SR-2012, SR-2018, SR-2024, SR-2008
studio rack
assembly instructions
Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: info@thomann.de
Internet: www.thomann.de
04.12.2020, ID: 129416, 129418, 129419, 351448
Table of contents
Table of contents
1 Safety instructions.......................................................................................................................................................................................................... 4
2 Scope of delivery.............................................................................................................................................................................................................. 5
3 Installation.......................................................................................................................................................................................................................... 7
4 Technical specications............................................................................................................................................................................................. 12
5 Protecting the environment.................................................................................................................................................................................... 14
SR-2012, SR-2018, SR-2024, SR-2008
3
Safety instructions
1 Safety instructions
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children.
Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces
and choke!
Never let children play unattended with the product.
CAUTION!
Risk of injury to the hands
When assembling and screwing the individual parts, pay attention to sharp edges on tools, screws and components. Use only
suitable tools.
CAUTION!
Risk of injury due to heavy weight
Due to the heavy weight of the product, at least two persons are required for transport and assembly.
studio rack
4
2 Scope of delivery
Before you assemble your rack, make sure the contents of package is complete according to the following list.
19-inch studio sack Millenium SR-2012
n 1 × baseplate, steel sheet
n 1 × cover plate, steel sheet
n 2 × side panel, sheet steel with rack rails, guide rail for heavy duty angles and ventilation grilles
n 2 × caster
n 2 × caster with locking system
n 4 × height-adjustable stand
n 8 × Allen screw M6 × 20
n 8 × plastic cap
n 12 × heavy duty angle
n 12 × Allen screw M6 × 15
n 12 × nut for heavy duty angle
n 24 × cage nut M6
n 24 × Phillips screw M6 × 20
n 24 × plastic washer
n 1 × Allen wrench
n 1 × assembly instruction
Scope of delivery
19-inch studio rack Millenium SR-2018
n 1 × baseplate, steel sheet
n 1 × cover plate, steel sheet
n 2 × side panel, sheet steel with rack rails, guide rail for heavy duty angles and ventilation grilles
n 2 × caster
n 2 × caster with locking system
n 4 × height-adjustable stand
n 8 × Allen screw M6 × 20
n 8 × plastic cap
n 18 × heavy duty angle
n 18 × Allen screw M6 × 15
n 18 × nut for heavy duty angle
n 32 × cage nut M6
n 32 × Phillips screw M6 × 20
n 32 × plastic washer
n 1 × Allen wrench
n 1 × assembly instruction
SR-2012, SR-2018, SR-2024, SR-2008
5
Scope of delivery
19-inch studio rack Millenium SR-2024
n 1 × baseplate, steel sheet
n 1 × cover plate, steel sheet
n 2 × side panel, sheet steel with rack rails, guide rail for heavy duty angles and ventilation grilles
n 2 × caster
n 2 × caster with locking system
n 4 × height-adjustable stand
n 8 × Allen screw M6 × 20
n 8 × plastic cap
n 24 × heavy duty angle
n 24 × Allen screw M6 × 15
n 24 × nut for heavy duty angle
n 48 × cage nut M6
n 48 × Phillips screw M6 × 20
n 48 × plastic washer
n 1 × Allen wrench
n 1 × assembly instruction
19-inch studio rack Millenium SR-2008
n 1 × baseplate, steel sheet
n 1 × cover plate, steel sheet
n 2 × side panel, sheet steel with rack rails, guide rail for heavy duty angles and ventilation grilles
n 2 × caster
n 2 × caster with locking system
n 8 × Allen screw M6 × 20
n 8 × plastic cap
n 6 × heavy duty angle
n 6 × Allen screw M6 × 15
n 6 × nut for heavy duty angle
n 16 × cage nut M6
n 16 × Phillips screw M6 × 20
n 1 × two-piece crossbar
n 1 × Allen wrench
n 1 × assembly instruction
studio rack
6
Installation
3 Installation
Overview
The following gure provides an overview of the positioning of the individual components. In addition to the Allen key supplied,
you will need a suitable Phillips screwdriver and a soft pad for the assembly.
SR-2012, SR-2018, SR-2024, SR-2008
7
Installation
Assembly steps
1. Turn the baseplate (1) so that you can screw the two side panels (2) in the baseplate (1) with each two Allen screws
M6 × 20 (3) using the Allen key supplied.
Use a soft padding to prevent damage to the mounting or housing surface.
2. Place the assembled unit with the baseplate facing down on a suitable mounting surface. Use a soft padding to prevent
damage to the mounting or housing surface.
Screw the heavy duty angles (4), the M6 × 15 Allen screws (5) and the heavy duty angle nuts (6) in the guide rails of the side
panels using the Allen wrench as shown. Make sure that the heavy duty angle nut (6) is inside the guide rail.
studio rack
8
Installation
3. Place the cover plate (7) of the housing on the mounted unit and screw the cover plate in place with four Allen screws
M6 × 20 (3) in the two side panels using the provided Allen wrench.
4. Insert the four plastic caps (8) into the recesses on the cover plate.
SR-2012, SR-2018, SR-2024, SR-2008
9
Installation
5. Place the assembled unit with the cover plate facing down on a suitable mounting surface. Use a soft padding to prevent
damage to the mounting or housing surface.
Mount the two casters (10) and the two locking casters (9) or alternatively the four height-adjustable feet (11, not valid for
item no. 351448 Millenium SR-2008) to the base plate.
Only valid for item no. 351448 Millenium SR-2008
6. Position the assembled unit with the rollers facing down.
Mount the crossbar (12) with four Phillips screws M6 × 20 (13) and four cage nuts M6 (14) with a Phillips screwdriver in the
rack rails of the side panels as shown.
10
studio rack
Installation
7. To install the equipment into the studio rack, screw it in the rack rails with a Phillips screwdriver using the Phillips screws
M6 × 20 (13), M6 cage nuts (14), and plastic washers (15, not valid for item no. 351448 Millenium SR-2008) as illustrated.
SR-2012, SR-2018, SR-2024, SR-2008
11
Technical specications
4 Technical specications
19-inch studio rack SR-2012
Construction type Solid sheet steel construction with rack rails, guide rail for heavy duty
angles and ventilation grilles
Item no. 129416
Installation width 19 inch
Rack units (RU) 12
Installation depth max. 400 mm
Power handling max. 50 kg
Dimensions (W × H × D) 560 mm × 640 mm × 460 mm
Weight 16.8 kg
19-inch studio rack SR-2018
Construction type Solid sheet steel construction with rack rails, guide rail for heavy duty
angles and ventilation grilles
Item no. 129418
Installation width 19 inch
Rack units (RU) 18
Installation depth max. 400 mm
Power handling max. 60 kg
Dimensions (W × H × D) 560 mm × 910 mm × 460 mm
Weight 20.5 kg
12
studio rack
Technical specications
19-inch studio rack SR-2024
Construction type Solid sheet steel construction with rack rails, guide rail for heavy duty
angles and ventilation grilles
Item no. 129419
Installation width 19 inch
Rack units (RU) 24
Installation depth max. 400 mm
Power handling max. 80 kg
Dimensions (W × H × D) 560 mm × 1200 mm × 460 mm
Weight 31 kg
19-inch studio rack SR-2008
Construction type Solid sheet steel construction with rack rails, guide rail for heavy duty
angles and ventilation grilles
Item no. 351448
Installation width 19 inch
Rack units (RU) 8
Installation depth max. 400 mm
Power handling max. 50 kg
Dimensions (W × H × D) 560 mm × 480 mm × 4650 mm
Weight 15.4 kg
SR-2012, SR-2018, SR-2024, SR-2008
13
Protecting the environment
5 Protecting the environment
Disposal of the packaging material
For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal
recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling.
Please follow the notes and markings on the packaging.
14
studio rack
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
Loading...