Thrane&Thrane SAILOR 5133G, SAILOR 5134B, SAILOR 5132C, SAILOR 5133F, SAILOR 5132F Technical Manual

...

TECHNICAL MANUAL

SAILOR SYSTEM 5000 GMDSS CONSOLE

Disclaimer

Any responsibility or liability for loss or damage in connection with the use of this product and the accompanying documentation is disclaimed by Thrane & Thrane. The information in this manual is provided for information purposes only, is subject to change without notice and may contain errors or inaccuracies.

Manuals issued by Thrane & Thrane are periodically revised and updated. Anyone relying on this information should acquire the most current version e.g. from the Thrane & Thrane Extranet at http://extranet.thrane.com.

Thrane & Thrane is not responsible for the content or accuracy of any translations or reproductions, in whole or in part, of this manual from any other source.

0935

Console 5000

0930

CONTENTS

1 General information .......................................................................... 1-1

2 Installation ......................................................................................... 2-1

2.1 Dimensions.......................................................................................... 2-1

2.2 Drilling and cutting template ................................................................ 2-4

2.2.1 Tabletop mounting for 325mm and 400mm section ............................ 2-4

2.2.2 Tabletop mounting for 3 x 400mm section .......................................... 2-4

2.2.3 Bulkhead mounting for 325mm and 400mm section ........................... 2-5

2.2.4 Bulkhead mounting for 3 x 400mm section ......................................... 2-5

2.2.5 Earth stubs mounting .......................................................................... 2-6

2.2.6 Placement of print ............................................................................... 2-6

2.3 Mounting the console onto the bulkhead............................................. 2-7

2.4 Paper roll ............................................................................................. 2-9

2.5 Control units ........................................................................................ 2-9

2.6 Message terminal ................................................................................ 2-10

2.7 Factory configuration of the console ................................................... 2-11

3 Electrical installation ........................................................................ 3-1

3.1 TT-3606E opt. 003 NMEA Adapter for mini-C ..................................... 3-1

3.2 Grounding cables ................................................................................ 3-2

3.3 Console light........................................................................................ 3-3

3.4 Connection board ................................................................................ 3-4

3.5 Schematic connection board ............................................................... 3-5

4 Installation cables ............................................................................. 4-1

4.1 Console wiring system ........................................................................ 4-1

4.2 Internal cables overview ...................................................................... 4-2

4.2.1

Internal cables 2 section console w/ MF/HF Radiotelex, mini-C and VHF .......

4-4

4.2.2

Internal cables 3 section console w/ MF/HF Radiotelex, mini-C and VHF .......

4-5

4.2.3 Internal cables 3 section console w/ MF/HF, 2 x mini-C and VHF ...... 4-6

4.2.4 Internal cables 1 section console w/ MF/HF and VHF......................... 4-7

4.3 Installation external cabling ................................................................. 4-8

4.3.1 External cabling -

Emergency light, Battery Panel and position source ........

4-8

4.3.2 External cabling - Alarm Panel ............................................................ 4-9

4.3.3 External cabling - VHF ........................................................................ 4-9

4.3.4 External cabling - MF/HF ..................................................................... 4-10

4.3.5 External cabling - mini-C and Power supply ........................................ 4-10

1 General information Console 5000

1-1

0815

1 General information

With the System 5000 GMDSS console, all the communication equipment of the ship can be combined in one small, compact console.

One of the main purposes of the console is to make the best possible use of the limited space on board a ship. Furthermore, the fact that all the equipment is kept in the same place makes installation easy and fast. Finally, the modular structure of the system means that it can easily be altered if for example a need to have it extended should arise.

The standard console includes the following: Emergency light, battery panel, and connection board. Furthermore, the console is designed with removable front plates for easy service and maintenance.

The console can be configured to match any maritime communication need. On the following pages, some typical configurations are shown.

1 General information Console 5000

1-2

0815

2 Installation Console 5000

2-1

0929

2 Installation

2.1 Dimensions

Console type numbers and part numbers refer to console hardware only, i.e. an empty console with only battery panel, emergency light and connection board(s) installed.

Equipment illustrated for reference only.

Type: 5135C

Console part no.: 405135C-THRxx

BATTERY ALARM

1 GENCY

EMER-

LIGHT

BATTERY 1

BATTERY 2

2A2AC1

ALARM

MUTE/

1 - 2

BATT

DIM

TEST

1645

405

500

99-127880

2 pcs. CU51x0 MF/HF Control Unit TT-3043CP Console Panel 3 pcs. H1252B Parallel Printer 3 pcs. TT-3606E Message Terminal

Weight:

excl. units 60 kg. incl. units 89 kg.

Type: 5134C

Console part no.: 405134C-THRxx

BATTERY

ALARM

1 GENCY

EMER-

LIGHT

BATTERY 1

BATTERY 2

2A2AC1

ALARM

MUTE/

1 - 2

BATT

DIM

TEST

1245

405

500

375

99-126990

CU51x0 MF/HF Control Unit RT502x VHF Radio TT-3043CP-2 Console Panel 2 pcs. H1252B Parallel Printer 2 pcs. TT-3606E Message Terminal

Weight:

excl. units 45 kg. incl. units 65 kg.

Type: 5134B

Console part no.: 405134B-THRxx

BATTERY ALARM

1 GENCY

EMER-

LIGHT

BATTERY 1

BATTERY 2

2A2AC1

ALARM

MUTE/

1 - 2

BATT

DIM

TEST

1170

405

500

375

99-127178

CU51x0 MF/HF Control Unit TT-3043CP-2 Console Panel 2 pcs. H1252B Parallel Printer 2 pcs. TT-3606E Message Terminal

Weight:

excl. units 45 kg. incl. units 65 kg.

Type: 5134F

Console part no.: 405134F-THRxx

BATTERY ALARM

1 GENCY

EMER-

LIGHT

BATTERY 1

BATTERY 2

2A2AC1

ALARM

MUTE/

1 - 2

BATT

DIM

TEST

1445

405

500

375

99-129806

CU51x0 MF/HF Control Unit RT502x VHF Radio TT-3043CP-2 Console Panel 2 pcs. H1252B Parallel Printer 2 pcs. TT-3606E Message Terminal 1 pcs. TT-3670 IP Handset

Weight:

excl. units 50 kg. incl. units 71 kg.

2 Installation Console 5000

2-2

0930

Type: 5134G

Console part no.: 405134G-THRxx

BATTERY ALARM

1 GENCY

EMER-

LIGHT

BATTERY 1

BATTERY 2

2A2AC1

ALARM

MUTE/

1 - 2

BATT

DIM

TEST

1645

405

500

375

99-129805

CU51x0 MF/HF Control Unit RT502x VHF Radio TT-3043CP-2 Console Panel 2 pcs. H1252B Parallel Printer 2 pcs. TT-3606E Message Terminal

Weight:

excl. units 58 kg. incl. units 78 kg.

Type: 5133C

Console part no.: 405133C-THRxx

BATTERY ALARM

1 GENCY

EMER-

LIGHT

BATTERY 1

BATTERY 2

2A2AC1

ALARM

MUTE/

1 - 2

BATT

DIM

TEST

1245

405

500

375

99-126991

CU51x0 MF/HF Control Unit RT502x VHF Radio TT-3043CP Console Panel 2 pcs. H1252B Parallel Printer 2 pcs. TT-3606E Message Terminal

Weight:

excl. units 45 kg. incl. units 65 kg.

Type: 5133G

Console part no.: 405133G-THRxx

BATTERY

ALARM

1 GENCY

EMER-

LIGHT

BATTERY 1

BATTERY 2

2A2AC1

ALARM

MUTE/

1 - 2

BATT

DIM

TEST

1645

405

500

375

99-129807

CU51x0 MF/HF Control Unit RT502x VHF Radio TT-3043CP Console Panel 2 pcs. H1252B Parallel Printer 2 pcs. TT-3606E Message Terminal

Weight:

excl. units 58 kg. incl. units 78 kg.

Type: 5133F

Console part no.: 405133F-THRxx

BATTERY

ALARM

1 GENCY

EMER-

LIGHT

BATTERY 1

BATTERY 2

2A2AC1

ALARM

MUTE/

1 - 2

BATT

DIM

TEST

1445

405

500

375

99-129808

CU51x0 MF/HF Control Unit RT502x VHF Radio TT-3043CP Console Panel 2 pcs. H1252B Parallel Printer 2 pcs. TT-3606E Message Terminal 1 pcs. TT-3670 IP Handset

Weight:

excl. units 50 kg. incl. units 71 kg.

2 Installation Console 5000

2-3

Type: 5132C

Console part no.: 405132C-THRxx

BATTERY ALARM

1 GENCY

EMER-

LIGHT

BATTERY 1

BATTERY 2

2A2AC1

ALARM

MUTE/

1 - 2

BATT

DIM

TEST

845

405

500

375

99-126992

CU51x0 MF/HF Control Unit RT502x VHF Radio TT-3043CP Console Panel 2 pcs. H1252B Parallel Printer TT-3606E Message Terminal

Weight:

excl. units 30 kg. incl. units 51 kg.

Type: 5132F

Console part no.: 405132F-THRxx

BATTERY

ALARM

1 GENCY

EMER-

LIGHT

BATTERY 1

BATTERY 2

2A2AC1

ALARM

MUTE/

1 - 2

BATT

DIM

TEST

1045

405

500

375

99-129809

CU51x0 MF/HF Control Unit RT502x VHF Radio TT-3043CP Console Panel 2 pcs. H1252B Parallel Printer TT-3606E Message Terminal 1 pcs. TT-3670 IP Handset

Weight:

excl. units 35 kg. incl. units 57 kg.

Type: 5132B

Console part no.: 405132B-THRxx

BATTERY ALARM

1 GENCY

EMER-

LIGHT

BATTERY 1

BATTERY 2

2A2AC1

ALARM

MUTE/

1 - 2

BATT

DIM

TEST

770

405

500

375

99-127179

CU51x0 MF/HF Control Unit TT-3043CP Console Panel 2 pcs. H1252B Parallel Printer TT-3606E Message Terminal

Weight:

excl. units 28 kg. incl. units 45 kg.

Type: 5131A

Console part no.: 405131A-THRxx

BATTERY ALARM

1 GENCY

EMER-

LIGHT

BATTERY 1

BATTERY 2

2A2AC1

ALARM

MUTE/

1 - 2

BATT

DIM

TEST

445

405

375

99-126993

CU51x0 MF/HF Control Unit RT502x VHF Radio

Weight:

excl. units 15 kg. incl. units 23 kg.

0930

2 Installation Console 5000

2-4

2.2 Drilling and cutting template

The console can be placed and mounted, in several different ways, to ensure optimal integration into the user environment.

2.2.1 Tabletop mounting for 325mm and 400mm section

35846A

Cut for cable entry

for 325mm section.

325

375

300

115

4 mounting holes (ø6)

400

4 mounting holes (ø6)

Cut for cable entry

for 400mm section.

NB! The table must be sufficiently supported

to carry the console.

****

Drilling template Drilling template

775

727.5

700

400

372.5

327.5

300

47.5

720

380

320

2.2.2 Tabletop mounting for 3 x 400mm section

99-126894

Cut for cable entry

400

375

300

115

400

4 mounting holes (ø6)

Cut for cable entry

NB! The table must be sufficiently supported

to carry the console.

****

400

4 mounting holes (ø6)

Cut for cable entry

for 400mm section.

Drilling template

4 mounting holes (ø6)

1250

1202.5

1175

875

847.5

802.5

775

475

447.5

402.5

375

47.5

1195

855

795

455

395

0815

2 Installation Console 5000

2-5

2.2.3 Bulkhead mounting for 325mm and 400mm section

Earth stubs entry.

35847B

100 100

405

254

300

for 325mm section.

Drilling template

for 400mm section.

Drilling template

775

700

637.5

400

387.5

350

312.5

300

62.5

400325

2.2.4 Bulkhead mounting for 3 x 400mm section

Earth stubs entry.

99-126895

100 100

405

300

for 400mm section.

Drilling template

Earth stubs entry.

100

261.3

167.3

73.3

254

130.3

400400400

1250

1203

1175

1033

1017

875

847

775

743.5

545.5

475

375

343.5

145.5

* To avoid vibration noise, the console should be fastened with screws onto the bulkhead.

** Space from last left- and righthand section to wall.

(22.5 + spacing = 25mm)

0815

+ 25 hidden pages

Thrane&Thrane SAILOR 5133G, SAILOR 5134B, SAILOR 5132C, SAILOR 5133F, SAILOR 5132F Technical Manual

Specifications and Main Features

Frequently Asked Questions

User Manual