Thomas & Betts Superstrut Catalog Page

Channel Nuts
Superstrut® channel nuts are manufactured from mild steel and are case hardened.
Design Data
Superstrut® self-aligning channel nuts are designed to provide resistance to pull out and resistance to side slip in excess of the full strength of the channels with which they are used. The extreme resistance to side slip
Metal Framing System
®
results from the unique design of the alternate teeth, spaced and designed to develop a wedging action that increases with pressure or load.
Load Ratings for 1⁄4", 3⁄8" and 1⁄2" Strut Nuts used in Superstrut
CHANNEL NUT
SIZES (IN.)
1
4 300 500
3
8 750 1,000
1
2 1,200 2,000
If connections will be subjected to dynamic or seismic loading conditions, contact the factory for design assistance.
1. All ratings have safety factor of 3 applied.
2. Load ratings are for Static Applications.
Metal Framing & Cable Tray — Superstrut
SLIP TEST
RATING PULL TEST RATING
UC-100 Universal Cone Nut
Eliminates the inventory and installation hassles of conventional spring nuts.
5
8" channel, regardless of depth, with a simple twist of your thumb.
Fits all 1 Pliable nylon cone secures the nut in place through the entire range of construction site temperatures.
Screw Threads
THREAD SIZE (IN.) THREADS PER INCH 20 16 13 DESIGN TORQUE (FT.–LBS.) 6 19 50
Standard Finish – GoldGalv®, unless otherwise stated.
®
All threaded products are American Standard thread, free fit class 2.
®
GoldGalv
hardware finish is standard for all Superstrut® products. This is a multi-process finish of electro-plated zinc, followed by gold­colored trivalent chromium to give excellent corrosion resistance and a superior paint base. See pages B-106–B-107 for a complete description of the GoldGalv
Note: Standard Spring and Springless Nuts are supplied with a silver electro-galvanized (EG) finish. These items are not visible in a gold system and are universal with other systems’ finishes and colorations.
®
hardware finish.
1
4
3
8
1
2
B-114
United States
Tel: 901.252.8000
800.816.7809 Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
A-100 Regular Spring Nut
Sizes: 1⁄4", 5⁄16", 3⁄8", 1⁄2",
5
8", 3⁄4" & 7⁄8" Nut is square over For all “A” and “C” series
channel and inserts.
1
2" size.
E-145 Standard Hex Nut
Sizes: 1⁄4", 3⁄8", 1⁄2", 5⁄8", 3⁄4",
7
8" & 1"
®
GoldGalv
Finish.
E-151-D Wood Screw Drive
Size A: 1⁄4" Size B: 2" Max. Rec. Load: 100 lbs.
A
B
Metal Framing & Cable Tray — Superstrut
AB-100 Springless Nut
Sizes: 1⁄4", 5⁄16", 3⁄8", 1⁄2",
5
8" & 3⁄4" Nut is square over For use with all channels. Silver Electroplated Finish.
1
2" size.
AC-100 Springless Nut
Sizes: 1⁄4", 3⁄8", 1⁄2", 5⁄8" & 3⁄4" Nut is square over For all “A”, “C”, “E” and “H” series
channel and inserts.
1
2" size.
B-100 Short Spring Nut
Sizes: 1⁄4", 5⁄16", 3⁄8" & 1⁄2" Nut is square over
For all “B” series channel and inserts.
1
2" size.
E-146 Standard Square Nut
Sizes: 1⁄4", 5⁄16", 3⁄8", 1⁄2" & 5⁄8"
®
GoldGalv
Finish.
E-147 Flat Steel Washer
Sizes: 1⁄4", 5⁄16", 3⁄8", 1⁄2",
5
8", 3⁄4" &7⁄8"
®
GoldGalv
Finish.
E-148 Lock Washer
Sizes: 1⁄4", 3⁄8", 1⁄2" & 5⁄8"
®
GoldGalv
Finish.
ES-142 Seismic Stiffener Nut
1
2"
1
2 x 11⁄2"
Size: ES-142­Bolt Dia.:
ES-145 Swivel Nut and Jam Nut Combinations
Sizes: 3⁄8" & 1⁄2"
®
GoldGalv
Finish.
H-100 Long Spring Nut
Sizes: 3⁄8", 1⁄2" & 5⁄8" Nut is square over For all “E” and “H” series
channel and inserts.
1
2" size.
®
Metal Framing System
CM-100 Nylon Cone Nut
Sizes: 1⁄4", 3⁄8" & *1⁄2"
5
For all 1
8" channel.
* Will not fit “B” series channel.
®
GoldGalv
Finish
E-142 Hex Head Cap Screw
Sizes: 1⁄4" x 1", 1⁄4" x 11⁄2",
3
8" x 1", 3⁄8" x 11⁄2", 1⁄2" x 15⁄16"
1
2" x 11⁄2"
& See price sheet for additional sizes.
www.tnb.com
E-149 Slotted Hex Indented Head Machine Screw
Sizes: 1⁄4" x 3⁄4", 1⁄4" x 1",
5
16" x 11⁄4" & 3⁄8" x 11⁄4"
E-150-S Lag Bolt Screw
Size: 3⁄8" & 1⁄2" Drill Size:
1
4" & 111⁄32"
United States
Tel: 901.252.8000
800.816.7809 Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
UC-100 Universal Nylon Cone Nut
Sizes: 1⁄4", 3⁄8" & 1⁄2"
5
For all 1
8" & 11⁄2" channels. May be used with ALL strut depths. Can be used for CM-100, A-100, B-100 & AB-100 Series.
®
GoldGalv
Finish.
B-115
Fender Washer
Cat. No. eF147 1/4
Metal Framing System
®
eF-147-3/8 eF-147-1/2
sIze (IN.) dIa. (IN.) hoLe std. (IN.) std. CtN.
Springless Stud Nut
A
A-177 to A-180
EF-147
1
4 11⁄4
3
8 11⁄2
1
2 2
Cat. No. a177 1/4 1
a-177-1/4 x 1-1/4 a-179-3/8 x 1 a-179-3/8 x 1-1/4 a-180-1/2 x 1* a-180-1/2 x 1-1/4*
* Cannot be used with “B” Series channel.
BoLt dIa.
(IN.)
1
1
3
3
1
1
5
16 100
7
16 100
9
16 100
LeNgth a
(IN.)
std. CtN.
4 1 50 ⁄4 11⁄4 250 ⁄8 1 250 ⁄8 11⁄4 50 ⁄2 1 250 ⁄2 11⁄4 250
Standard Finish – GoldGalv®, unless otherwise stated.
Regular Spring Stud Nut
A-182 to A-185
Cat. No. a182 1/4 1
a-182-1/4 x 1-1/4 a-184-3/8 x 1 a-184-3/8 x 1-1/4 a-185-1/2 x 1 a-185-1/2 x 1-1/4
For all “A” and “C” series channels.
BoLt dIa. (IN.) LeNgth a (IN.) std. CtN.
1
4 1 250
1
4 11⁄4 250
3
8 1 50
3
8 11⁄4 50
1
2 1 50
1
2 11⁄4 50
Metal Framing & Cable Tray — Superstrut
Swivel Eye
Swivel Eye with Stud
Swivel Joint
B
Cat. No. e120 3/8 13⁄8
A
e120 1/2 1
E-120 E-122
a
(IN.)
B
desIgN
(IN.)
Load LBs.
3
8 1,000 25
1
2
1
2 1,800 25
std. CtN.
Swivel Joint with Stud
B
Cat. No. e130 3/8 13⁄8
A
e-130-1/2 1
E-130 E-131
a
(IN.)
1
B
desIgN
(IN.)
Load LBs.
3
8 1,000 25
2
1
2 1,800 25
std. CtN.
B
Cat. No.
A
e122 3/8 13⁄8
A
e-122-1/2 1
Standard Finish – GoldGalv®, unless otherwise stated.
B
Cat. No.
A
e131 3/8 13⁄8
A
e-131-1/2 1
Standard Finish – GoldGalv®, unless otherwise stated.
a
(IN.)
1
a
(IN.)
1
B
(IN.)
2
(IN.)
2
desIgN
Load LBs.
3
8 1,000 25
1
2 1,800 10
B
desIgN
Load LBs.
3
8 1,000 25
1
2 1,800 10
std. CtN.
std. CtN.
B-116
United States
Tel: 901.252.8000
800.816.7809 Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
E-151 — Coach Screw Rod
H104 Hanger Rod, Continuous Thread — GoldGalv
®
Metal Framing & Cable Tray — Superstrut
H-104 Series Rod
• Blackavailableuponrequest
• Machine-threadedoppositeend,carbonsteel
• OrderbyCat.No.,rodsizeandrodlength
Cat. No. e-151-3/8
e-151-1/2
rod sIze (IN.)
3
8 4, 6, 8, 10, 12 100
1
2 4, 6, 8, 10 100
H104-EG Hanger Rod, Continuous Thread — SilverGalv
Cat. No.
staNdard
rod LeNgths std. CtN.
®
sIze
Wt./LBs.
per 100 pCs.
h104 1/4x6-eg 73
1
h104 1/4x10-eg
4"–20 124
h104 1/4x12-eg 148 h104 3/8x6-eg 172
3
h104 3/8x10-eg
8"–16 293
h104 3/8x12-eg 348 h104 1/2x6-eg 313
1
h104 1/2x10-eg
2"–13 530
h104 1/2x12-eg 648 h104 5/8x6-eg 510
5
h104 5/8x10-eg
8"–11 850
h104 5/8x12-eg 1,020
Suffix indicates rod size and length.
Cat. No.
sIze
Wt./LBs.
per 100 pCs.
h104 1/4x6 73
1
h104 1/4x10
4"–20 124
h104 1/4x12 148 h104 3/8x6 172
3
h104 3/8x10
8"–16 293
h104 3/8x12 348 h104 1/2x6 313
1
h104 1/2x10
2"–13 530
h104 1/2x12 648 h104 5/8x6 510
5
h104 5/8x10
8"–11 850
h104 5/8x12 1,020
Suffix indicates rod size and length.
Standard Rod Coupling
A
Cat. No. h119-1/4
h119-5/16 h119-3/8 h119-1/2 h119-5/8 h119-3/4 h119-7/8 h119-1 1 2
Standard Finish – GoldGalv®, unless otherwise stated.
rod sIze
(IN.)a (IN.)
1
4
5
16
3
8 11⁄8 50
1
2 11⁄4 50
5
8 21⁄8 50
3
4 21⁄4 50
7
8 21⁄2 50
7
8 50
7
8 50
1
4 50
std. CtN.
Reducing Rod Coupling
A
Cat. No. h119-1/4x3/81⁄4–3⁄8 11⁄2 50
h119-3/8x1/2 h119-1/2x5/8 h119-5/8x3/4 h119-3/4x7/8
Standard Finish – GoldGalv®, unless otherwise stated.
rod sIze
(IN.)a (IN.)
3
8–1⁄2 11⁄4 50
1
2–5⁄8 11⁄4 50
5
8–3⁄4 11⁄2 50
3
4–7⁄8 13⁄4 50
std. CtN.
®
Metal Framing System
U-571, U-572 Conduit Clamp
A
U-571, U-572
www.tnb.com
Cat. No. u-571
u-571
CoNduIt sIze (IN.) Max. FLaNge thICkNess (IN.) dIM. a (IN.) std. CtN.
1
2 1 13⁄4 25
3
4
u-571 1
3
u-572
4 11⁄2 21⁄2 25
u-572 1 1
1
u-572 1 u-572 1
Standard Finish – GoldGalv® brand.
For attaching Secures conduit to the support parallel or at right angles to it.
5
16" set screw, 12 ga. material.
1
2" thru 11⁄2" conduit to beam, channel, angle or column.
United States
Tel: 901.252.8000
4 1 21⁄2 25
1
2
Technical Services
Tel: 888.862.3289
800.816.7809 Fax: 901.252.1354
3
4 13⁄4 25
1
2 13⁄4 25
1
4 21⁄2 25
5
8 21⁄2 25
B-117
Loading...