Thomas & Betts C37 Data Sheet

Representative

Catalog Number: C37
Product ID:
UPC Number:
EAN Number:
Status:

BlueKote Thru-Feed Form 7, 1 Inch Conduit Body, Body Material Gray Iron with Zinc Plating
and Baked On Epoxy Powder Coat with BlueKote Internal Coating for Use with Rigid/IMC
Conduit

• Eliminates rough internal surfaces that can cut into cable jacket, insulation and con­ductors during pulling and also reduces installation time and risk of installer strain.

• Triple-layer protection...including two layers of epoxy coating which stops corrosion in
its tracks.

• Bodies are designed with a flat back, allowing more cubic inch capacity.

• T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and
Appleton's Form 7 bodies and covers.

• Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for
wiring devices and lighting fixtures and to provide access to conductors for mainte­nance and future system changes.

North American Specifications (UNSPSC)

UNSPSC 39131708 Electrical conduit fitting body
IGCC 5563 Electrical conduit fitting body
Type Form 7 Conduit Body
Special Features BlueKote Teflon Based Internal Finish Provides a

Application Conduit Bodies are Installed In Conduit Systems to

Standard UL E2969, CSA
Hub Size 1 in
Form Form 7
Material Malleable Iron
Finish Zinc Plated with Epoxy Powder Coat

7TAD013230R0003
78621092459
05415022228687
A

Slick, Easy-Glide Internal Surface Which Signifi­cantly Lowers The Amount of Force Necessary to
Pull Wires.

Connect Sections, Act As Pull Outlets When Con­ductors are Being Installed and Provide Easy Ac­cess for Splices In Branch Conductors.

Packaging

Inner Quantity 5
Inner Dimensions (inches) 8.25x5.25x4.25
Outer Quantity 20
Outer Dimensions (inches) 10.5x8.62x8.37
Weight Uom 1.96 lbs. Each

Documents / Support Tools

Technical Drawing / Data Sheet US Available on Website

Header

3D Model Available on Website