Thor TWC2403DI User Manual
1
INSTRUCTION MANUAL
TWC2403DI
2
TABLE OF CONTENTS
Contents Page#
● Wine Cooler Package Contents 3
● Important Safety Instructions 3
Main structure of Product 4
Installation 5-6
Operating Instructions 7-10
Points of intentions 10
Product parameters 10
Layout and storage 11
Care and maintenance 11-12
Troubleshooting guide 12-13
Warranty 13
3
● Wine Cooler Package Contents
Instruction Manual
1 Wine Cooler unit
● Important Safety Instructions
WARNING: To reduce the risk of fire, electric shock or personal injury, unplug or
disconnect the appliance from the power supply before servicing.
Read all instructions before using the wine cooler.
DANGER: Risk of child becoming trapped in new wine cooler, old wine
cooler/refrigeration unit, or large boxes. Junked or abandoned appliances, boxes and
other containers are still dangerous, even if they will just in the garage for a few days.
Before you throw away your old wine cooler:1.take off the door. 2.Leave the shelves in
place so that children cannot climb inside.
Never allow children to operate, play with, crawl inside the appliance.
Never clean appliance parts with flammable fluids. The fumes can create a fire hazard
or explosion.
Do not store in the vicinity of any other appliance. Do not store near gasoline or any
other flammable vapors. The fumes can create a fire hazard or explosion.
Before Using Your Wine Cooler
Remove the exterior and interior packaging.
Before connecting the wine cooler to power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Save These Instructions
Check the Troubleshooting Guide at the back of this manual. List of will occur
problems that you can fix it yourself.
4
Main Structure Of Product
1. Stainless steel Door
2. Stainless Steel Handle
3. Display Control panel
4. Display shelf
5. Roll-Out Wood Shelves
6. Lock
7. Adjustable Feet
5
Installation
Install handle
Locate the handle(1)over the pins(3)of the door and tighten the
handle by screwing the Allen key grub screws(2)
CAUTION: do not over tighten the screws
Loading...