Thorens TD 201 Technische details
Thorens GmbH · Lustheide 85 · 51427 Bergisch Gladbach · Deutschland
www.thorens.com
info@thorens.com
TD 201 Specification
Turntable section
Drive System
Belt Drive
Motor
DC Motor
Speed
33 1/3 RPM, 45 RPM
Rotation Speed Variation
+/–2%
Wow and Flutter
0.2%
Signal-to-Noise Ratio
67dB or higher (A-weighted, 20kHz LPF)
60dB or higher (unweighted, 20kHz LPF)
Platter
Aluminum Die-cast
Diameter of Platter
12", 300mm
Tonearm section
Alumi tube
Type
Static Balance, Straight
Effective Arm Length
8.8", 223.6mm
Stylus Pressure Range
0 to 4g
Supported Cartridge Weight
3.5 to 6.0g
Overhang
18.6mm
Anti-skating Adjustment
Supported
Cartridge section
Type
MM type (Audio-Technica AT3600)
Stylus Construction
Bonded Diamond
Frequency Response
20Hz to 20kHz
Channel Separation
>18dB
Channel Balance
2.5dB
Vertical Tracking Angle
20 degrees
Supported Load Impedance
47k ohms
Output Voltage
2.5mV (1kHz, 3.54cm/sec.)
Stylus Pressure
3.5g +/–0.5g
Cartridge Weight
5g +/–0.5g
Head-shell Weight
10g (including Screws, Nuts and Wires)
Thorens GmbH · Lustheide 85 · 51427 Bergisch Gladbach · Deutschland
www.thorens.com
info@thorens.com
Analog Output
Connector
RCA Pin jack (Gold-plated)
Power
AC 100 to 240V, 50/60Hz
Power Consumption
1.5W (less than 0.5W at Standby)
Overall Dimensions
(W x H x D)
420 x 355x 121mm
Weight
Approx. 3.9 kg
Loading...