Thomas & Betts C50M Data Sheet

Catalog Number: C50M Product ID: UPC Number: EAN Number: Status:

Series 35 Thru-Feed, 1/2 Inch Conduit Body, Body Material Malleable Iron, Finish Zinc Plating with an Aluminum, Acrylic Coating for Use with Rigid/IMC Conduit

• Features tapered, threaded NPT hubs.

• Covers available in iron or stamped steel, both zinc-plated and supplied with stainless steel captive screws.

• Suitable for use in concrete.

7TAD013210R0012 78621096192 05415022259308 A

Actual

• Serve as pulling outlets during conductor installation

• Provide easy access for splices in branch conductors

• Make 90 degree bends in conduit runs

• Act as mounting outlets for wiring devices and lighting fixtures

• Provide access to conductors for maintenance and future system changes

North American Specifications (UNSPSC)

UNSPSC 39131708 Electrical conduit fitting body IGCC 5563 Electrical conduit fitting body Type Series 35 Conduit Body Special Features Zinc-Plated Iron Construction with Aluminum Acrylic

Coating Provides Durability, Impact Resistance and Corrosion Resistance.

Application Conduit Bodies are Installed In Conduit Systems to

Connect Sections, Act As Pull Outlets When Conductors are Being Installed and Provide Easy Ac-

cess for Splices In Branch Conductors. Standard UL E2969, CSA Hub Size 1/2 in Material Malleable Iron Finish Zinc Plating with Aluminum Acrylic Coating

Packaging

Outer Quantity 10 Outer Dimensions (inches) 8x5.75x3.75 Weight Uom 75 lbs. per 100

Documents / Support Tools

Technical Drawing / Data Sheet WSD-000253