Page 1
ASSEMBLY INSTRUCTIONS
For Type B NM Liquid-Tight Conduit and XTRA FLEX® Flexible Tubing
1. Cut conduit clean and square.
2. Insert conduit through gland-nut opening and push conduit
rmly to bottom with a slight twist.
3. Tighten gland-nut to bottom.
NOTE: In wet locations use the appropriate 5262 Series Sealing
Ring between box and tting for knock-out applications.
WARRANTY: Thomas & Betts sells this product with the understanding that the user will
perform all necessary tests to determine the suitability of this product for the user's intended
application. Thomas & Betts warrants that this product will be free from defects in materials and
workmanship for a period of two (2) years following the date of purchase. Upon prompt
notication of any warranted defect, Thomas & Betts will, at its option, repair or replace the
defective product or refund the purchase price. Proof of purchase is required. Misuse or
unauthorized modication of the product voids all warranties.
Limitations and Exclusio ns: THE ABOVE WARRANTY IS THE SOLE WARRAN TY
CONCERNING THIS PRODUCT, AND IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS
OR IMPLIED, INCLUDIN G BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHAN TABILITY O R FITN ESS FO R A PARTICULAR PURPOSE , WHIC H ARE
SPECIFICALLY DISCLAIMED. LIABILITY FOR BREACH OF THE ABOVE WARRANTY IS
LIMITED TO COST OF REPAIR OR REPLACEMENT OF THE PRODUCT, AND UNDER NO
CIRCUMSTANCES WILL THOMAS & BETTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Thomas & Betts Corporation
Memphis, Tennessee
© 2010 Thomas & Betts. All Rights Reserved.
www.tnb.com
TA00972 B
Page 1 of 1
Loading...