ASSEMBLY INSTRUCTIONS
ATTENTION：ATTENTION：
1. Please read these instructions carefully before assembly.
2. Aluminum is soft metal over tighten may strip thread or break the part.
3. DO NOT use power tools.
Assembly steps:Assembly steps:
1. Turn the table top(A) upside down on the soft clean surface. Loosely attach the legs(D) to the table
Top using bolts(E), big flat washers(F), lock washers(G) nuts(H)and nut caps(I). Tighten the
Bolts at this time.
2. Loosely attach the center plate(C) to the legs. Note that the recessed end of plate goes on the leg
Last at each corner. Secure using small flat washers(K), small lock washers(L) and bolts(J).
DO NOT tighten the bolts.
3.Tighten all the bolts and nuts completely. DO NOT over tighten the nuts and bolts.
4. Turn the table onto its legs. put the basin (O) and the center tray(B) the table as the picture 3.
Warning : please do not use acid or alkaline washing liquid to clean the product.
D
J
L
K
G
I
H
11
F
E
22
22
C
A
Parts list Parts picture Description
A
B
C
D
Table top
Center tray
Center plate
Table leg
33
Q'ty
1
1
1
3
B
O
Parts list Parts picture Description
E
F
G
H
I
J
K
(M8*30)
(M8)
(M8)
(M8)
(M8)
(M6*30)
(M6)
Bolt
Big flat washer
Big lock washer
Nut
Nut cap
Bolt
Small flat washer
Q'ty
3
3
3
3
3
3
3
O
Basin
L
1
M
(M6)
Small lock washer
Wrench
3
1
Loading...