansion bolt turned in too far

Bag holder Expansion bolt in the correct position

Removing and attaching the wheels

1

2

3

4

17

13

Setting up your trolley:

The frame of your TiCad trolley is easy to set up and fold together.
To do so, push the bottom bar right down until it reaches the bot­tom limit stop and the centre bar right up until it reaches the top
limit stop.

Bag holder:

Both bag holders are attached to the trolley with expansion
bolts. The expansion bolts must not be turned in too far (see
images), because there has to be a gap between the expansion
bolts and the start of the threads. To fit the bag holder, insert it
into the frame and then align and fix it into place by twisting the
bag holder.

USING YOUR TROLLEY

Always move your TiCad trolley slowly and carefully when
moving over rough ground that contains stones or pot­holes. Avoid kerb stone edges.

Umbrella adapter:

The umbrella adapter is located at the top end of the drawbar.
Screw the umbrella holder into the tapered adapter.

Umbrella adapter with umbrella holder

Locking brake:

The locking brake has to be fitted on the left wheel. To open and
apply the brake, simply move the locking lever back or forward.

Locking brake when open Locking brake when applied

Adjusting the drawbar:

As soon as the golf bag has been attached to the TiCad trolley, you
can adjust the drawbar to a comfortable height for you. You can
loosen the drawbar by turning the black handle counter-clock­wise 3 to 4 times. Only start moving the drawbar into the right
position once it has been completely freed and moves without re­sistance. To fasten the drawbar, turn the black handle in the oppo­site direction. When doing so, move the drawbar slightly up and
down to allow the fastening mechanism‘s teeth to fully engage
with one another and to prevent them from becoming damaged.

Adjusting the drawbar

Attaching the golf bag:

To fasten the golf bag, insert one of the round fasteners into the
strap of the opposite fastening strap. When doing so, make sure
not to flick the fasteners, as this may cause injury. To undo the fas­tening straps, hold on to the bottom strap and then remove the
top fastening strap with your other hand.

We recommend fitting the drawbar only once the golf bag
has been attached to prevent the trolley from tipping over.

1

2

3

4

5 6 V 17– 01

YOUR NOTES

Technical data and dimensions

Model TiCad Canto

Weight of frame and wheels 3,9 k g

Pack size 68x38x14 cm

PUBLISHER

TiCad GmbH & Co. KG, Heegwaldstr. 3–5, D-63674 Altenstadt
www.ticad.de

The above information, wording and images have been largely
standardised and are primarily intended to describe the trolley‘s
basic functions. For this reason, the product supplied to you may
slightly differ from the above descriptions, in particular if your
trolley is a new version. This „Read Me First“ manual must not be
copied or used otherwise in whole or part without TiCad GmbH
& Co. KG‘s consent.

Please carefully retain your Read Me First manual and the origi­nal packaging.

Please read our General Terms and Conditions of Business www.
ticad.de.

Concept et réalisation graphique :

Bild, Satz und Sieg – Eugen-Kaiser-Straße 18, 63450 Hanau
www.bild-satz-und-sieg.de

READ ME FIRST

TiCad CANTO

Care:

The frame of your TiCad trolley is made of a high-quality, rust­proof material and has been sealed to keep out rain. The frame
can be cleaned with a conventional household cleaning product
– but not with abrasive cleaners. The titanium‘s shine can be re­stored with a special cleaning oil available from TiCad. The hubs
of the wheels and the couplings must not be oiled or greased.

WARRANTY

Your TiCad trolley has been designed and built with great care.
Please get in touch with your TiCad dealer if you notice anything
unusual. The provision of spare parts or repairs performed un­der warranty do not extend the warranty period. The warranty
does not apply to damage caused by carelessness or rough han­dling, overloading the trolley, inappropriate operation, external
force, submersion in water and unauthorised persons‘ actions.
The warranty only applies if the enclosed operating instructions
have been observed and the trolley is being appropriately used
and cared for. Technical changes and new developments do not
entitle warranty holders to upgrades.

The warranty period for the titanium frame and the wheels is 5
years from the date of purchase. The warranty does not apply to
wear parts such as e.g. tyres, leather handle, fastening straps.

SERVICE

If you experience any problems with your TiCad trolley, please
first contact your TiCad dealer, one of our service centers or get in
touch with us at our office in Altenstadt, Germany.

We will then arrange for your TiCad trolley to be collected and
returned to us and help you with the packaging material. If you
want us to perform an inspection or repair, we also offer to assist
you directly without contacting your TiCad dealer.

For trolleys located outside Germany, please always first contact
your local service staff.

Postal address: TiCad GmbH & Co. KG

Heegwaldstr. 3–5
D-63674 Altenstadt -Waldsiedlung

Phone: [phone]
Fax: [phone]
E-Mail: [e-mail]