Thomasville Geneva 6278-544 Assembly Instructions Manual
ASSEMBLY INSTRUCTIONS
Lot Number: ___________________
Date Purchased: ________________
THIS INSTRUCTION
BOOKLET CONTAINS
IMPORTANT SAFETY
INFORMATION. PLEASE
READ AND KEEP FOR
FUTURE REFERENCE.
a Division of Thomasville Furniture Industries, Inc.
401 E. Main St., Thomasville, NC 27361
Geneva Workstation
Model #: 6278-544
Made in China
NOTE:
• It is recommended that two people assemble this case.
• Note the arrow direction on each panel when assembling the case.
READ THE INSTRUCTIONS before you begin assembly, read the instructions carefully. We
suggest starting with the subassembly of the parts before beginning the main assembly.
IDENTIFY THE PIECES AND HARDWARE. First, lay all the parts and hardware out on the floor
surface (preferably on carpet) as you see them in the Parts List. This will help you locate the
right item when you need it. NOTE: SOME PARTS MAY NOT BE IDENTIFIED WITH LABELS.
If you have any questions about your new furniture, just call 1 800 RTA-FURN (1 800 782-3876)
between 8:00a.m. - 5:00 p.m., Monday through Friday (Eastern Time). Holidays and weekends
will not be staffed. IMPORTANT: Have the part number handy when you call.
Furniture Care & Maintenance
To remove part labels, gently rub a soft cloth moistened with a mild household cleanser
(Windex or Pledge) over the part label. Then lift a corner of the label and pull firmly but
smoothly until the label comes off..
• Use a soft, clean cloth that will not scratch the surface when dusting.
• Use of furniture polish is not necessary. Should you choose to use polish, test in an
inconspicuous area.
• Using solvents of any kind on your furniture may damage the furniture’s finish.
• Never use water to clean your furniture as it may cause damage to the furniture’s finish.
• Always remember to use coasters under beverage glasses..
• Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently
and avoid rubbing.
• Always use protective pads under hot dishes or plates. Heat can cause chemical changes
that may create spotting with the furniture finish.
• Stains or marks from crayons or ink markers will be difficult to remove.
• In the event your furniture is stained or otherwise damaged during use, we recommend
that you call a professional to repair your furniture.
• Check bolts/screws periodically and tighten them if necessary.
Further Advise About Wood Furniture Care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and
humidity changes can cause fading, warping, shrinking and splitting of wood. It is advised to
keep furniture away from direct sunlight as sun may damage the finish. Proper care and
cleaning at home will extend the life of your purchase.. Follow the important and helpful tips
that will enhance your furniture as it ages. A Touch-up pen has been provided to repair any
small nicks or scratches that may occur during assembly or shipping.
Page 2
Questions? Just call 1 800 RTA-FURN (1 800 782-3876) between 8:00a.m. - 5:00 p.m., Monday -Friday (EST).
Page 3
Questions? Just call 1 800 RTA-FURN (1 800 782-3876) between 8:00a.m. - 5:00 p.m., Monday -Friday (EST).
A
B
C
D E
F
G
H
ITEM DESCRIPTION PART NUMBER QUANTITY
A Left Door 80186761 1
B Right Door 80186762 1
C Printer Tray 80186763 1
H Desktop Tray Organizer 80186768 1
G Adjustable Shelf 80186767 1
Component Part List – This unit come fully assembled
Please read completely through the instructions and verify that all parts listed are present
before beginning assembly. IF YOU NEED ASSISTANCE WITH ASSEMBLY OR TO ORDER PARTS,
PLEASE USE THE LIST BELOW AND CALL 1-800-782-3876 AND REFERENCE MODEL#: 6278-544
Loading...