Thomson 14MS15UT User Manual
User
manual
User
manual
User
manual
14MS15UT
Mains connection
The TVis suitable for use on a.c. mains supply, 220-240V, 50 Hz only.
It must not be connected to d. c. mains.
ThemainsleadoftheTVisfittedwith a moulded plug.If themains
sockets are not compatible or if for any reason the plug is
removed please follow these directions:
The moulded plug cannot be rewired and if removed must be disposed of safely.
DO NOT under any circumstances plug the severedplug into any mains socket as this could
resultin electricshock.
IMPORTANT:Ifthe plug isremovedrewirenew plugas follows:The wiresin themains plug are
coloured in accordance with the followingcode: BLUE - NEUTRAL / BROWN- LIVE.
As the colours of the wires in the mains lead of this apparatus may not correspond with the
coloured markings identifying the terminals in yourplug, proceed as follows:
- BLUE wireto the terminal coded N (Neutral) or coloured black.
- BROWN wire to the terminal coded L (Live)or coloured red.
DO NOT make any connection to the terminal in the plug whichis marked bythe letter E or by
the safety earth symbol
Afused plugmust befittedwitha 5A fuseapprovedbyASTAorBSI toBS 1362andfuse covers
must always be securely replaced.
or coloured green or green and yellow.
Remote control batteries
The remote control requires two batteries size AA as supplied with the unit.
Unclip the cover at the rear and insert the batteries the correct way round as
shown. The ends are usually market+ and -.
Replace the batteries when the unit no longer operates at normal viewing distances.
When replacing batteriesdo not mix oldand new - donot mix makes andtypes.
alkalinetypes are recommended for long life. Never risk damage to the remote
controlby extreme heat -do not leave closeto a radiatoror on a windowledge
in direct sunshine.
Connections
2
1. Aerial Socket
Enables connection of the aerial and, if required, a video recorder (see manual for latter).
To tune the channel reserved for your video recorder, start up the recorder then carry out
MANUAL CHANNEL SETTING operations.
Store at any programme ending with a 9 (9,19,29, etc.)
Each time you use the video recorder, switch to the channel assigned to it.
2. SCART Socket
This is used to connect:
– a VHS, 8 MM, S–VHS or Hi–8 video recorder or camcorder,
– a PA Y TV decoder,
– a video games console.
To use the connected device, select the audiovis ual programme by pressing the
This selection is automatic for some devices.
AV is displayed at the bottom of the screen.
IfyouhaveanS-VIDEOdevice,pressthe
of the screen for a few seconds.
When you switch off the de vice and if you have not changed channel during play , the TV set
automatically returns to the previous channel.
If the TV set has been switched on by the video recorder, it will be placed on stand–by when the
video recorder is switched off.
buttonagain. S-VIDEO is then displayed at the bottom
button.
3. Audio / Video CINCH Sockets
These are used to connect a VHS or 8 mm camcorder .
Press the
When you switch off the connected de vice, the TV set remains in audiovisual (AV) mode.
Call up the channel you wish to watch using the numerical keypad on the remote control.
In order to maintain the optimum sound and picture quality of your TV set,avoidconnecting2 devices
to the SCART socket and the A UDIO/VIDEO sockets simultaneously .
button to select the audiovisual programme to view your recordings.
Remote Control
Display programme No. and
sleep timer
validatea menu option
To switch to connected
equipment
(Yellow button)
Display Timer Menu
(Green button)
Call up personal
adjustments
(Red button)
Confirm an action or
Toleaveamenu
Volume level
Sound mute
(e.g.: video recorder)
Stand-by
Inactive
Call upTeletext/Fastext (pur-
ple key)
Adjustment: move to
Right/Left in menus and
select one of the proposed
options
To go to Picture and
Channel Adjustment
menus
Move Up and Down in
the menus
To change programme
8
Direct access to
programmes and entering
numerical values in
menus
The red, yellow, green and
blue buttons are also used for
teletext.
Batteries: Remove the lid at the back of the remote control and insert two 1.5
V, LR06 (AA) batteries.
”Please respect the environment! Before throwing any batteries away, consult
your distributor who may be able to them back for specific recycling..”
4
Loading...