Tianjin RoamWiFi Technology ROAMWIFI User Manual

Thank•you•for•ROAMWIFI(WCDMA)•wireless•data•terminal•

Description:

As for the function and the appearance of MIFI, please take it in kind prevail. The photo is for
reference only.The detailed information of the product selection, please inquire the operator. This
brochure introduces basic operations of MIFI. As to the operation of management
parametersconfiguration, please consult the managing procedures or search for the help from the
managing website.
MIFI can be used in the relatively enclosed space such as the pocket and the bag. However, if
you use it for along time, MIFI will be hot because it’s hard for it to dissipate the heat in the
enclosed space and the current temperature will rise. And at the same time, MIFI will power off or
cut off the net connection for safety precaution. When this case happened, please put it in the
ventilated area to help to dissipate the heat. And then, you can power it on.

Includes:

Roam WiFi Device, USB2.0 Cable, Instruction Manual ("Three Guarantees” Certification)

Know Your roamwifi MIFI

USB2.0 Cable, Instruction

1, Status Indicator:
Start RoamWiFi, then the butterfly light will flash; if access Internet in normal way, the butterfly
light will be constant on.

2, Long press the power button for 3 second to power it on or off. Wait for about 2 minutes until
status indicator is constant light.

3, External Charge Port
As power bank, it can charge for mobile and other devices.

4, Charging Port

5, Reset Hole/Charge Indicator
Press the reset hole, the device will power off and reset. This hole also can be used as charge
indicator; it will be constant on for the process of charge.

Know about the information of the screen

Start RoamWiFi, then the butterfly light will flash; if access Internet in normal way, the butterfly
light will be constant on.
Capacity Indicator of Color Light: >70% Green Light, >30% Yellow Light, <30% Red Light

Specification Parameters:

Support Networks: HSPA,WCDMA,EDGE,GRPS
Network Speed: 14.4Mbps
Acceptable Frequencies: 850/900/1700（AWS）/1900/1200
Without SIM card, it can provide international roaming services.
Support Protocol: 802.11b/g

Transmit Brand: 2.412~2.462GHZ
Support 5 device for synchronous connect.

3.7V/5200mAh high capacity Li-ion Battery

Go into the internet by WIFI

Description: by default, MIFI have already configured parameters. You can go quickly into
the internet by the following steps. As to how to configure management parameters, please refer to
managing procedures or search for the help information on the managing page.

Step1: turn on the MIFI

Step2: set up WIFI connection or wired connection

Step3: go into the internet

I. Turning on of WIFI

Long press “ power button ” until the screen is bright, and WIFI is on; and then long press it
again until The Butterfly shape light flashes up, WIFI is on.

II. Set up WIFI connection or wired connection

1. Make sure the MiFi’s Wi-Fi function is on.

2. Select Start> Control Panel> Network Connections> Wireless Network Connection

3. Click View available wireless networks display a list of Wi-Fi .

4. Select the wireless network connection with the MiFi's SSID and click Connect. If Wi-Fi is
turned on the security mechanism , you need to enter the correct network key. SSID and network
key printed on the MiFi’s label.

III. Get into the internet

When WIFI is connected with clients, it will get into the internet automatically. ((No need of
smart SIM card)
Logging into the Managing website

1. Make sure the connection between MIFI and computer works well.

2. Open the browser, and enter http://192.168.1.1 in the address box.

3. or by downloading the APP, which can be used to manage Roam Wifi device, change
password and other attributes.

The Usage of Roam WiFi as Mobile Power

1. For charging mobile phones and other electronics

1) Using mobile power for charging through original data cable. Short press the power button to