Thomas & Betts E27 Data Sheet

Representative

Catalog Number: E27
Product ID:
UPC Number:
EAN Number:
Status:

BlueKote Dead End (E) Form 7, 3/4 Inch Conduit Body, Body Material Gray Iron with Zinc
Plating and Baked On Epoxy Powder Coat with BlueKote Internal Coating for Use with Rigid/
IMC Conduit

• Eliminates rough internal surfaces that can cut into cable jacket, insulation and con­ductors during pulling and also reduces installation time and risk of installer strain.

• Triple-layer protection...including two layers of epoxy coating which stops corrosion in
its tracks.

• Bodies are designed with a flat back, allowing more cubic inch capacity.

• T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and
Appleton's Form 7 bodies and covers.

• Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for
wiring devices and lighting fixtures and to provide access to conductors for mainte­nance and future system changes.

North American Specifications (UNSPSC)

UNSPSC 39131708 Electrical conduit fitting body
IGCC 5563 Electrical conduit fitting body
Type Form 7 Conduit Body
Special Features BlueKote Teflon Based Internal Finish Provides a

Application Conduit Bodies are Installed In Conduit Systems to

Standard UL E2969, CSA
Hub Size 3/4 in
Form Form 7
Material Gray Iron
Finish Zinc Plated with Epoxy Powder Coat

7TAD013240R0013
78621008680
05415022258172
A

Slick, Easy-Glide Internal Surface Which Signifi­cantly Lowers the Amount of Force Necessary to
Pull Wires.

Connect Sections, Act As Pull Outlets When Con­ductors are Being Installed and Provide Easy Ac­cess for Splices In Branch Conductors.

Packaging

Inner Quantity 1
Inner Dimensions (inches) 8x8x4
Outer Quantity 5
Outer Dimensions (inches) 12.75x7x3.5
Weight Uom 1.35 lbs. Each

Documents / Support Tools

Technical Drawing / Data Sheet US Available on Website

Header

3D Model Available on Website