Contents
1. Safety Information .............................................................................................. 2
1.1. Installation location ........................................................................................... 3
1.2. Warning ............................................................................................................ 3
1.3. Cleaning and maintenance ............................................................................... 3
1.4. Before moving the appliance ............................................................................ 3
1.5. Storm ................................................................................................................ 3
1.6. Do not drop small items or a liquid into the appliance ...................................... 3
1.7. Repacking the appliance .................................................................................. 4
1.8. Batteries ........................................................................................................... 4
2. Introduction ......................................................................................................... 5
3. First time setup ................................................................................................... 6
3.1. In the box .......................................................................................................... 6
3.2. Front panel layout ............................................................................................. 7
3.3. Rear panel layout ............................................................................................. 8
3.4. Remote Control ................................................................................................ 9
3.5. Initial setup steps ............................................................................................ 10
3.6. App download ................................................................................................. 10
4. Wi-Fi mode ........................................................................................................ 11
4.1. Wi-Fi mode setup ........................................................................................... 11
4.2. Wi-Fi mode – Alternative setups ..................................................................... 15
4.3. Playing music via My Music and Internet Radio Services .............................. 19
4.4. Solo, Group and Stereo modes ...................................................................... 23
4.5. Using the pre-set functions ............................................................................. 24
5. Bluetooth mode ................................................................................................ 26
6. Line In mode ..................................................................................................... 27
7. Optical mode ..................................................................................................... 27
8. Phono mode ...................................................................................................... 28
9. Connecting a subwoofer .................................................................................. 28
10. Additional Information ..................................................................................... 29
10.1. Software updates: ......................................................................................... 29
10.2. Factory reset: ................................................................................................ 29
11. Troubleshooting ............................................................................................... 30
12. Specifications ................................................................................................... 31
1. Safety Information
Do not share the power socket with another appliance
Do not disassemble or attempt to repair the appliance on your
own.
If you are not using the appliance, pull the power cord out of the
mains socket.
Be careful of the power cord and maintain it as appropriate. To
ensure safety, do not twist the power cord, do not pull it out of the
socket, do not compress it or stretch its length.
Do not use the appliance if the supply voltage is lower than 90V
or higher than 240V. If the supply voltage is lower than 90V, the
appliance may not work, and its lifetime may be affected. If the
voltage is higher than 240V, the appliance may catch on fire or
cause a fire.
Do not wash the appliance or use it in the bathroom, or it may
cause potential injuries and other problems.
1.1. Installation location
Leave sufficient space around the appliance of at least 5 cm from any wall/obstacle to
ensure proper ventilation and prevent the appliance from overheating.
The following places are not suitable installation locations for the appliance:
§ An unstable location
§ A location near a heat source or in direct sunlight.
§ In a wet or dusty environment
1.2. Warning
To prevent suffering an electrical shock or another accident, do not operate the
appliance in a rainy or humid environment.
1.3. Cleaning and maintenance
Use a soft cloth or cotton dipped in a neutral solution for cleaning the surface of
appliances. Do not use the type of cloth that you use for washing dishes or aggressive
chemical agents.
1.4. Before moving the appliance
Before moving the appliance to a different location, please take the disc out of the
appliance so that the disc and appliance will not be damaged.
1.5. Storm
If the appliance is not working properly during a storm, please disconnect the plug
from the power socket and reinsert it after a minute.
1.6. Do not drop small items or a liquid into the appliance
In the event that you find small items or a liquid inside the appliance, you see smoke
or smell an odour, immediately disconnect the appliance from the power grid. Send
the appliance to an authorised service centre.
1.7. Repacking the appliance
When sending the appliance by a transport company, use the original packaging to
prevent its damage during transport.
1.8. Batteries
When installing the batteries into your remote control, ensure
they are inserted correctly according to the diagram. Plus with
plus and minus with minus.
2. Introduction
Thank you for purchasing the TIBO SIA75. We hope that your experience with the
SIA75 will be enjoyable for many years to come.
A fully featured streaming amplifier, the TIBO SIA75 is a flexible performer. With a
choice of streaming via Bluetooth or Wi-Fi plus the addition of 2 x RCA, 1 x Optical
and 1 x Phono inputs plus 1 x sub output, the TIBO SIA75 truly can play it all.
Connect your phone via Bluetooth and enjoy your stored music or streaming
services such as Spotify. Connect to your home network by Wi-Fi or Ethernet and
you open up a huge range of music options. Thousands of Internet radio stations
from around the world are available and all easy to access via the TIBO app, which
can be programmed into the 18 pre-sets. With a power output of 2 x 75W RMS per
channel making the SIA75 one of the most powerful amps in the market.
The Spotify software is subject to third party licenses found here:
https://developer.spotify.com/legal/third-party-licenses/
3.2. Front panel layout
1. IR Remote Control Sensor
2. Direct Pre-sets 1-18: Press 10+ button to access pre-sets 10-18
3. Bass, Treble and Balance adjustment
4. Central Dial:
Long press: Turn on/Standby
Short press: Choose between each mode
Turn Dial Left / Right: For volume control
5. Group Button: Press to group SIA75 with other TIBO Smart Audio products
3.3. Rear panel layout
1. WPS Button: Press to connect to Wi-Fi
2. Ethernet/LAN Port: For connecting directly to a router
3. RCA Line In 1: Left / Right. For phone / tablet
4. RCA Line In 2: Left / Right. For phone / tablet
5. Phono In: Left / Right. For connecting a turntable
6. Sub Out: For connecting a subwoofer
7. Optical In: For connecting CD player / TV
8. Left / Right speaker out binding posts: For connecting speakers
11. Power Button: On / Off
3.4. Remote Control
3. Info Button (N/A for this model)
4. Mode Button: Switch between
Bluetooth, Wi-Fi, Optical, Phono, Line 1
and Line 2 mode
5. Light Button: Change the colour of the
outer ring surrounding the central dial
6. 10+ Button:
Press once to access pre-set 10
Press once followed by 1-8 to access
pre-sets 11-18
7. Pre-set Buttons 1-9:
Recall direct pre-sets
9. Skip Track Forward / Backward
11. Select Button (N/A for this model)
12. Scan Button (N/A for this model)
13. Shift Button: Press to access Bass,
Treble and Balance settings
Then press Skip Track Forwards /
Backwards to increase or decrease
14. Group Button: Press to group to other
TIBO Smart Audio products