Page 1
Rigid/Aluminum Conduit Bodies, Gaskets and Covers
Conduit Bodies, Covers and Gaskets
Applications
• Junction for branch conduits —
“A” Series bodies for Rigid and IMC
conduit maintain a weather resistant
conduit system when used with
covers and gaskets
• “B” Series bodies for thin wall conduit
(EMT) saves cost of connector and
labor in indoor applications
• Spacious, accessible wiring chamber
provides a convenient location to pull
conductors and make splices
• Aluminum conduit bodies can be used
with steel rigid conduit — NEC 346-1,
and Steel EMT, NEC 348-1
Features/Benefits
• Copper-free* aluminum provides
increased corrosion resistance
• Precision cast and machined surfaces
Weatherproof Boxes and Covers
permit safer wire pulling
• Clean cover edges provide good
gasket sealing
• Precision NPT threaded and set screw
hubs allow trouble-free field
installation for rigid, IMC or EMT
conduit
Standard Finish
• Conduit bodies and die cast covers:
powder coated
• Stamped covers: Natural
Standard Materials
• Conduit Bodies: Die cast aluminum
alloy A360 with less than .004 copper
content (copper-free)
• Covers: (CV Series) Die cast aluminum
alloy A360 with less than .004 copper
content (copper-free), and stainless
steel screws
• Covers: (SCV Series) Stamped
aluminum alloy with less than .004
copper content (copper-free), and
stainless steel screws
• Gaskets: (GKN Series) Neoprene
• Gaskets: (GKV Series) Composition
Compliances
• UL Listed
• CSA Certified
• Federal Spec. W-C-586
• NEC Article 370-28
Sample Specifications
• Conduit bodies shall be die cast
copper-free* aluminum alloy A360.All
conduit stops shall be free of rough
edges. Conduit bodies shall
be finished with powder coated paint.
Conduit bodies shall be Red•Dot
Catalog No. _______________
*Less than .004 copper content
Clean Cover Edges
Copper-Free
Aluminum
Smooth
Conduit
Stops
Clear
Markings
Retained Deep
Slotted Stainless
Steel Screws
Precision
Machined
Threads
®
• Retained deep slotted stainless steel
cover screws for faster installation
• Clear UL, CSA and cubic content
markings speed approval by
inspectors
ALB
Conduit Bodies, Covers and Gaskets — A Series
C Style
• Fittings, covers and gaskets are
interchangeable with those
produced by other leading
manufacturers.
• Finish: Powder coated urethane.
A
B
Type AC
CAT. NO.
AC-1-RD1⁄2"3
AC-2-RD3⁄4"4
AC-3 1" 53⁄8 13⁄4 25
AC-4-RD 11⁄4"71⁄4 21⁄2 10
AC-5 11⁄2"71⁄4 21⁄8 10
AC-6-RD 2" 91⁄2 31⁄2 5
AC-7* 21⁄2"121⁄4 41⁄2 1
AC-8* 3" 121⁄4 41⁄2 1
AC-9* 31⁄2"15 51⁄2 1
AC-10-RD* 4" 15 51⁄2 1
TRADE STD.
SIZE A B CTN.
7
⁄8 121⁄64 50
5
⁄8 117⁄32 50
ALL
CAT. NO.
D-PAK™*
DAC-1-CG
DAC-2-CG
DAC-3-CG 1" 8
DAC-4-CG 11⁄4"6
DAC-5-CG 11⁄2"5
DAC-6-CG 2" 2
DAC-7-CG 21⁄2"2
DAC-8-CG 3" 2
DAC-9-CG 31⁄2"2
DAC-10-CG 4" 2
* Shipped with cover. Price includes cost of cover and body.
UL File No. E-28688.
BT
HUB SIZE CTN.
1
⁄2"12
3
⁄4"15
STD.
Loading...