1PC
2PCS
1
ASSEMBLY INSTRUCTION
2PCS
This page lists all the contents included in
the box.Please take the time to identify the
hardware as well as the individual
components to this products.As you
unpack and prepare for assembly, place
the contents on a carpeted or padded area
to protect them from damage.
TUFTED ACCENT CHAIR
A
CHAIR
FRONT LEG
B
C
BACK LEG
1
Take out the Front Leg (B) and Back Leg (C) from the bottom of the Chair(A).
A
LEG(B&C) INSIDE
2
Put the Front Leg (B) and Back Leg (C) on the bottom and screw them tighten.
A
B
C
3
Tighten all of the bolt. Turn over the chair assembled to a properly position.
Cleaning&Care
2
Helpful Tip:
-Instead of applying
downward
pressure while reaching
under to tighten bolts,
have someone sit in the
chair while you tighten
Take the Allen Wrench,
and turn the bolts until the
legs are secure.
DO NOT TIGHTEN
COMPLETELY.
Stop when you feel you are
adding force to tighten the
bolt.
Stand chair up on an even
surface and check that it is
balanced.
If there is a slight wobble,
apply downward pressure in
the corner where a leg is
uneven. Keeping pressure in
that corner, tighten all bolts.
If balanced, apply downward
pressure evenly in the center
and tighten all bolts.
Do not over-tighten beyond
hole depth.
Treat surface with care.Surface is reslstant to scratches but is not iscratch resistant.
Clean surface with a surfaces dry or damp soft cloth.do not use abrasive
cleaners.Hardware may loasen over time.Periodically check all connections are tight.
Loading...