How it Works
Tibo
Loading...
Bond 2
User Manual
31 pgs4.99 Mb0
User Manual
26 pgs4.34 Mb0
User Manual
12 pgs1.62 Mb0

Tibo Bond 2 User Manual

Bond 2
User Manual
User Manual
Page 1 / 30
Contents
1. Safety Information ........................................................................................................................... 2
1.1. Installation location ...................................................................................................................... 3
1.2. Warning ....................................................................................................................................... 3
1.3. Cleaning and maintenance ......................................................................................................... 3
1.4. Before moving the appliance ....................................................................................................... 3
1.5. Storm ........................................................................................................................................... 3
1.6. Do not drop small items or a liquid into the appliance ................................................................. 3
1.7. Repacking the appliance ............................................................................................................. 3
2. Introduction ...................................................................................................................................... 4
3. First time system setup ................................................................................................................... 5
3.1. In the box .................................................................................................................................... 5
3.2. Top panel layout .......................................................................................................................... 6
3.3. Rear panel layout ........................................................................................................................ 7
3.4. Initial setup steps ........................................................................................................................ 8
3.5. App download ............................................................................................................................. 8
4. Wi-Fi mode ....................................................................................................................................... 9
4.1. Wi-Fi mode setup ........................................................................................................................ 9
4.2. Wi-Fi mode – Alternative setups ............................................................................................... 14
4.3. DLNA (Digital Living Network Alliance) setup ........................................................................... 18
4.4. Playing music via My Music and Internet Radio Services ......................................................... 19
4.5. Solo, Group and Stereo modes ................................................................................................. 23
4.6. Using the pre-set functions ....................................................................................................... 24
5. Bluetooth mode ............................................................................................................................. 26
5.1. Bluetooth mode setup ............................................................................................................... 26
6. Line In mode ................................................................................................................................... 27
6.1. Line in mode setup .................................................................................................................... 27
7. Additional Information .................................................................................................................. 28
7.1. Software updates: ..................................................................................................................... 28
7.2. Factory reset: ............................................................................................................................ 28
7.3. Ethernet Connection: ................................................................................................................ 28
7.4. Wi-Fi Protection Password: ....................................................................................................... 28
8. Troubleshooting ............................................................................................................................ 29
9. Specifications ................................................................................................................................ 30
User Manual
Page 2 / 30
1. Safety Information
Do not share the power socket with another appliance
Do not disassemble or attempt to repair the appliance on your own.
If you are not using the appliance, pull the power cord out of the mains socket.
Be careful of the power cord and maintain it as appropriate. To ensure safety, do not twist the power cord, do not pull it out of the socket, do not compress it or stretch its length.
Do not use the appliance if the supply voltage is lower than 90V or higher than 240V. If the supply voltage is lower than 90V, the appliance may not work, and its lifetime may be affected. If the voltage is higher than 240V, the appliance may catch on fire or cause a fire.
Do not wash the appliance or use it in the bathroom, or it may cause potential injuries and other problems.
User Manual
Page 3 / 30
1.1. Installation location
Leave sufficient space around the appliance of at least 5 cm from any wall/obstacle to ensure proper ventilation and prevent the appliance from overheating.
The following places are not suitable installation locations for the appliance:
• An unstable location
• A location near a heat source or in direct sunlight.
• In a wet or dusty environment
1.2. Warning
To prevent suffering an electrical shock or another accident, do not operate the appliance in a rainy or humid environment.
1.3. Cleaning and maintenance
Use a soft cloth or cotton dipped in a neutral solution for cleaning the surface of appliances. Do not use the type of cloth that you use for washing dishes or aggressive chemical agents.
1.4. Before moving the appliance
Before moving the appliance to a different location, please take the disc out of the appliance so that the disc and appliance will not be damaged.
1.5. Storm
If the appliance is not working properly during a storm, please disconnect the plug from the power socket and reinsert it after a minute.
1.6. Do not drop small items or a liquid into the appliance
In the event that you find small items or a liquid inside the appliance, you see smoke or smell an odour, immediately disconnect the appliance from the power grid. Send the appliance to an authorised service centre.
1.7. Repacking the appliance
When sending the appliance by a transport company, use the original packaging to prevent its damage during transport.
User Manual
Page 4 / 30
2. Introduction
Thank you for purchasing the TIBO Bond 2 unit. We hope that your experience with the Bond 2 will be enjoyable for many years to come.
The Bond range is a family of wireless receivers that can make your existing Hi-Fi capable of playing wireless streaming music in high resolution. Simply connect the Bond 2 to your Wi-Fi network, download the free TIBO app for your smartphone or tablet and you’re good to start streaming music. The only connection required between the Bond 2 and your Hi-Fi is a simple 3.5mm to 3.5mm lead or
3.5mm to RCA phono interconnect. You can also stream via Bluetooth.
The Bond 2 is also compatible with TIBO’s multi-room, multi-play system. Add other compatible TIBO products, such as Vogue, Sphere and Choros models and you can soon build up a comprehensive multi-room system around your home.
The Spotify software is subject to third party licenses found here:
https://developer.spotify.com/legal/third-party-licenses/
User Manual
Page 5 / 30
3. First time system setup
3.1. In the box
• Bond 2 unit
• USB power cable (Note – Charge port is compatible with Android devices.)
• 3.5mm to 3.5mm jack cable
• Quick start guide
User Manual
Page 6 / 30
3.2. Top panel layout
1. Mode Button: Press to scroll between Wi-Fi, Bluetooth and Line In mode
2. Pair Button: Press to make the Bond 2 search for Bluetooth devices in Bluetooth mode
3. Pre-set and Power Button:
Short press – Scroll between selected pre-sets
Long Press – Power on/off
4. Volume down
5. Volume up
User Manual
Page 7 / 30
3.3. Rear panel layout
1. LAN Connection: Connect directly to a router
2. DIN L/R: Connect with a Bang & Olufsen product
3. Line Out: 3.5mm audio stereo output
4. Line In: 3.5mm audio stereo input
5. WPS button
6. Micro USB Power Input
User Manual
Page 8 / 30
3.4. Initial setup steps
• Locate the 3.5mm to 3.5mm jack cable and insert one end into the Line Out port of the
Bond 2. Then insert the other end into the 3.5mm Line In port or headphone port on an amplifier/speaker.
• Locate the Micro USB power cable and insert the small end into the power input on the
rear panel.
• Then insert the large USB end of the cable into a plug that contains a USB port and plug
into a socket.
• Turn on the power switch at the socket and you should hear “Power on – Wi-Fi mode” if
the Bond 2 is connected properly to your amp/speakers.
Note: Some amplifiers and speakers won’t have a 3.5mm jack port or headphone port. Therefore, you will need to purchase a 3.5mm to RCA cable if this is the case.
Google Play Store
App Store
Android
IOS
3.5. App download
The TIBO app helps you get setup for the first time and helps get the most out of your speaker’s functions. The app is compatible with iOS and Android smartphones and can be downloaded for free on Google Play or in the App Store. Type “TIBO” into the search bar or scan the QR the appropriate codes below:
Scan QR code:
With the TIBO app you can:
• Browse and connect to over 15000 internet radio stations
• Select a sound source
• Manage Multi Mode groups
• Set up, modify, and play your pre-sets
• Check what song or other media is currently playing
• Adjust individual and multi-room volume settings
• Rename your speaker
• Adjust panning
User Manual
Page 9 / 30
4. Wi-Fi mode
• With the Bond 2 turned on, press the mode
button until Wi-Fi mode is activated. A red light will start flashing and the Bond 2 will respond saying “Wi-Fi mode.”
• Open the TIBO app on your Android or iOS device and follow the instructions on screen.
• Once opened, if your TIBO app has no
devices connected to it, the screen should look like this.
• Click on “Wi-Fi Setup Wizard” at the bottom
of the page.
4.1. Wi-Fi mode setup
Loading...
+ 21 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use