How it Works
Tibet System
Loading...
CD08
User Manual
122 pgs17.71 Mb0

Tibet System T04, TS04, CS04, CS08, CD08 User Manual

...
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
1
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
2
TABLE OF CONTENTS
1.1 Product Specification------------------------------------------------------------4
Chapter 2. Software Installation --------------------------------------------------- 5
2.1 Automatic Installation------------------------------------------------------- 6
2.1.1 Definition------------------------------------------------------------- 6
2.1.2 Installation Method Selection---------------------------------------------- 6
2.1.3 Installing Drivers------------------------------------------------------- 6
2.1.4 DVR File System Installation----------------------------------------------- 7
2.1.5 Completion & Retry----------------------------------------------------- 8
2.2 Manual Installation--------------------------------------------------------- 9
2.2.1 Definition ----------------------------------------------------------- 9
2.2.2 Software Selection------------------------------------------------------ 9
2.3 Remote Client Installation---------------------------------------------------- 10
2.3.1 Using Magic Radar S/W ------------------------------------------------- 10
2.3.2 Using Web Browser -------------------------------------------------- 11
2.4 Uninstallation------------------------------------------------------------- 14
2.5 Program Execution -------------------------------------------------------- 15
Chapter 3. Main System Application (Control)----------------------------- ------------ 16
3.1 Startup Screen------------------------------------------------------------ 16
3.2 Login------------------------------------------------------------------- 16
3.3 Exit/Logout---------------------------------------------------------------17
3.4 System information ------------------------------------------------------------ 17
3.4 Control Screen------------------------------------------------------------ 18
3.6 Setup------------------------------------------------------------------- 19
3.6.1 System --------------------------------------------------------------19
3.6.1.1 DVR Information---------------------------------------------------19
3.6.1.2 System Time Setup--------------------------------------------20
3.6.1.3 System Power Management--------------------------------------------21
3.6.1.4 Auto Switching Interval-------------------------------------------------21
3.6.1.5 E-map------------------------------------------------------------ 21
3.6.1.6 TV-out-------------------------------------------------------------23
3.6.1.7 On-screen Display----------------------------------------------------24
3.6.1.8 Text Inserter--------------------------------------------------------- 26
3.6.1.9 Hard Disk Usage------------------------------------------------------ 26
3.6.1.10I-phone ------------------------------------------------------------ 26
3.6.1.11 Maintenance Log ---------------------------------------------------------27
3.6.2 Device--------------------------------------------------------- 27
3.5.2.1 Camera[Motion/Object Detection/People Counting/Mosaic/Data retain/PTZ/Access Control]----- 28
3.6.2.2 Output Device -------------------------------------------------------- 40
3.6.2.3 Input Device---------------------------------------------------------- 41
3.6.2.4 Audio --------------------------------------------------------------- 42
3.6.2.5 Alert---------------------------------------------------------------- 43
3.6.3 Event------------------------------------------------------------------ 44
3.6.3.1 Input--------------------------------------------------------------- 44
3.6.3.2 Motion Detection------------------------------------------------------- 45
3.6.3.3 No Video Signal-------------------------------------------------------- 46
3.6.4 Schedule --------------------------------------------------------------- 46
3.6.4.1 Camera [Manual Recording]- --------------------------------------------- 47
3.6.4.2 Input---------------------------------------------------------------- 48
3.6.4.3 Schedule--------------------------------------------------------------48
3.6.5 Network---------------------------------------------------------------- 49
3.6.5.1 DVR Server----------------------------------------------------------- 49
3.6.5.2 Web Server----------------------------------------------------------- 50
3.6.5.3 Central Station-------------------------------------------------------- 50
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
3
3.6.5.4 E-mail ------------------------------------------------------------- 51
3.6.5.5 Dial Alarm----------------------------------------------------------- 52
3.6.5.6 IP Address Setup----------------------------------------------------- 52
3.6.6 User----------------------------------------------------------------- 53
Chapter 4 View Log Application (Status)----------------------------------------------- 54
4.1 Screen Features------------------------------------------------------------ 55
4.1.1 Event Log-------------------------------------------------------------- 55
Chapter 5 Playback Application (Search)---------------------------------------------- 56
5.1 Search Features 1 ---------------------------------------------------------- 56
5.2 Search Features 2 ---------------------------------------------------------- 56
5.2.1 Playback-------------------------------------------------------------- 56
5.2.2 Event/Object/Text/People Count Search ------------------------------------ 57
5.2.3 Monitoring & Searching --------------------------------------------------- 61
5.2.4 Bookmark & Go To------------------------------------------------------ 62
5.2.5 Save ----------------------------------------------------------------- 62
5.2.6 Print ----------------------------------------------------------------- 65
5.2.7 Backup--------------------------------------------------------------- 66
5.2.7.1 DFS Backup------------------------------------------------------66
5.2.7.2 EXE Backup------------------------------------------------------69
5.2.7.3 Run CD Burner(For Non WindowsXP Users)-------------------71
5.2.7.4 Run CD Burner(For WindowsXP Users Only)------------------75
5.2.7.5 Playback-------------------------------------------------------------------75
Chapter 6 Remote Monitoring System (Client)------------------------------------------- 80
6.1 Program Execution-------------------------------------------------------------------80
6.2 Remote Save and Backup-------------------------------------------------------------------82
6.3 Real Time Audio-----------------------------------------------------------------------------83
Appendix 1 POS DVR-------------------------------------------------------------- 84
1.1Hardware Installation------------------------------------------------------- 85
1.1.1 Parts -------------------------------------------------------------- 85
1.1.2 Installation ---------------------------------------------------------- 88
1.2 Software Installation ------------------------------------------------------88
1.2.1 Installation & Setup---------------------------------------------------- 88
Appendix 2 I-phone ------------------------------------------------------------91
2.1 Installation --------------------------------------------------------------92
2.2 Execution ---------------------------------------------------------------93
2.3 Audio Setup -------------------------------------------------------------94 Appendix 3 MDVR ------------------------------------------------------96
3.1 Installation --------------------------------------------------------------97
3.1.1 Start ---------------------------------------------------------------97
3.1.2 Selection of Installation Method --------------------------------------------97
3.1.3 On Installing -----------------------------------------------------------98
3.1.4 Finish ----------------------------------------------------------------98
3.2 Overveiw ----------------------------------------------------------------99
3.3 Execution ----------------------------------------------------------------100
3.3.1 Properties----------------------------------------------------------100
3.3.2 Log in & Log out ------------------------------------------------102
3.3.3 Set up ------------------------------------------------------------103
3.4 E-map ----------------------------------------------------------------------104
3.5 Event ----------------------------------------------------------------------105
3.6 Search ----------------------------------------------------------------------106
3.6.1 Save --------------------------------------------------------------------107
3.6.2 Back up -------------------------------------------------------------108 Appendix 4 Access Control DVR-----------------------------------------110 41 Configuration ----------------------------------------------------------111
3.1.1 Start ---------------------------------------------------------------97
3.1.2 Selection of Installation Method -------------------------------
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
4
CHAPTER 1
HARDWARE Specification
1.1 Product Specification
Models
T04 / TS04 / CS04 / CS08 / CD08 / CS16 / CD16 / LS16 / LD16
Displaying Speed 30fps(NTSC), 25fps(PAL)/ 60, 50/120, 100/120, 100/240, 200/120, 100/240, 200/480, 400/480, 400
Recording Speed 30fps(NTSC), 25fps(PAL)/60, 50/120, 100/120, 100/240, 200/120, 100/240, 200/120, 100/240, 200
Video Inputs 4 / 4 / 4 / 8 / 8 / 16 / 16 / 16 / 16
Audio Inputs 1 / 2 / 4 / 4 / 8 / 4 / 8 / 4 / 8
Sensor Inputs 4 / 4 / 4 / 16 / 16 / 16 / 16 / 16 / 16
Alarm Outputs 2 / 2 / 4 / 8 / 8 / 8 / 8 / 8 / 8
Video Resolution 640 X 480 , 640 X 240 , 320 X 240 (NTSC) / 768 X 576 , 768 X 288 , 384 X 288 (PAL)
Compression Type
MPEG-4
Supported
Signal Types
Supported Network
TCP/IP, PSTN
Supported
Backup Devices
HDD, DVD/R, CD/RW, Network Driver, etc.
Supported
PTZ Protocols
C&B Tech-CND100200&SMART, Changzhou Minking-Minking, CTNCom-HD0670, Dong Yang Unitech-DSC230, DRAGON-DRAGON, Dynacolor-TPD7720, Geosan-GRX1000, GOLDENEYE-GOLDENEYE, InterM-VRX2201, KALATEL-KTD312, KJK-KJK, LG-LPTA100L, PELCO D&P, SAMSUNG-SCC641&SDZ160R&SPD1600&SPX1000&SPT1000, SONY-EVID3031, Vicon-Survey&2000, ZITEC-ZITECH, etc.
Operating Systems
Windows XP, Windows 2000, Linux
Supported
Languages
English, Spanish, Japanese, French, Traditional Chinese, Simplified Chinese, Portuguese, Hebrew, Polish, German, Finnish, Greek, Hungarian, Korean, etc.
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
5
Steps: 1. Insert MagicRadar S/W. 2. Double-click “MagicRadar.English(4.2.0.0)”.
CHAPTER 2
SOFTWARE INSTALLATION
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
6
2.1.3 Installing Drivers
2.1 Automatic Installation
2.1.2 Installation Method Selection
2.1.1 Definition: It is a method to install all the relevant softwares automatically. Select “Automatic Installation” at all times unless only “MagicRadar Client” is to be installed.
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
7
Initialization process will be performed automatically. Click “Close” upon completion.
Selecting “Quick Initialization” will lead to the initialization of entire disk capacity added. Otherwise, put in desirable number to initialize. Note that the number can not exceed total capacity added.
2.1.4 DVR File System Installation
* Definition: Occupying disk capacity to record data * Steps: 1. Select drives from “Available Disk Drive Capacity”
2. Click “Add”.
3. Click “Initialization”. * Caution: 1. Be very careful not to add “C Drive”, for it is used for O/S and DVR softwares.
2. HDD has to be initialized to record data
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
8
Retry the entire procedure if an error message is displayed.
2.1.5 Completion & Retry
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
9
Note:
The rest of the procedures are the same as “Automatic Installation”.
2.2.2 Installation Method Selection
2.2.2 Software Selection
2.2.1 Definition:
It is a method to install selected softwares manually.
Select “Manual Installation” only in the case of “MagicRadar Client” installation.
2.2 Manual Installation
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
10
Select “MagicRadar DVR Client” only.
2.3.1 Using MagicRadar S/W
2.3 Remote Client Installation
Double-click “magicradar(4.1.0.0).exe”.
Select “Manual Installation”.
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
11
2. Log in first before downloading Remote Client Program.
1. Type in the IP address of DVR server.
2.3.2 Using Web Browser
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
12
3. Click the “Install Remote Client” button for downloading.
4. Downloading in progress
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
13
6. Select “Manual Installation.
5. Click “Next” to proceed.
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
14
2.4 Uninstallation
7. Click “Next” to finish installation process.
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
15
Find the icons on the desktop to execute “MagicRadar DVR” and “MagicRadar DVR Client”. Or find “MagicRadar DVR” under “All Programs”.
2.5 Program Execution
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
16
3.1 Startup Screen
3.2 Login
The above screen will appear as MagicRadar DVR system starts.
The default values for User and Password are “admin” and “no password”. Click “OK” to execute MagicRadar DVR system. To give “admin” a password and to create new users, certain configurations are required (Setup/User). Only “admin” and users with appropriate authorization have access to the Setup menu. Note: Vertual keypad is available wherever typing is required.
CHAPTER 3
Main System Application (Control)
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
17
3.3 Exit/Logout
3.4 System Information
To end MagicRadar DVR system, select “Exit” and type in password.
Click on System Information to see DVR system information, such as OS version, CPU, RAM , HDD, IP address, DVR model and DVR software.
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
18
3.5 Control Screen
-
-
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
19
Create a DVR name and put in admin. info. They will be displayed on outgoing e-mails.
3.6.1.1 DVR Information
3.6 Setup
3.6.1 System
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
20
3.6.1.2 System Time Setup
By clicking System Time Setup, users can set Date and Time in DVR software.
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
21
Click on the “E-map” button to design E-map. Click on “Open Map Image”to select an E-map image.
3.6.1.5 E-map
A
uto-switching Interval is a function that allows green square around selected camera to move to the next one at the interval set. e.g.) Camera 1 -> 10 sec. -> Camera 2 ->10 sec. -> Camera 3….
3.6.1.4 Auto-switching Interval
*
Cycle Setting : Select a day that DVR system reboots automatically by the period.
* Reserved time: Time set to shut down or to reboot compute
r
* Disable: selected when System Power Management is not to be used * Shutdown: selected when shutting down computer is required at the time set * Reboot: selected when rebooting compute r is requ ired a t the time set * Exit & Turn off Computer: By check ing the box , computer will be turned off automatically as a user exits from MagicRadar DVR s
y
stem.
3.6.1.3 System Power Management
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
22
The above is a designed E-map sample. Drag mouse to position Camera/Input/Output and design E-map.
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
23
TV-OUT is a function that sends selected cameras to a call monitor (external analog monitor). Click on the “TV-OUT” button for setup.
3.6.1.6 TV-OUT
Click on the E-map button positioned next to the I-phone button to open E-map. White Camera: Not on Recording, Yellow Camera: On Recording, White Input/White Output: Not Activated, Yellow Input/Yellow Output: Activated
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
24
On a camera screen, you may click one right mouse to control OSD as bellows. * Show Camera Names and Status: By checking it, camera names and status will be displayed on camera
pictures.
* Show Motion Detection Blocks: By checking it, green motion detection blocks will be displayed on camera
pictures when recording schedule is set as “M” (Setup/Schedule).
* Show Object Detection Blocks: By checking it, blue object detection blocks will be displayed on camera
pictures.
3.6.1.7 On-screen Display
* The models such as CD (240FPS/240FPS) and LS(480FPS/120FPS) support 2 TV-OUTs. LD16 (480FPS/240FPS) support 3 TV-OUTs and the rest of the models support 1. * Setup Options:
1. Same as Server Screen Mode ( For LS (480FPS/120FPS) only) - TV-OUT Monitor displays what’s on DVR server. Manual Channel Selection - Channels are selected manually. Once “Manual Channel Selection” is selected, channels can also be selected manually on Control screen by placing mouse on camera picture and clicking the right mouse.
2. Auto Channel Switching - Selected channels
rotate to display at the switching interval set.
* Switching Interval: The length of time to stay at one camera
The Number of TV-out Supported
T04 T08 T12 T16 1 2 3 4 CS04 CS08 CS16 CD16 1 1 1 2 CD08 LS16 LD16 2 2 3
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
25
Note : One right mouse click can be a very useful tool. Manual TV-out and OSD setup can be done. Additionally, instant recording can start by one click.
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
26
* Port No.: The port number for I-Phone use has to be set up. Normally the default value is good to use. * Timeout: It indicates the maximum length of connection trial. If there is no response within the value set, call will be cancelled.
I-Phone is “Two-Way Audio
Communication
”. Check the box, go to Control Screen, and click on the I-Phone button for audio communication. For more detailed I-Phone setup, refer to Appendix 2.
3.6.1.10 I-Phone
Hard Disk Usage is to select data storage method. If “Once” is selected, data will be stored up to the point where HDD reaches its maximum capacity. If “Recycle” is selected, data will be overwritten from the point HDD reaches its maximum capacity based on “First In First Out”.
3.6.1.9 Hard Disk Usage
Text Inserter is a function that allows MagicRadar DVR system to integrate with POS machines. Simply install “text_inserter_plugin_for_pos” on DVR Server, and transactions that occur will be displayed on selected camera pictures. Transaction recording and text search are possible as well. For more detailed installation and information, refer to Appendix 1.
3.6.1.8 Text Inserte
r
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
27
Device sub-screen is divided into 5 different setup categories; Camera, Output, Input, Audio and Alert.
A
ll devices in each category can be set up on one same page.
3.6.2 Device
It is used to record and view maintenance history.
3.6.1.11 Maintenance Log
Modify Framerate itself :By ticking it, DVR software will automatically allocate prope
r
frames to channels.
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
28
* Video Signal Type: Select either NTSC or PAL. * Auto Channel Scan: It automatically identifies all the active video channels. Make sure to always click and scan after S/W version change. * Default: It sets “Event Recording Frame” and “Recording Frame” as default values.
Different resolutions and recording frame rates can be set up for different cameras.
Cameras will be enabled by checking the boxes.
3.6.2.1 Camera
[Camera]
Select recording picture quality.
Double-click on “Camera”for more individual Camera setup.
Use Still Image : It is a function that captures still image
when Recording schedule mode is set as M or H.
(Caution) Under R mode at Recording schedule, this function stop recording the channel.
* Pre-alarm (max. 10 sec.): Length of time to be recorded before event * Post-alarm (max. 60 sec.): Length of time to be recorded after event
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
29
Zone Setting:
1. Drag mouse on desired place to set motion detection zones.
2. Select “Sensitivity” according to user’s need, and click OK.
3. To clear the zones set, drag mouse again. .
Motion detection is a function that DVR software detects every movements or motions by comparing a frame with the previous frame.
[Motion Detection]
[Object Detection]
It is a function that marks all the changes occurred from the original scene. MagicRadar will detect new & missing objects after a certain period of time (detecting interval).
User’s Manual (4.2.0.0)
Tibet System Co., Ltd.
30
How to Set up:
• Tick the “Object Detection” box and click on “Zone Settings”.
• Drag the mouse to select object detection zone (same as “Motion Detection”).
• Click on the “Set Frame” button to select original (default) image.
• Go to “Detection Interval” and determine when to mark new object after its pause.
• Go to “Setup/Schedule” and select “M”
• Go to the “Control Screen” and find the red-squared “Object Detection” symbol.
• One click on the “View Original Frame” button will display original image set.
• Click it again to reactivate the “Set Frame” button.
Object Detection Blocks
Click the right mouse and select “Clear Object Detection Blocks” to remove all the blocks.
Loading...
+ 92 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use