Thorsis Technologies isCAN USB User Manual

isCAN USB

User Manual

isCAN USB

Content

I Certicate of conformity ...................................................................1

1 isCAN USB ..............................................................................................2

2 Installation and commissioning ....................................................3

2.1 Installation of the driver software ..........................................3

2.2 Installation of the Hardware .....................................................4

2.3 Conguration and Commissioning .......................................5

2.3.1 Add a device ............................................................................6

2.3.2 Empty-Slot ................................................................................7

2.3.3 Removal of a device ..............................................................8

2.4 Test Software ..................................................................................8

isCAN USB

I Certicate of conformity

according to EC Directive 2014/30/EU (electromagnetic compatibility) of February 26th, 2014.

We hereby declare, that the device indicated below in its design and construction, is in conformity with the essential
safety and health requirements of the EC Directive 2014/30/EU. Changes or modications not approved by Thorsis
Technologies void the validity of the declaration.

Manufacturer: Thorsis Technologies GmbH
Oststr. 18
39114 Magdeburg
Germany

Product designation:
Device type: isCAN USB
Order number: 11300 - 0201

Standards used:
EN 61326-1:2013

Magdeburg, 2017-06-26 Dipl.-Ing. Thorsten Szczepanski, Managing director

2

isCAN USB

1 isCAN USB

The CAN dongle isCAN USB with the universal USB interface grants a fast ac­cess to any CAN/CANopen based network. The isCAN USB interface standard
type supports the CAN specication 2.0A (11 bit ID) and 2.0B (29 bit ID). It is
connected with a 9 pin D-Sub connector according to the CiA specication DS-

102. LED‘s indicate the actual working condition. The opto-isolated interface
supports a transmission speed of up to 1 MBit/s.

Technical Data
Interface USB
Controller CY7C68014A, Asic SJA1000
Identier length 11/29 Bit
Transmission rate 10 kbit/s – 1 Mbit/s (CAN)
CE-Certicate isCAN USB
Driver software Windows XP, Vista, 7, 8, 10
Delivery content Hardware, Driver-, Conguration- and Testsoftware;
Documentation german and english on CD
Available software isCAN/CANopen Comm DTM,
isCAN/CANopen Server (OPC),
RP1210 interface Dll with J1939 support,
API interface Dll with examples in C/C++ and C# source code