Table Top
1 pc
1 pc1 pc
This page lists all the contents included in the box.
Please take the time to identify the hardware as
well as the individual components to this product.
As you unpack and prepare for assembly, place
the contents on a carpeted or padded area to
protect them from damage.
Back Left Leg
Back Right Leg
ASSEMBLY INSTRUCTION
1 pc
Screw
Ø1/8"*38mm
Allen Key
4 mm
2 pcs
Shelf
2 pcs
Front Leg
8 pcs
Allen Bolt
Ø1/4"*45mm
8 pcs
Lock Washer
Ø1/4*11mm
8 pcs
8 pcs
Flat Washer
Ø1/4 x 19 mm
Anti-tipping HW
1 set
OVAL SOFA TABLE TV STAND
Attached two Front Legs(B) and one Back Left Leg(C) to the Table Top(A). Use Bolt(G) Lock
Washer(H) and Flat Washer(I) on holes of Table Top(A). Turn the Allen Key(J) in Bolt(G).
Attached Shelf(E) to the Front Leg(B) and Back Left Leg(C) first,attached the Back Right Leg(D)
to the Table Top(A) and Shelf(E) in last,use Bolt(G) Lock Washer(H) and Flat Washer(I) on holes
of Table Top(A). Turn the Allen Key(J) in Bolt(G).
A
J
I
H
G
J
Use Screw(F) screwing two Front Legs(B),Back Left Leg(C) & Back Right Leg(D) on holes of
Shelf(E).
E
E
A
B
D
Take out the drawer, and remove the handle at back side of drawer. Use bolt install the handle
on front side.
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry
or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all
connections are tight.
Attach Anti-tipping hardware(K) to wall: Attach bracket (vertically) to wall using 2 of the screws
provided; Attach bracket (horizontally) to furniture back (directly below top) with 2 of the screws
provided. Place bracket as close to center of furniture back as possible in relation to wall stud
and the desired position in the room; Move furniture to its final position. Thread the strap
through bracket, pull it tight.
Completed.
Loading...