Thank You for purchasing another high quality audio
product from TIC Corporation. Please read the enclosed
installation guidelines carefully and thoroughly to ensure
years of trouble free service from your new TIC exterio
audio products.
t …………………….…….
……… …………….... 5
fications …………….….. 10
3
4
6
7
7
7
7
r
Carefully unpack your new TIC exterior product and save
all packaging materials for possible future use. Check that
your new TIC product contains all system parts detailed in
the
Components list. Do not attempt to operate, install
use your
missing or damaged.
your TIC Dealer as soon as possible.
!WARNING!
new
TIC product if any components appear
If so, p
to avoid possible suffocation or injury please
keep all plastic bags away from
lease notify TIC
Corporation
children and pets
or
or
.
CCoommppoonneennt
1x
1x
1x
1x
2x
1x
1x
1x
t LLiisstt……
AMP10 Outdoor Receiver Amplifier
AM/FM Antennae
2.5 to 2.5mm jack plug cable
Mains to 12v power cord & transformer
Speaker connection cables
New product offer (enclosed with literature)
Owners
Warranty Card
Ins
truction
Guide
Manual
Need Professional Help?
Please read this owners guide carefully before installation. Failure to follow
these instructions fully or incorrect installation may damage your new TIC
products and any third
This may also Void any warranty for your new TIC products. If you are unsure
of your ability to fully understand and fully complete the installation of this TIC
product, please consult a professional i
Note:
TIC Corporation always recommends that you test your product and its
components prior to exterior installation. Test your components near a mains
power and, if required,
perhaps inside. Ens
before exterior placement and operation.
ure all components are working smoothly and correctly
party equipment used in your new system
receiver
nstaller.
amplifier source somewhere convenient,
installation
.
LLeeggeennd
Front
d ffuunnccttiioonnss……
;
AMP10 Receiver Amplifier
Basic Functions
1 & 7
2 & 8
Volume increase or decrease
Radio Tuning
Scan Stations
3
AM or FM select
4
Mode
5
6
9
10
11
*below: inputs
Fascia on/ off or pause
Preset Stations
Select input device
Mono or Stereo output
are
self described
exterior use equipment. Please take precautions.
WARNING!
PPrree--IInnssttaallllaattiioonn…
1. Carefully unpack your new AMP10 receiver Amplifier and check all
supplied
2. TIC always recommends that our customers test their new purchase
prior
units basic operation before installation
3. Once you have tested your
working properly prior to exterior installation, please find a safe, level
and stable surface
compon
to any exterior installation to ensure their familiarity with the
There is no requirement for the customer to
open this unit for any kind of operation or
maintenance.
Ensure rear main power switch is in
position when not in use.
Keep the unit away from high temperatures,
excess
enclosed areas that prevent natural air
cooling or excessive
Avoid any shocks, high vibration or sudd
impacts or collisions to the unit.
The AMP unit is weatherproof to a certain point
and not expected to be exposed to excessive
moisture.
The 12v power connection at the unit is fairly
water tight however the mains power 3-prong
plug is not, anymore tha
like your
…
ents
on which
Doing so
ive
water, chlorinated solvents or
electric
carefully
new TIC product to ensure everything
to operate you new receiver amplifier
will
void the warranty
dirt and
lawnmower or other
particulate matter.
n other exterior devices
the “off”
flow
electrical
.
en
is
Disclaimer;
TIC Corporation will in no way be held responsible for the improper or
unsecured installation of
installation or use of this product is the purchaser and final
responsibility.
An Important note on Polarity!
Pleasure proper polarity when connecting your new TIC outdoor
speakers. This is very important and will result in poor sound reproduction
and possibly equipment damage if not connected correctly. This is normally
avoided by ensuring + to + and – to – or as sometimes color coded Red to
Red and Black to Black from your amplified
respectively.
this product. Any and all damage arising from the
installer’s sole
source to your speakers
EExxtteerriioor
This TIC
1. Installation of your amplifier should consider a safe, o
2. Connect any pre-run
3. Connect any inpu
4. Connect the rear 12v power cable to your AMP10 and then tighten the
5. Connect the rear cable to the supplied 12v transformer.
6. Connect the power mains cable
7. Switch the unit “on” using the rear silicone material clear
8. Switch the unit “on” using the front fascia on/off/ pause push switch
9. Choose your listening “Mode”. Note: the unit is factory preset in Radio
10. Select desired input device
11. Test the unit using as many “modes” of operation as you can to
r IInnssttaallllaattiioonn……
AMP10
dust free position not too far from a mains outlet and not exposed to
excess water
AMP10
your AMP10
connection securely.
wall mains 120/110v
of this connection
dry
environment
rocker switch
mode to begin initially
ensure a correct trouble free exterior installation
exterior receiver amplifier can connect to and operate
three different sound sources at any one time.
, dust, particulate matter
outdoor
receiver
amplifier
t devices such as your CD/ MP3
receiver
amplifier
. Please be especially cautious with the integrity
to dangerous mains power. Ensure its
.
Step by step…
speakers or output devices to your
to the
CD, MP3
ff the ground,
or human traffic conditions
/Ipod
12v transformer
or radio/ mic’s input/ output
players etc. to
and then to the
in a safe and
covered
Sit back & Enjoy!
TIC Corporation wishes you m
from your new TIC Corporation exterior audio product
any years of pleasure
GGeenneerraal
l OOppeerraattiioonn……
P
ower
the unit “on” by using both the rear silicone covered
rocker switch and then the front fascia touch switch the unit will
default to FM receiving mode. You may then use the
switch to cycle to a different sound source.
Volume
down to continuously change volume levels
Pause
Pause
Switching Mode(s)
The front panel LCD scr
Mode
will show CD. Press the Mode button again to switch to the
input source you desire
Radio
buttons and agai
Radio Station Settings
one frequency at a time (FM: 0.5mHz, AM: 9kHz)
FM/AM
bands
Automatic Radio Station Searching
i
nitiate automatic station searching mode. There will be a slight
pause as a station is found. Press any button to exit
Radio Stations Preset Memory
radio, to save the current radio station your enjoying, press the
Preset
show “CH01”. Press the
number preset you prefer.
There are 30 channels to choose from in both the AM and FM
bands.
To exit this selection process, simply press the
the system remains idol it will also automatically exit this
function
Select Preset Station(s)
the
CHXX shown will represent the current preset channel
the
stations
selections
Karaoke; please simply
; press Vol+
; press the
or
Play
button to switch to “
; while receiving press and hold the
selection; press the
butto
n to initiate station storage. On the display it will
Select
Tune+
button and the LCD display will show “CHXX”. The
or
Tune- to select from your pre stored radio
. Press the
or
Vol- to control Volume. Press and hold
on/off
n to stop auto searching
switch which will first cycle through
; Initially the unit is in Radio receiving Mode.
een will show FM/AM. Simply press the
Aux
”. When choosing CD the display
; press the
AM/FM
; when listening to your am/fm
Tune+
Select
plug your microphones in and enjoy!
or
Tune- to select which
; while listening to your radio, press
button again to exit from your
Tune+
button to switch between
Tune+
or
Tune- to change
; press the
Select button. If
or
Scan
Mode
Tune
-
button to
. Press
MMaaiinntteennaannccee…
Occasional maintenance of your TIC products cannot hurt and may help
greatly. Inspect the installation area
particulate matter from impeding or building up around the unit or the
grill area. The units may be cleaned using very mild detergents like
dis
hwashing liquid if desired. A hose with clean water may also be used but
please avoid using high pressure or forcing water into the grill or acoustic ports.
In very cold climates with moderate to heavy snowfall an old trick from the
major theme parks we supply world wide is to place a plastic bag over the unit
for the winter or periods it may be
CCuussttoommeer
For any additional help please contact TIC Corporation at (800) SPX-OMNI, on
line at
happy to assist you at any time. Also please visit our website for FAQ
(frequently asked questions) and full contact informati
WWaarrrraanntty
www.ticcorp.com
y PPeerriioodd……
…
r SSeerrvviiccee……
, or by email at
regularly
not in use or
info@ticcorp.com
removing and twigs, dirt or
under such snowfall.
where we would be
on.
output
TIC Corporation offers a full, UCC approved, one year full parts and labor
warranty on all its products as standard however there are other 3 and 5 year
warranties in use with various TIC authorized Dealers world wide. Please chec
your enclosed Warranty card or your Dealer receipt to find out which one
applies to you. Also please note TIC Corporation General Terms & Conditions
posted on our website at
www.ticcorp.com
for further information
.
k
IInnssttaallllaattiioon
n NNootteess……
Some notes on your new AMP10 outdoor receiver amplifier…
Problem
Power on but the LCD
screen does not
display?
No Sound?
Power plug is
incorrectly connected
Output device wire i
incorrectly connected
Choose a suitable
sound source
The Speaker
connection is
unsecured
Cause
Check and secure the
power connections
s
Check and secure the
output devices
connections
Use the Mode button to
choose an operating
sound source
Check and secure the
connection(s)
Correction
TTrroouubblle
Problem
No Sound
No Sound from one
speaker
e SShhoooottiinngg……
((ggeenneerraal
l oouuttppuutt ddeevviicceess,, ssppeeaakkeerrss))
Please Check
Check the speakers are connected to the cable
correctly.
Check the speaker cable is connected to the receiver
amplifier correctly.
Check the receiver amplifier is po
mains, is not on “mute”, has no headphones attached
and that the Channels used for the exterior speakers
(usually A or B) is in operation.
Refer to the owners guide that came with your
receiver amplifier.
Most initial problems are connect
different connection cable to your outdoor speakers
or equipment
Check the “balance” control on your receiver
amplifier.
Check all
speaker.
1. Disconnect the “working”
receiver amplifier connection/ channel. Switch the
cord from the non-operating speaker from its current
connection to the “working” speaker connection. If
the speaker now works the problem is your receiver
amplifier.
2. Reconnect as original. Remove the speaker cable
at the “working” speaker directly and connect it
directly to the non-working speaker. If the speaker
now works the problem is somewhere in the original
speaker cable.
3. If the speaker still does not work the problem is the
sp
.
connections and cable to the inoperable
eaker.
wered “on” at the
ivity, please try a
speaker from the
One speaker sound
distorted, lower
volume or “different”
Treble or Bass
s
Follow same procedure as above for “No Sound”.
Check the “tone” setting on your receiver amplifier.
Adjust the Treble and Bass settings on your receiver
amplifier.
Check
your speakers and ensure correct Phase (+ to + and
–
to – accordingly). Poor sound replication is
expected from a speakers or speakers out of
or
the connections carefully from the amplifier to
phase.
polarity
C AAMMPP1100 OOuuttddoooorr RReecceeiivveerr AAmmpplliiffiieerr
TTIIC
GGeenneerraal
l SSppeecciiffiiccaattiioonnss
Power Supply 110V/DC 12V 4A
AM/FM Tunable
frequency range
Tunable S/N FM 75dB AM 41dB
Continuous/peak
Frequency Response 40HZ-16KHZ
AMP S/N >80dB
Sensitivity 1W/1m:80dB
Impedanc
Input
Output
Supplied Waterproof connector
Color Black
Unit Dimensions 7.9”L×4.7”W×2.2”H
Unit Weight 2.6lbs
Pack Dimensions 16.1”W×15.0”L×13.4”H(24PCS)
Pack We
ight 64lbs(24PCS)
FM:87.00MHz-108.00MHz
AM:522KHz-1620KHz
2.
5W/5.0W
e 4-
8ohm
AM/FM built in, CD/MP3
phono, i
4x speakers
pod
/mics/ wireless to jack
/other
to
UPC 7 35120 50000 9
Master Carton 8pc.
TIC Corporation engages in continual product research and development, new
materials, production methods and design improvements. TIC Corporation therefore,
reserves all
rights to change or improve products specifications without notice.
TIC Corporation
15224 East Stafford Street
City of Industry, CA. 91744-4418 U.S.A.
Tel: (
626) 968-0211
Email:
info
@ticcorp.com
(5 lines)
WWW:
Fax: (
626
www.ticcorp.com
) 968-1363
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.