Thomson 10MG10U User Manual

User

manual

User

manual

User

manual

14MG10U

Mains connection and remote batteries

Mains connection

The TVis suitable for use on a.c. mains supply, 220-240V, 50 Hz only. It must not be connected to d. c. mains.

ThemainsleadoftheTVisfittedwith a moulded plug.If themains sockets are not compatible or if for any reason the plug is removed please follow these directions:

The moulded plug cannot be rewired and if removed must be disposed of safely. DO NOT under any circumstances plug the severedplug into any mains socket as this could

resultin electricshock. IMPORTANT:Ifthe plug isremovedrewirenew plugas follows:The wiresin themains plug are

coloured in accordance with the followingcode: BLUE - NEUTRAL / BROWN- LIVE. As the colours of the wires in the mains lead of this apparatus may not correspond with the

coloured markings identifying the terminals in yourplug, proceed as follows:

- BLUE wireto the terminal coded N (Neutral) or coloured black.

- BROWN wire to the terminal coded L (Live)or coloured red. DO NOT make any connection to the terminal in the plug whichis marked bythe letter E or by

the safety earth symbol Afused plugmust befittedwitha 5A fuseapprovedbyASTAorBSI toBS 1362andfuse covers

must always be securely replaced.

or coloured green or green and yellow.

Remote control batteries

The remote control requires two batteries size AA as supplied with the unit. Unclip the cover at the rear and insert the batteries the correct way round as shown. The ends are usually market+ and -.

Replace the batteries when the unit no longer operates at normal viewing distances.

When replacing batteriesdo not mix oldand new - donot mix makes andtypes. alkalinetypes are recommended for long life. Never risk damage to the remote controlby extreme heat -do not leave closeto a radiatoror on a windowledge in direct sunshine.

Connections

220- 240V ~ 50Hz

1. Aerial Socket

Enables connection of the aerial and, if required, a video recorder (see manual for latter). To tune the channel reserved for your video recorder, start up the recorder then carry out

MANUAL CHANNEL SETTING operations. Store at any programme ending with a 9 (9,19,29, etc.) Each time you use the video recorder, switch to the channel assigned to it.

2. SCART Socket

This is used to connect:

– a VHS, 8 MM, S–VHS or Hi–8 video recorder or camcorder, – a PA Y TV decoder, – a video games console. To use the connected device, select the audiovis ual programme by pressing the

This selection is automatic for some devices. AV is displayed at the bottom of the screen. IfyouhaveanS-VIDEOdevice,pressthe

of the screen for a few seconds. When you switch off the device and if you have not changed channel during play , the TV set

automatically returns to the previous channel. If the TV set has been switched on by the video recorder, it will be placed on stand–by when the

video recorder is switched off.

buttonagain. S-VIDEO is then displayed at the bottom

button.

Remote Control

Display programme No.

and sleep timer

DisplayTimer Menu

(Green button)

Call up personal

adjustments

(Red button)

Confirmanactionor

validate a menu

Toleaveamenu

Volume level

Sound mute

To switch to connected

equipment

(e.g.: video recorder)

(Yellow button)

option

Stand-by

Inactive

Adjustment: moveto Right/Left in menus and select one of the proposed options

To go to Picture and Channel Adjustment menus

Move Up and Down in the menus

To change programme

Direct access to programmes and entering numerical values in menus

Batteries: Remove the lid at the back of the remote control and insert two 1.5 V, LR06 batteries.

”Please respect the environment! Before throwing any batteries away, consult your distributor who may be able to take them back for specific recycling..”

+ 9 hidden pages