Thomas & Betts CC-NPT-1-G Installation Manual

CONDUIT FITTINGS

Non-Metallic Cable Glands

WARNING

RISK OF SHOCK, DISCONNECT

POWER BEFORE INSTALLATION.

• Flame Retardant UL 94V2

• Suitable for NEMA type 4X and type 6 IP 68 5 Bar

• UL Listed, CSA Listed for certain ranges of cable

• Strain Relief

• Non-Metallic construction provides corrosion,

chemical & impact protection

CLAMPING RANGE LENGTH

MAX. MIN.

CAT. NO.

THREAD

SIZE

• Working Temperatures: -20ºC (-4ºF) to 100ºC (+212ºF)
Continuous, -30ºC (-86ºF) +150ºC (+276ºF)
Intermittent

• Sturdy Nylon 6 for Strong, lightweight construction

• Low prole cable gland for tight spots

• VDE Rated

OF

THREAD

LOCKNUT

CAT. NO.

CC-NPT-38-G 3/8” NPT 0.394” / 10mm 0.197” / 5mm 0.590” / 15mm —

CC-NPT-12-G 1/2” NPT 0.551” /14mm 0.394” / 10mm 0.590” / 15mm LN-501

CC-NPT-34-G 3/4” NPT 0.709” / 18mm 0.511” / 13mm 0.590” / 15mm LN-502

CC-NPT-1-G 1” NPT 0.984” / 25mm 0.709” / 18mm 0.709” / 18mm LN-503

CC-NPT-12-G-2 0.5” NPT Qty. (2) 0.222” Cables 5.5mm 0.590” / 15mm LN-501

CC-NPT-12-G-3 0.5” NPT Qty. (3) 0.220” Cables 5.5mm 0.590” / 15mm LN-501

CC-NPT-34-G-2 0.75” NPT Qty. (2) 0.260” Cables 6.6mm 0.590” / 15mm LN-502

CC-NPT-34-G-3 0.75” NPT Qty. (3) 0.260” Cables 6.6mm 0.590” / 15mm LN-502

CC-NPT-34-G-4 0.75” NPT Qty. (4) 0.260” Cables 6.6mm 0.590” / 15mm LN-502

CC-PG7-G 7 PG 0.256” / 6.5mm 0.118” / 3mm 0.315” / 8mm LN-PG7-G

CC-PG9-G 9 PG 0.135” / 8mm 0.157” / 4mm 0.315” / 8mm LN-PG9-G

CC-PG11-G 11 PG 0.394” / 10mm 0.197” / 5mm 0.315” / 8mm LN-PG11-G

CC-PG135-G 13.5 PG 0.473” / 12mm 0.236” / 6mm 0.394” / 10mm LN-PG135-G

CC-PG16-G 16 PG 0.551” / 14mm 0.394” / 10mm 0.394” / 10mm LN-PG16-G

CC-PG21-G 21 PG 0.709” / 18mm 0.512” / 13mm 0.433” / 11mm LN-PG21-G

CC-PG29-G 29 PG 0.984” / 25mm 0.709” / 18mm 0.433” / 11mm LN-PG29-G

CC-PG36-G 36 PG 1.260” / 32mm 0.867” / 22mm 0.519” / 13mm LN-PG36-G

CC-ISO-16-G 16mm ISO 0.394” / 10mm 0.197” / 5mm 0.394” / 10mm LN-ISO-16-G

CC-ISO-20-G 20mm ISO 0.473” / 12mm 0.236” / 6mm 0.394” / 10mm LN-ISO-20-G

CC-ISO-25-G 25mm ISO 0.709” / 18mm 0.512” / 13mm 0.394” / 10mm LN-ISO-25-G

CC-ISO-32-G 32mm ISO 0.984” / 25mm 0.709” / 18mm 0.590” / 15mm LN-ISO-32-G

WARRANTY: Thomas & Betts sells this product with the understanding that the user will perform all
necessary tests to determine the suitability of this product for the user's intended application. Thomas
& Betts warrants that this product will be free from defects in materials or workmanship for a period of
two (2) years following the date of purchase. Upon prompt notication of any warranted defect,
Thomas & Betts will, at its option, repair or replace the defective product. Misuse, misapplication or
modication of Thomas & Betts Products immediately voids all warranties.

Limitations and Exclusions: THE ABOVE WARRANTY IS THE SOLE WARRANTY CONCERNING

THIS PRODUCT, AND IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE SPECIFICALLY DISCLAIMED. LIABILITY
FOR BREACH OF THE ABOVE WARRANTY IS LIMITED TO COST OF REPAIR OR REPLACEMENT
OF THE PRODUCT, AND UNDER NO CIRCUMSTANCES WILL THOMAS & BETTS BE LIABLE FOR
ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.

© 2014 Thomas & Betts. All Rights Reserved.

NOTE: Sufx “G” may change indicating color.

Thomas & Betts Corporation

Memphis, Tennessee

www.tnb.com

TA02021 E Page 1 of 1