Tibo Bond 2 User Manual
!
!
Bond 2 – User Guide
!
!
Contents
• Safety Information
• Introduction
• First time system setup
• Wi-Fi mode
• DLNA setup
• Solo mode and group mode
• Using the pre-set functions
• Bluetooth mode
• Line In mode
• Additional Information
• Troubleshooting
• Specifications
!
!
• Safety Information
Do not share the power socket with another
appliance.
Do not disassemble or attempt to repair the
appliance on your own.
lf you are not using the appliance, pull the power
cord out of the mains socket.
Be careful of the power cord and maintain it as
appropriate.
To ensure safety, do not twist the power cord, do
not pull it out of the socket, do not compress it or
stretch its length.
Do not use the appliance if the supply voltage is
lower than 90V or higher than 240V.
If the supply voltage is lower than 90V, the
appliance may not work and its lifetime may be
affected. lf the voltage is higher than 240V, the
appliance may catch on fire or cause a fire.
!
!
Do not wash the appliance or use it in the
bathroom, or it may cause potential injuries and
other problems.
Installation location
Leave sufficient space around the appliance of at
least 5 cm from any wall/obstacle to ensure proper
ventilation and prevent the appliance from
overheating.
The following places are not suitable installation
locations for the appliance:
• An unstable location
• A location near a heat source or in direct
sunlight.
• In a wet or dusty environment
Warning
To prevent suffering an electrical shock or another
accident, do not operate the appliance in a rainy or
humid environment.
Cleaning and maintenance
Use a soft cloth or cotton dipped in a neutral
solution for cleaning the surface of appliances. Do
not use the type of cloth that you use for washing
dishes or aggressive chemical agents.
!
!
Before moving the appliance
Before moving the appliance to a different location,
please take the disc out of the appliance so that the
disc and appliance will not be damaged.
Storm
lf the appliance is not working properly during a
storm, please disconnect the plug from the power
socket and reinsert it after a minute.
Do not drop small items or a liquid into the
appliance
In the event that you find small items or a liquid
inside the appliance, you see smoke or smell an
odour, immediately disconnect the appliance from
the power grid. Send the appliance to an authorised
service centre.
Repacking the appliance
When sending the appliance by a transport
company, use the original packaging to prevent its
damage during transport.
!
!
• Introduction
Thank you for purchasing the TIBO Bond 2 unit. We
hope that your experience with the Bond 2 will be
enjoyable for many years to come.
The Bond range is a family of wireless receivers
that can make your existing Hi-Fi capable of playing
wireless streaming music in high resolution. Simply
connect the Bond 2 to your Wi-Fi network,
download the free TIBO app for your smartphone or
tablet and you’re good to start streaming music.
The only connection required between the Bond 2
and your Hi-Fi is a simple 3.5mm to 3.5mm lead or
3.5mm to RCA phono interconnect. You can also
stream via Bluetooth.
The Bond 2 is also compatible with TIBO’s multiroom, multi-play system. Add other compatible
TIBO products, such as Vogue, Sphere and Choros
models and you can soon build up a
comprehensive multi-room system around your
home.
The Spotify software is subject to third party
licenses found here:
https://developer.spotify.com/legal/third-partylicenses/
!
!
• First time speaker setup
In the box
- Bond 2 unit
- USB power cable (Note – Charge port is
compatible with Android devices.)
- 3.5mm to 3.5mm jack cable
- Quick start guide
Top panel layout
1. Mode Button: Press to scroll between WiFi,
Bluetooth and Line In mode
2. Pair Button: Press to make the Bond 2
search for Bluetooth devices in Bluetooth
mode
3. Pre-set and Power Button: (Short press –
Scroll between selected pre-sets)
(Long Press – Power on/off)
4. Volume Down
5. Volume Up
!
!
Rear panel layout
1. LAN Connection: Connect directly to a router
2. DIN L/R: Connect with a Bang & Olufsen
product
3. Line Out: 3.5mm audio stereo output
4. Line In: 3.5mm audio stereo input
5. WPS button
6. Micro USB Power Input
Loading...