THUMBS UP MNWIRLESPB User Manual

Wireless Suction Powerbank
PRODUCT PACKAGING
MANUAL STICKER
80gsm
UNCOATED
W 95mm x H 170mm (folded)
MN-WIRLESPB
5060613314647
EAN 13, 80%
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur In a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different fromthat of which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF exposure warning : This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.
Head Office - Thumbs Up (UK) Ltd, Unit L, Braintree Industrial Estate, Ruislip, Middlesex, HA4 0EJ, UK. T: 0845 466 8880. info@thumbsupuk.com. www.thumbsupuk.com.
Germany - Thumbs Up GmBh, Rudolf-Diesel-Str.14, D-53859 Niederkassel. T: +49(0)228 555 236-0. info@thumbsup.de. www.thumbsup.de
USA - Thumbs Up USA, Unit L, Braintree Industrial Estate, Ruislip, Middlesex, HA4 0EJ, UK. T: 0845 466 8880. info@thumbsupusa.com. www.thumbsupusa.com
Wireless SUCTION powerbank
instructions
D
C
F
E
Product Title1.
Sub Title
2.
3.
General Text Helvetica
4.
TU Details Helvetica
5.
Warnings Helvetica
RoladeFree
Din pro
BLACK AND WHITE, DOUBLE SIDED PRINT
FOLDED
Opensize: W 380mm x H 170mm
23/04/2019 CHRISTY CHAN
Brought to you by Thumbs Up. Ruislip, HA4 0EJ, UK
© www.thumbsupuk.com
E&OE images and illustrations may differ from actual product. iPhone® is not included.
iPhone®, iPod® & iPad® are registered trademarks of Apple® Computer Inc. The product is not licensed, designed, sponsored, endorsed or manufactured by Apple® Computer Inc.
Manniska is a trademark of Thumbs Up (UK) Ltd. All rights reserved.
Controls (diagram)
A. USB charging LED power indicator B. Wireless charging LED power indicator light (ON/Connected) C. Wireless charging zone D. Power ON/OFF button E. USB output port F. Type-C input/output
Two charging modes: Wired charging: Smartphone is charged by powerbank through connecting with a USB cable. Wireless charging: Smartphone is charged by placing it into the wireless charging zone of the
powerbank and the powerbank must be connected to adapter via a USB cable. The powerbank can not transmit any wireless signal and energy without connecting to adapter.
Charging Devices by Cable
1. Plug the provided charging cable (or your own compatible cable) into the power bank.
2. The LED power indicators (A) will come on to confirm that your device is charging.
Wireless Charging for Smartphones
1. Switch on the powerbank using the power button (D). The red and green LED power indicator light (B) will flash. Place your QI/wireless charging compatible device on the wireless charging zone (C).
2. The green LED indicator light (B) will start shining green and your phone will start charging to confirm it’s connected.
Charging the Powerbank
• Insert a Type-C cable into the powerbank and connect to a power source.
• The LED indicators (A) will flash on to confirm that the powerbank is charging.
• When the powerbank is fully charged all the LED lights will be on.
Note:
- If the device doesn't charge using the wireless method, make sure it supports wireless charging and adjust the position on the wireless charging zone.
- If the device won’t switch on, try charging it as it might have a low battery.
- Please disconnect your device from the powerbank when it is fully charged.
- All Led indicators will flash when the powerbank is fully charged. Disconnect the powerbank from your charging source when fully charged.
Specifications
Capacity Battery Type USB Output Type-C Input/Output Wireless Charging Output
Recharging Time
Caution
Do not attempt to repair or disassemble the wireless charger. Any signs of wear and tear please discard immediately. Do not use if connections are loose. Do not use your wireless charger in humid, dusty or high temperature environments. Do not place your wireless charger near magnets. Wipe clean with a damp cloth only. Do not use detergents.
5000 mAh
Lithium Polymer
5V/2.4A 5V/2.4A
5W
3 - 4 Hours
MADE IN CHINA | FABRIQUÉ EN CHINE
MN-WIRLESPB
FCC ID: 2AHHEMNWIRLESPB
A
B
Loading...