l OOuuttddoooorr PPaattiioo SSppeeaakkeerr MMooddeellss
TIC
Outdoor
Weatherproof Design
Pair
Brackets included
Full
speaker
4”-6.5”
1” aluminum tweeters
Surge protected
Teflon® sealed
8 Ohm Impedance
ASP60 & ASP120 w/
Commercial Installations
180° multi mount system
ABS Im
Enclosure
Black (B) or White (W)
Thank You for purchasing another high quality audio
product from TIC Corporation. Please read the enclosed
installation guidelines carefully and thoroughly to ensure
years of trouble free service from your new TIC exterior
audio products.
…….…...
3
4
4
5
5/6
7
7
7
9
Carefully unpack your new TIC exterior product and
save all packaging materials for possible future use. Check
that your new TIC product contains all system parts
detailed in the Components list. Do not attempt to operate,
install or use your
appear missing or damaged. If so, please notify TIC
Corporation
!WARNING!
keep all pl
or your TIC Dealer as soon as possible.
to avoid possible suffocation or injury please
new
TIC product if any components
astic bags away from
children and pets
.
CCoommppoonneennt
2x
2x
ASP60 & ASP120
models
1x
1x
1x
t LLiisstt……
Outdoor
Mounting swivel brackets and
screw connectors per pair
Include optional 70v switching
assemblies
New product offer (enclosed
with lite
Instruction Manual
Warranty Card
Patio
rature)
Speakers
PPrree--IInnssttaallllaattiioonn…
Need Professional Help?
Please read this owners guide carefully before installation. Failure to follow
these instructions fully or incorrect installation may damage your
products and any third party equipment used in your new system
This may also Void any warranty for your new TIC products. If you are unsure
of your ability to fully understand and fully complete the installation of this TIC
product, p
Note:
components prior to exterior installation. Test your components near a mains
power and, if required,
perhaps inside. Ensure all components are working smoothly and correctly
before exterior placement and operation.
lease consult a professional installer.
TIC Corporation always recommends that you test your product and its
…
receiver
amplifiers source
somewh
new TIC
installation
ere convenient,
.
EExxtteerriioor
Before you begin
carefully select the
or obstacles in the wiring path.
In general;
r IInnssttaallllaattiioonn……
the installation of your new TIC outdoor product,
locations of your new TIC products
1. Select a reasonably
the installation of your new TIC outdoor
prevent mo
ensure more uniform sound dispersion.
2. Ensure your new TIC outdoor speaker cables or power source if
required, can easily reach your new speakers. Ensuring that there are
no obstructions or difficulti
feature impediments. If the cable is surface mounted you must make
sure the cable is placed where it cannot be tripped over, pulled,
abraded or crushed.
3. Wherever possible avoid long term exposure of your new TIC o
speakers to chlorinated solvents, acids such as those often contained
in fertilizers and other solvents which have the potential to eventually
wear the components prematurely.
4. When installing either burial cable or TIC’s in-ground outdoor speakers
please be very aware of any
plumbing, piping such as sprinklers or irrigation and
wiring already in
vement or excessive vibration during use. This will also
clean, reasonably structurally sound
es such as concrete paths or architectural
existing in-wall cable,
place
.
noting any impediments
patio
speakers. This will
submerged
any sub-surface
please
surface for
utdoor
Carefully unpack and check components
Run speaker test prior to exterior installation
A not
e on Speaker Cable;
TIC recommends the use of our SPC
quality speaker cable, however just about any reasonable speaker cable may
be used including existing runs tha
installations of 10 – 25ft., just about any 16/18 gauge 2 core cables can usually
be used although we would prefer a double insulated or burial spec cable be
used. For longer runs of 25 – 100ft. 10/14 gauge cable can be u
resistance down the line will become a contributing factor.
Please visit TIC Corporations website at
Audio Installation Basics articles under Technical Resources for mor
exterior audio and
An Important note on
Pleasure proper polarity when connecting your new TIC outdoor speakers.
This is very important and will result in poor sound reproduction and possibly
equipment damag
ensuring + to + and – to – or as sometimes color coded Red to Red and Black
to Black from your amplified source to your speakers respectively.
5. Once you have checked the components and tested the
for exterior install, recheck your cable runs carefully marking the correct
channel for each speaker.
6. Mount your speakers carefully using the supplied mounting brackets for
each patio speaker.
7. Connect you new TIC Patio Speakers at the speaker
enough “play” in the cable to allow angle adjustment as necessary.
8. Reconnect the speakers to your receiver amplifier being careful to
ensure correct “Polarity” matching.
9. *for 70v systems note diagram below;
cable guidelines.
Polarity
e if not connected correctly. This is normally avoided by
!
30, 50 or 100’ double insulated high
t may be in place. For standard 8
sed however
www.ticcorp.com
and review the
system ready
end first ensuring
e in depth
TIC ASP60 & ASP120 models
only
Once connected properly,
and enjoy
Disclaimer;
TIC Corporation will in no way be held responsible for the improper or
unsecured installation of this product. Any and all damage arising from the
installation or use of this product is the purchaser and
responsibility.
MMaaiinntteennaannccee…
Occasional maintenance of your TIC products cannot hurt and may help
greatly. In
particulate matter from impeding or building up around the output grill area. The
units may be cleaned using very mild detergents like dishwashing liquid if
desired. A hose with clean water
pressure or forcing water into the grill or acoustic ports.
another successful installation of a TIC outdoor product
…
spect the installation area
test the system at low volume first and then,
final
installer
regularly
may also be used but please avoid using high
removing and twigs, dirt or
sit back
!
’s sole
In very cold climates with moderate to heavy snowfall an old trick from the
major theme parks we supply world wide is to place a plastic bag over the
for the winter or periods it may be
CCuussttoommeer
For any additional help please contact TIC Corporation at (800) SPX-OMNI, on
line at
happy to assist you at any time. Also please visit our website for FAQ
(frequently asked questions) and full contact information.
WWaarrrraanntty
TIC Corporation offers a full,
warranty on all its products as standard however there are other 3 and 5 year
warranties in use with various TIC authorized Dealers world wide. Please check
your enclosed Warranty card
applies to you. Also please note TIC Corporation General Terms & Conditions
posted on our website at
r SSeerrvviiccee……
www.ticcorp.com
y PPeerriioodd……
, or by email at
www.ticcorp.com
not in use or
info@ticcorp.com
UCC approved, one year full parts and labor
or your Dealer receipt
under such snowfall.
where we would be
to
find out which one
for further information.
unit
IInnssttaallllaattiioon
Please note
n NNootteess……
series vs. paral
lel installation wiring choices below;
TTrroouubblle
Problem
No Sound
No Sound from one
speaker
e SShhoooottiinngg……
Please Check
Check the speakers are connected to the cable
correctly.
Check the speaker cable is connected to the receiver
amplifier correctly.
Check the receiver amplifi
mains, is not on “mute”, has no headphones attached
and that the Channels used for the exterior speakers
(usually A or B) is in operation.
Refer to the owners guide that came with your
receiver amplifier.
Most initial problems are simple
try a different connection cable to your outdoor
speakers or equipment
Check the “balance” control on your receiver
amplifier.
Check all
speaker.
1. Disconnec
receiver amplifier connection/ channel. Switch the
cord from the non-operating speaker from its current
connection to the “working” speaker connection. If
the speaker now works the problem is your receiver
amplifier.
2. Rec
at the “working” speaker directly and connect it
directly to the non-working speaker. If the speaker
now works the problem is somewhere in the original
speaker cable.
3. If the speaker still does not work the pr
speaker.
connections and cable to the inoperable
t the “working” speaker from the
onnect as original. Remove the speaker cable
er is powered “on” at the
connectivity, please
.
oblem is the
One speaker sound
distorted, lower
volume or “different”
Treble or Bass
s
Follow same procedure as above for “No Sound”.
Check the “tone” setting on your receiver amplifier.
Adjust the Treble and Bass settings on your receiver
am
plifier.
Check the connections carefully from the amplifier to
your speakers and ensure correct Phase (+ to + and
–
to – accordingly). Poor sound replication is
expected from a speakers or speakers out of
or
TIC Corporation engages in continual product research and development, new
materials, production methods and design improvements. TIC Corporation therefore,
reserves all rights to change or improve products specifications without notice.
2.5 Lbs
8.5x13x6
6
Lbs
9.8x7.2x6.5
8.9x15.4x11 9.8x17.7x13
15.5
TIC Corporation
15224 East Stafford Street
City of Industry, CA. 91744-4418 U.S.A.
Tel: (
626) 968-0211
Email:
info@ticcorp.com
(5 lines)
5 Lbs
Lbs
WWW:
12x8.6x7.
7
Fax: (
626
www.ticcorp.co
6
.5 Lbs
21
Lbs
) 968-1363
m
6.
6x5.6x
3.3
16x9.6x8.7
7.5 Lbs
Lbs
8.9
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.