Thule Parkway 956, Parkway 957, Parkway 958 Instructions Manual
PARKWAY (4 BIKE / 2 BIKE) 956/957/958
PARTS INCLUDED
BA
DC
L
J
pa
rt description
upright/bike arm assembly – 1 –
A
B stinger – 1 –
M10 washer 951-1122-54 2 2
C
D
3/8" lock nut 853-5779 1 1
E 3/8" hex screw 853-5778 1 1
F M12 lock washer 956-1221-59 1 1
G M12 x 40 receiver bolt 908-1240-54 1 1
M12 washer 951-1224-54 1 1
H
I
M8 hex bolt 908-0870-54 1 1
J M8 washer 951-0816-54 2 2
K M8 lock nut 938-0800-54 1 1
L cradle 853-7887 8 4
cradle strap 852-3006-001 8 4
M
N
(4 bike) strap 753-2030-07 1 –
O (2 bike) strap 753-2030-08 – 1
GF
K
H
M
part nu
956 qty. 957 / 958 qty.
mber
E
I
N
O
TOOLS REQUIRED
• Socket wrench with 13mm (1/2"), 14mm (9/16"),
19mm (3/4") sockets and an adjustable wrench (6" or
larger) or 13mm (1/2"), 14mm (9/16"), 19mm (3/4")
wrench and an adjustable wrench (6" or larger)
• No more than 4 bicyc
4 bike model Parkway.
• No more than 2 bicycles should be carried on the 2
bike model Parkway.
• Check tightness of all bolts and knobs periodically.
• Not intended for off-road use.
• Check straps for wear and replace if worn.
• Not intended for tandems or recumbents.
• Your vehicle must be equipped with a 2" or 1 1/4"
receiver hitch.
• Do not install on a trailer or other towed vehicle.
501550902_02
les should be carried on the
1
2
•
A
•
•
stinger into cradle of upper assembly as shown.
Position
Assemble
Tighten firmly with 13mm wrench and adjustable wrench.
M8 hex bolt (I), M8 washers (J) and M8 locking nut (K) as illustrated.
B
Insert
•
safety pin through holes of hitch and upper assembly as illustrated.
501550902_02
Loading...