Page 1
Event Par IP65 4in1 14x8W,
Event Par IP65 4in1 14x8W WDMX
User manual
LED PAR
Page 2
Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: info@thomann.de
Internet: www.thomann.de
22.05.2019, ID: 452127_435626
Page 3
Table of contents
Table of contents
1 General information................................................................................................................................. 6
1.1 Further information........................................................................................................................... 7
1.2 Notational conventions.................................................................................................................... 8
1.3 Symbols and signal words............................................................................................................... 9
2 Safety............................................................................................................................................................ 12
3 Features....................................................................................................................................................... 17
4 Installation.................................................................................................................................................. 19
5 Starting up.................................................................................................................................................. 23
6 Connections and controls................................................................................................................... 27
7 Operating.................................................................................................................................................... 33
7.1 Starting the device........................................................................................................................... 33
7.2 Main menu.......................................................................................................................................... 33
7.3 Menu overview................................................................................................................................. 37
7.4 Functions in 4-channel DMX mode........................................................................................... 39
7.5 Functions in 7-channel DMX mode........................................................................................... 39
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
3
Page 4
Table of contents
7.6 Functions in 9-channel DMX mode........................................................................................... 41
7.7 Remote control................................................................................................................................. 43
8 Technical specications....................................................................................................................... 46
9 Plug and connection assignments.................................................................................................. 49
10 Troubleshooting...................................................................................................................................... 50
11 Cleaning....................................................................................................................................................... 52
12 Protecting the environment.............................................................................................................. 53
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
4
LED PAR
Page 5
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
5
Page 6
General information
1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
6
LED PAR
Page 7
1.1 Further information
General information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search
Online guides
Personal consultation For personal consultation please contact our technical hotline.
Service
Use the search function in the electronic version to nd the topics of
interest for you quickly.
Our online guides provide detailed information on technical basics
and terms.
If you have any problems with the device the customer service will
gladly assist you.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
7
Page 8
General information
1.2 Notational conventions
This manual uses the following notational conventions:
Letterings
Displays
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
8
LED PAR
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’.
Page 9
General information
Instructions
The individual steps of an instruction are numbered consecutively. The result of a step is
indented and highlighted by an arrow.
Example:
1. Switch on the device.
2. Press [Auto].
3. Switch o the device.
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Automatic operation is started.
ð
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
9
Page 10
General information
Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – hot surface.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
10
LED PAR
Page 11
Warning signs Type of danger
Warning – dangerous optical radiation.
Warning – suspended load.
Warning – danger zone.
General information
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
11
Page 12
Safety
2 Safety
Intended use
This device is intended for use as an electronic lighting eect by means of LED technology. The
device is designed for professional use and is not suitable for use in households. Use the
device only as described in this user manual. Any other use or use under other operating con‐
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Extend the life of the device by regular breaks in operation and avoid switching it on and o
frequently. This device is not suitable for continuous use.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
12
LED PAR
Page 13
Safety
Safety
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by short-circuit
Do not modify the mains cable or the plug. Failure to do so could result in electric
shock/death or re. If in doubt, seek advice from a registered electrician.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
13
Page 14
Safety
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
14
LED PAR
Page 15
Safety
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
WARNING!
Risk of burns
The surface of the device can become very hot during operation.
Do not touch the device with bare hands during operation, and after switching
o wait for at least 15 minutes.
NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
15
Page 16
Safety
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
16
LED PAR
Page 17
3 Features
Features
Silent stage spotlight, ideal for use on stages and in noise-sensitive environments.
Special features of the device:
n 14 × 4in1-LEDs (RGBW, 8 W each)
n Control via DMX, buttons and display on the unit as well as via remote control (included)
n Built-in automatic show programmes
n Master / Slave operation
n Protection class IP65
n Sturdy double bracket for secure attachment to trusses or rm footing on the ground
n Rugged die-cast aluminium housing
Varytec Event Par IP65 4in1 14x8W WDMX also:
n Built-in wireless solution receiver module (G5) for wireless control
n W-DMX transmitter optionally available (item number 366876)
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
17
Page 18
Features
Information about protection
class IP65
Equipment with protection class IP65 are dust-tight and completely protected against contact
(rst code number). They are also protected against splash water from any angle (second code
digit). That is why this equipment can also be used outdoors. Event technology equipment is
generally only designed for temporary use however (event lighting) and not for permanent
use outdoors.
The specied protection class does not make a statement about the weather resistance of the
equipment (resistance to changing ambient conditions as well as against the eects of sun‐
light and UV rays).
The seals and screw connections of the equipment must be checked regularly to ensure a
fault-free operation. In cases of doubt, consult a specialist workshop in due time.
For technological reasons, the light output of LEDs decreases over their lifetime. This eect
increases with higher operating temperature. You can extend the service life of the illuminants
by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
18
LED PAR
Page 19
4 Installation
Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
19
Page 20
Installation
NOTICE!
Risk of overheating
Always ensure sucient ventilation.
The ambient temperature must not exceed the limits stated in the chapter Tech‐
nical Specications of the User Manual.
NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
20
LED PAR
Page 21
Installation
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
ers.
NOTICE!
Possible damage due to moisture
Moisture entering into open connectors (plugs and couplers) of DMX or power
cords can cause short circuits.
Close unused connectors with end caps intended for this purpose
(www.thomann.de).
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
21
Page 22
Installation
Mounting options
You can install the unit in hanging or standing position. When in use, the device must always
be attached to a solid surface or an approved truss. Use the openings provided on the twopiece bracket for attaching.
Always work from a stable platform whenever installing, moving or servicing the unit. In doing
so, the area underneath the unit must be cordoned o.
Please note that this device must not be connected to a dimmer.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
22
LED PAR
Page 23
5 Starting up
Starting up
Create all connections while the device is o. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
23
Page 24
Starting up
Connections in DMX mode
Connect the DMX input of the device to the DMX output of a DMX controller or another DMX
device. Connect the output of the rst DMX device to the input of the second one, and so on
to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain
is terminated with a resistor (110 Ω, ¼ W).
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
24
LED PAR
Page 25
Starting up
Connections in master/slave
mode
When you congure a group of devices in master/slave mode, the rst unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the rst slave device. Then connect the DMX output of the rst slave device to
the DMX input of the second slave device and so on.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
25
Page 26
Starting up
Inserting the battery into the
remote control
Press the lock of the battery holder to the centre of the housing and pull out the battery holder
like a drawer. Insert the battery. The battery is correct if the positive pole points to the housing
base of the remote control. Slide the battery holder back into the remote until it clicks into
place.
When shipping, the battery is already installed in the remote and protected against discharge
by a transparent plastic foil. Remove the plastic foil prior to rst use.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
26
LED PAR
Page 27
6 Connections and controls
Varytec Event Par IP65 4in1
14x8W (item number 435626)
Connections and controls
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
27
Page 28
Connections and controls
1 Display and keypad
[MENU]
Activates the main menu, changes between menu levels or closes a submenu.
[DOWN]
Decreases the displayed value by one.
[UP]
Increases the displayed value by one.
[ENTER]
Opens a submenu or conrms a value.
2 Pressure compensation element
3 Locking screws for the brackets.
4 [DMX IN]
DMX input, designed as 3-pin XLR chassis-mounted plug (IP65)
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
28
LED PAR
Page 29
5 [DMX OUT]
DMX output, designed as 3-pin XLR chassis-mounted coupling (IP65)
6 Two-piece bracket for hanging or oor setup
7 [POWER OUT]
Lockable output socket (Power Twist TR1 IP65) for the power supply of further devices
8 [POWER IN]
Lockable input socket (Power Twist TR1 IP65) for powering the device
Connections and controls
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
29
Page 30
Connections and controls
Varytec Event Par IP65 4in1
14x8W WDMX (item number
452127)
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
30
LED PAR
Page 31
1 Display and keypad
[MENU]
Activates the main menu, changes between menu levels or closes a submenu.
[DOWN]
Decreases the displayed value by one.
[UP]
Increases the displayed value by one.
[ENTER]
Opens a submenu or conrms a value.
2 Pressure compensation element
3 Locking screws for the brackets.
4 [DMX IN]
DMX input, designed as 3-pin XLR chassis-mounted plug (IP65)
Connections and controls
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
31
Page 32
Connections and controls
5 [DMX OUT]
DMX output, designed as 3-pin XLR chassis-mounted coupling (IP65)
6 Two-piece bracket for hanging or oor setup
7 [POWER OUT]
Lockable output socket (Power Twist TR1 IP65) for the power supply of further devices
8 [POWER IN]
Lockable input socket (Power Twist TR1 IP65) for powering the device
9 [ANT]
Antenna for wireless control via W-DMX
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
32
LED PAR
Page 33
7 Operating
7.1 Starting the device
7.2 Main menu
Operating
Connect the device to the power supply to start operation. The display shows the current DMX
address. The device is operational.
Press [MENU] to activate the main menu. Use [UP]or [DOWN] to select a submenu or a value.
When the display shows the desired submenu or value, press [ENTER] to open the submenu or
to select the desired value. To close the main menu, press [MENU].
All previously made settings are retained even when you disconnect the device from the
power grid.
The following table shows the setting options.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
33
Page 34
Operating
Display Function
‘Addr’ Sets a DMX address between between 1 and 512.
Display: ‘A001’ …‑ ‘A512’
‘Chnd’ Sets the channel modes in operating mode DMX.
Display: ‘CH4’ , ‘CH7’, ‘CH9’
‘MAnu’ Adjusts the intensity of the colours red, green, blue and white.
Display: ‘red’ , ‘Gree’, ‘bLUe’, ‘Whte’
‘CoLo’ Denes a default colour.
Display: ‘Co1’ … ‘CO15’
‘Auto’ Adjusts an eect.
Display: ‘SH-1’ … ‘SH-5’
Adjusts the eect speed.
Display: ‘SP01’ … ‘SP05’
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
34
LED PAR
Page 35
Operating
Display Function
‘FAde’ Adjusts the fader.
Display: ‘FA-1’ … ‘FA-5’
Adjusts the fader speed.
Display: ‘SP01’ … ‘SP05’
‘Soun’ Adjusts the microphone sensitivity for sound control.
Display: ‘So00’ … ‘S010’
‘FLSH’ Adjusts the strobe speed.
Display: ‘FL01’ … ‘FL15’
‘SLAU’ Enables / disables the slave mode. In slave mode, the device auto‐
matically follows the settings of the master device.
Slave mode enabled: ‘SL n’
Slave mode disabled: SL u
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
35
Page 36
Operating
Display Function
‘Ulrl’ Enables wireless control via WDMX (available only for Varytec Event
Par IP65 4in1 14x8W WDMX).
WDMX enabled: ‘on’
WDMX disabled: oFF
‘Ir’ Enables or disables the remote control.
Remote control enabled: ‘on’
Remote control disabled: oFF
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
36
LED PAR
Page 37
7.3 Menu overview
Varytec Event Par IP65 4in1
14x8W (item number 435626)
Operating
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
37
Page 38
Operating
Varytec Event Par IP65 4in1
14x8W WDMX (item number
452127)
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
38
LED PAR
Page 39
7.4 Functions in 4-channel DMX mode
Channel Value Function
1 0…255 Intensity red (0 % to 100 %)
2 0…255 Intensity green (0 % to 100 %)
3 0…255 Intensity blue (0 % to 100 %)
4 0…255 Intensity white (0 % to 100 %)
7.5 Functions in 7-channel DMX mode
Channel Value Function
1 0…255 Intensity red (0 % to 100 %)
2 0…255 Intensity green (0 % to 100 %)
Operating
3 0…255 Intensity blue (0 % to 100 %)
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
39
Page 40
Operating
Channel Value Function
4 0…255 Intensity white (0 % to 100 %)
5 0…255 Master dimmer (0 % bis 100 %)
6 0…10 open
11…255 Strobe eect, increasing speed
7 0…10 Without function
11…100 Colour change, increasing speed
101…200 Colour change with cross-fade, increasing speed
201…255 Sound control
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
40
LED PAR
Page 41
7.6 Functions in 9-channel DMX mode
Channel Value Function
1 0…255 Intensity red (0 % to 100 %)
2 0…255 Intensity green (0 % to 100 %)
3 0…255 Intensity blue (0 % to 100 %)
4 0…255 Intensity white (0 % to 100 %)
5 0…255 Master dimmer (0 % bis 100 %)
6 0…10 open
11…255 Strobe eect, increasing speed
7 0…10 Without function
11…32 Colour change with 7 colours
33…50 Colour change red orange
51…68 Colour change with 15 colours
Operating
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
41
Page 42
Operating
Channel Value Function
69…86 Colour change with blackout, 4 colours
87…100 Colour change with 15 colours
101…200 Colour change with cross-fade, increasing speed
201…255 Sound control
8 0…255 Colour change or fade programme speed if channel 7 = 11…200
9 0…14 No function
15…255 Sound control, increasing sensitivity
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
42
LED PAR
Page 43
7.7 Remote control
Operating
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
43
Page 44
Operating
10 [+], [–]
11 [R+G], [R+B], [R+W], [R+A], [A+B]
12 [BLACKOUT]
Increases or decreases the value set.
Activates the default colour schemes red/green, red/blue, red/white, amber/blue.
Activates the blackout function and deactivates it again.
[FULLON]
Activates all colours.
[AUTO]
Starts / stops "Automatic" mode.
[FADE]
Activates the fader.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
44
LED PAR
Page 45
[STROBE]
Starts or stops the ashing light function (strobe eect) with the last colour selected.
13 [Red], [Green], [Blue], [White], [Amber], [Purple]
Activates the colours red, green, blue, white, amber, purple.
Operating
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
45
Page 46
Technical specications
8 Technical specications
Item no. 435626 452127
Light source 14 × 4in1-RBGW-LED, 8 W each
Optical properties Beam angle 25°
Control DMX DMX
Number of DMX channels 4, 7, 9
Input connections Voltage supply Lockable Power Twist input socket TR1
Output connections Voltage supply Lockable Power Twist output socket
W-DMX
IR remote control IR remote control
IP65
DMX control XLR chassis-mounted socket (IP65), 3-
pin
TR1 IP65
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
46
LED PAR
Page 47
Technical specications
Item no. 435626 452127
DMX control XLR chassis-mounted coupling (IP65), 3-
pin
Power consumption 150 W
Supply voltage
Battery remote control Battery type Lithium button cell, 3 V, CR 2025
Degree of protection IP65
Mounting options Hanging, standing
Dimensions (W × H × D) 293 mm × 298 mm × 155 mm
Weight 4.8 kg
Ambient conditions Temperature range 0 °C…40 °C
Relative humidity 50 %, non-condensing
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
100 – 240 V 50/60 Hz
47
Page 48
Technical specications
Further information
Item no. 435626 452127
Design Outdoor housing Outdoor housing
Colour mixture RGBW RGBW
LED type x-in-1 x-in-1
Base housing Yes Yes
Fanless Yes Yes
Remote control Included Included
Wireless DMX No Yes
Housing colour Black Black
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
48
LED PAR
Page 49
9 Plug and connection assignments
Plug and connection assignments
Introduction
DMX connections
This chapter will help you select the right cables and plugs to connect your valuable equip‐
ment so that a perfect light experience is guaranteed.
Please take our tips, because especially in ‘Sound & Light’ caution is indicated: Even if a plug
ts into a socket, the result of an incorrect connection may be a destroyed DMX controller, a
short circuit or ‘just’ a not working light show!
The unit oers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please
refer to the drawing and table below for the pin assignment of a suitable XLR plug.
Pin Conguration
1 Ground, shielding
2 Signal inverted (DMX–, ‘cold signal’)
3 Signal (DMX+, ‘hot signal’)
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
49
Page 50
Troubleshooting
10 Troubleshooting
In the following we list a few common problems that may occur during operation. We give you
some suggestions for easy troubleshooting:
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
ers.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
50
LED PAR
Page 51
Symptom Remedy
Troubleshooting
The unit does not work, no
light.
No response to the DMX con‐
troller.
If the procedures recommended above do not succeed, please contact our Service Center. You
can nd the contact information at www.thomann.de.
Check the mains connection and the fuse.
1. Check the DMX ports and cables for proper connection.
2. Check the address settings and the DMX polarity.
3. Try using another DMX controller.
4. Check to see if the DMX cables run near or alongside to
high voltage cables that may cause damage or interfer‐
ence to DMX interface circuits.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
51
Page 52
Cleaning
11 Cleaning
Optical lenses
Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the
light output. The frequency of cleaning depends on the operating environment: wet, smoky or
particularly dirty surroundings can cause more accumulation of dirt on the optics of the
device.
n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122).
n Always dry the parts carefully.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
52
LED PAR
Page 53
12 Protecting the environment
Disposal of the packaging mate‐
rial
For the transport and protective packaging, environmentally friendly materials have been
chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose these materials with your normal household waste, but make sure that
they are fed to a recovery. Please follow the notes and markings on the packaging.
Disposal of batteries
Batteries must not be disposed of as domestic waste or thrown into re. Dispose of the bat‐
teries according to national or local regulations regarding hazardous waste. To protect the
environment, dispose of empty batteries at your retail store or at appropriate collection sites.
Protecting the environment
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR
53
Page 54
Protecting the environment
Disposal of your old device
This product is subject to the European Waste Electrical and Electronic Equipment Directive
(WEEE) in its currently valid version. Do not dispose with your normal household waste.
Dispose this device through an approved waste disposal rm or through your local waste
facility. When discarding the device, comply with the rules and regulations that apply in your
country. If in doubt, consult your local waste disposal facility.
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
54
LED PAR
Page 55
Page 56
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
Loading...