THOMSON MT62 Addendum

Addendum

Beifügung

Appendice

Addendum

Apéndice

Anexo

Addendum

1

1. Additional buttons on your TV set for DVD function: ,

and .

2. Function updating for some buttons on the remote

control:

(1) Function of selecting picture format moves from

LEFT/RITHT button to /*Yellow button.

(2) Lang/*Red: In TV mode, it performs the same

function as before; in DVD mode, it can be used to
select an audio setting.

(3) Subtitles/*Green: In TV mode, it performs the same

function as before; in DVD mode, it can be used to
select a DVD subtitle language.

(4) TEXT/ : In TV mode, it performs the same function

as previous TEXT button; in DVD mode, it can be
used to switch the camera angle during playback.

(5) INFO: In TV mode, it performs the same function

as before; in DVD mode, it can be used to display
information on TV screen during playback.

(6) FAV : The same function as previous FAV. button.
(7) GUIDE: In TV mode, it performs the same function as

before; in DVD mode, it can be used to enter or exit
the setup menu.

(8) Picture button is used to replace previous PRESETS

button to perform the same function.

(9) Add Sound button to let user preset sound settings.
(10) BD/DVD/VOD button replaces previous DVD button

to enter DVD mode.

(11) Menu: In TV mode, it performs the same function as

before; in DVD mode, it can be used to enter or exit
the disc menu.

(12) PR+/-: In TV mode, it performs the same function as

before; in DVD mode, it can be used to skip to next or
previous title/chapter/track.

(13) A-B/*Blue: In TV mode, it performs the same function

as previous blue button; in DVD mode, it can be used
to repeat playback from point A to B on a disc.

(14) TEXT ZOOM: In TV mode, it performs the same

function as before; in DVD mode, it can be used to
enlarge a picture on the TV.

(15) /*Source: In TV mode, it performs the same function

as previous Source button; in DVD mode, it can be
used to open/close the disc tray.

(16) LIST: In TV mode, it performs the same function as

before; in DVD mode, it can be used to start playback
from a designated point.

(17) AV: Previous function is only available in TV mode.
(18) ECO: Disabled.
(19) T-LINK: Not exist for supplied new remote control.
(20) In the main book, function descriptions for Digital

Media and REC are ignored.

(21) REV , P L AY , FWD , STOP , PAUSE Also

work for DVD playback.

(22) REPEAT : Only available in DVD mode to select

various repeat mode.

3. Circuit diagram is upgraded to that shown on the last

page in this booklet.

4. In SPDIF type section, AC3 option is replaced by Dolby D.

DVD function:
DVD playback features

Starting disc playback

1. Turn on the TV, press BD/DVD/VOD on the remote control

to turn on the DVD mode.

Notes: - If the remote control is not used, hold down the

button on the set for 2 seconds to enter the DVD
mode.

- When the remote control is in DVD mode, and the

DVD is in pre-stop state, press P L AY on the remote
control to let the set enter normal operation state.

2. Place a disc into the disc tray with the label facing up. For

double-sided discs, load the side you want to play facing up.

3. Playback may start automatically. If not, press PL AY .

4. Depending on the disc, a disc menu may appear on the

TV once you load in the disc.

- To select a playback feature or item: Use UP/DOWN/
LEFT/RIGHT or number buttons, then press OK to start

playback.

- To access or remove the menu: Press Menu.

Note: If the child lock was activated for the inserted disc, you

have to enter your 4-digit password.

Basic playback controls
Pausing playback: During playback, press PAUSE to

pause playback and display a still picture. To resume normal
playback, press P L AY .
Selecting title/chapter/track: During playback, press PR+/-
to go to the previous or next title/chapter/track.

Forward/Reverse searching: During playback, press FWD

/REV to fast forward/reverse the disc and select a

desired search speed. To resume normal playback, press

P L AY .
Stopping playback: Press STOP .
Resuming playback: Resume playback of the last 5 discs is

possible, even if the disc was ejected, standby or power o.

Changing the audio language

Press Lang repeatedly to select dierent audio
languages.

Changing the subtitle language

Press Subtitles repeatedly to switch between dierent
subtitle languages available in the disc.

Repeat play mode

The repeat play options vary depending on the disc type.
Press REPEAT to repeatedly select dierent repeat
modes.

Viewing disc playback information & Direct access to
chosen chapter/title/time

You can view the disc information (such as current chapter/
title/time number, current playing time on the disc) without
interrupting the disc playback. You mayalso make your
playback skip to chosen chapter/titletime.

1. Press LIST, then use LEFT/RIGHT to select various options.

2. Use number buttons to enter valid numbers for chapter/

title/time( hours/minutes/seconds).

3. Press OK, playback will skip to the chosen chapter/title/

time.

EN