Page 1
Delayed Action Receptacle Plugs
Instruction Sheet
for Interior Retaining Screw
Catalog Numbers: 4267BC & 4268BC
WARNING
RISK OF SHOCK, DISCONNECT
POWER BEFORE INSTALLATION.
WARRANTY: Thomas & Betts sells this product with the understanding that the user will perform all necessary tests to determine the suitability of this product for the user's
intended application. Thomas & Betts warrants that this product will be free from defects in materials or workmanship for a period of two (2) years following the date of purchase.
Upon prompt notication of any warranted defect, Thomas & Betts will, at its option, repair or replace the defective product. Misuse, misapplication or modication of Thomas &
Betts Products immediately voids all warranties.
Limitations and Exclusions: THE ABOVE WARRANTY IS THE SOLE WARRANTY CONCERNING THIS PRODUCT, AND IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE
SPECIFICALLY DISCLAIMED. LIABILITY FOR BREACH OF THE ABOVE WARRANTY IS LIMITED TO COST OF REPAIR OR REPLACEMENT OF THE PRODUCT, AND
UNDER NO CIRCUMSTANCES WILL THOMAS & BETTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Interior Retaining Screws
Tighten screws to 15-20 in.-lbs.
Additionally, a thread locker such as LocTite* may be
used if deemed appropriate for end use.
CAUTION
OVER TIGHTENING OF THE INTERIOR RETAINING
SCREWS WILL DAMAGE THE THREADS.
*LocTite is a Registered Trademark of Henkel AG & Co.
© 2013 Thomas & Betts. All Rights Reserved.
Thomas & Betts Corporation
Memphis, Tennessee
www.tnb.com
TA04769 A Page 1 of 1
Loading...