Thule 2060 User Manual

Thule System Kit 2060

SATURN 4-dr, 96

1

3

x4

305 mm

12

inch

500 mm

195/8 inch

MAX

LOAD

75 K

6,5 Kg

2

g

Before the load carrier can be fitted, tensioning attachments must
first be mounted. The tensioning attachments should always

be left on the vehicle.

1. Open the doors. Remove the plastic cover behind the door.

Unscrew the TORX screw (1 off) using TORX tool 15 and remove
the cover.

2. Unscrew the 6 TORX screws which keep the plastic moulding
in place. Bend the moulding out a bit as shown in the picture.

3. Press the tensioning attachment onto the moulding. The rearmost
attachment must be pressed on and then slid back to the correct
position.

4. Re-fit the moulding and the plastic cover.

4

03

x4

29

x4

90

x4

Hook the brackets into place in
the tensioning attachments.

907L5DF8

/

501-2060

Front

860 mm / 34 inch

mm/inch

Rear

850 mm / 33 1/ 2 inch