Thunder X3 TK25 User Manual
TK25
KEYBOARD FEATURES
THUNDERX3 User Manual
REC MACRO KEYS
LOCK KEYBOARD
F11
Press to select a backlight color:
1. Blue 2. Red 3. Purple 4. Off
5.FN+ (Three colors Breathing)
FN+PAGE UP - increase LED brightness
FN+PAGE DOWN - decrease LED brightness
Profiles for different games settings.
M1=Profile 1
M2=Profile 2
M3=Profile 3
REC Macro key
Opens My Computer
Opens default web browser
Opens email
Mute
Increase volume
Reduce volume
FN+F11 lock keyboard
LED switch
FN+” ”open and close Breathing LED
FN+”Q”
Adjusting button retransmission rate,
2 grar default, with speed 1S/60 byte
FN+Page Up: increase brightness,
FN+Page Down: decrease brightness,
backlight with high,middle, low four gears.
WIN / MENU LOCK
Set Macro to each of the five MACRO KEYS:
G1/G2/G3/G4/G5
and use these keys to fast respond to your game play.
REC the Macro key
Support 5 user-defined macros (G1-G5), free of driving manual recording, Each macro recording at most 30 bytes.
Press ”REC” key start recording,LED (CAPS/NUMLOCK/WINLOCK) slowly flash,then press G1 appoint recording
instructions, press effective buttons for recording, with longest recording time 30S. If over, over recording.
Then press “REC” to quit recording. After it, all indication light back to current situation with M1-M3
three modes,that is G1-G5 could support record three different gaming macros.
Clear the REC Macro key
Press FN+”REC for 3S, clear EEPROM macros and backlight seting recording.
3
1/5
4
2
Free of driving manual recording
Function: Recording a Macro
1. Click the “REC”
2. The LED (CAPS/NUMLOCK/WINLOCK)
slowly flash.
3. Pree G1 appoint recording instructions,
press effective buttons for recording,
with longest recording time 30S.
4. Pree any key.
5. Over recording. Then press “REC” to
quit recording.
Chapter One : Interface
Information Window
Displays current
settings on this keyboard
Prole Selection
Save up to 3 proles
ThunderX3 Website
Hyperlink to ofcial
website
Close the software
Reset
Reset proles
Macro
Ok
Cancel
Cancel the current setting
Apply
Conrmation of change
Chapter Two : Button
Record Macro
Pull-down Menu
Import - import profiles
Export - export profiles
About - software info
Close - Close this software
1
Function: Recording a Macro
1. Select from one of the three profiles
2. Click “MACRO”
3. “KEY SETTING” window appears
3
2
4
5/6
4. Name the new Macro
5. Click ”RECORD”to start recording
6. Click “RECORD” again to stop recording
7. Key strokes recorded will appear in this field.
Click “TOP”,“UP”,“DOWN”,“BOTTOM”
to rearrange the key strokes (if necessary).
8. Click “OK” to confirm
9. Cancel this recording
8
7
9
Keys in the blue area are the keys
that can be assigned to:
1. act as another key, or
2. record and execute a Macro, or
3. perform a media function, or
4. execute a command
Reassigned key/s will become orange in color.
1
1. Click on a key to be reassigned
2. “KEY SETTINGS” window appears
with four ways of configurations.
2
1
Configuration 1 - KEY
1. Select a key to be reassigned
2. Select KEY
3. Type in a key of your choice
4. Click “OK”to confirm
2
3
4
1
Configuration 2 - MACRO
1. Select a key to be reassigned
2. Select MACRO
3. Refer to Function: Recording a Macro
4. or choose from other MACRO previously set.
(See example below)
5. Click “OK”to confirm
3
2
4
5
1
Configuration 3 - MEDIA
1. Select a key to be reassigned
2. Select MEDIA
3. Select from a list of actions
(See example below)
4. Click “OK”to confirm
2
3
4
1
Configuration 4 - FUNCTION
1. Select a key to be reassigned
2. Select FUNCTION
3. Select from a list of actions
(See example below)
4. Click “OK”to confirm
2
3
4
Loading...