Thomann MIX 1202FX, MIX 802, MIX 502 User Manual
mix 502, mix 802,
mix 1202FX
mixer
user manual
Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: info@thomann.de
Internet: www.thomann.de
08.02.2019, ID: 370662, 370664, 370666 (V3)
Table of contents
Table of contents
1 General information................................................................................................................................. 4
1.1 Further information........................................................................................................................... 5
1.2 Notational conventions.................................................................................................................... 6
1.3 Symbols and signal words............................................................................................................... 6
2 Safety instructions..................................................................................................................................... 8
3 Features....................................................................................................................................................... 12
4 Installation and starting up................................................................................................................ 15
5 Connections and controls................................................................................................................... 16
6 Technical specications....................................................................................................................... 40
7 Plug and connection assignment.................................................................................................... 45
8 Protecting the environment.............................................................................................................. 49
mix 502, mix 802, mix 1202FX
3
General information
1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
mixer
4
1.1 Further information
General information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search
Online guides
Personal consultation For personal consultation please contact our technical hotline.
Service
Use the search function in the electronic version to nd the topics of
interest for you quickly.
Our online guides provide detailed information on technical basics
and terms.
If you have any problems with the device the customer service will
gladly assist you.
mix 502, mix 802, mix 1202FX
5
General information
1.2 Notational conventions
This manual uses the following notational conventions:
Letterings
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
6
mixer
General information
Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
CAUTION! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in minor injury if it
is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – danger zone.
mix 502, mix 802, mix 1202FX
7
Safety instructions
2 Safety instructions
Intended use
8
This device is intended to be used for amplication, mixing and playback of signals from
musical instruments and microphones. Use the device only as described in this user manual.
Any other use or use under other operating conditions is considered to be improper and may
result in personal injury or property damage. No liability will be assumed for damages resulting
from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
mixer
Safety
Safety instructions
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
mix 502, mix 802, mix 1202FX
9
Safety instructions
CAUTION!
Possible hearing damage
With loudspeakers or headphones connected, the device can produce volume
levels that may cause temporary or permanent hearing impairment.
Do not operate the device permanently at a high volume level. Decrease the
volume level immediately if you experience ringing in your ears or hearing
impairment.
NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
10
mixer
Safety instructions
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
NOTICE!
External power supply
The device is powered by an external power supply. Before connecting the
external power supply, ensure that the input voltage (AC outlet) matches the
voltage rating of the device and that the AC outlet is protected by a residual cur‐
rent circuit breaker. Failure to do so could result in damage to the device and pos‐
sibly the user.
Unplug the external power supply before electrical storms occur and when the
device is unused for long periods of time to reduce the risk of electric shock or
re.
mix 502, mix 802, mix 1202FX
11
Features
3 Features
mix 502
12
n 5-channel mixer
n 1 × mono input (MIC, line)
n 2 × stereo input (line)
n 1 × master output (stereo)
n 1 × stereo RCA audio input
n 1 × stereo RCA audio output
n 2-band equalizer (mono channel)
n Pan control
n 48 V phantom power
n Headphones output separately adjustable
n Suitable power supply included
mixer
Features
mix 802
n 8-channel mixer
n 4 × mono input (MIC, line)
n 2 × stereo input (line)
n 1 × master output (stereo)
n 1 × control room output
n 1 × stereo RCA audio input
n 1 × stereo RCA audio output
n 3-band equalizer
n Pan control
n 48 V phantom power
n Headphones output separately adjustable
n Suitable power supply included
mix 502, mix 802, mix 1202FX
13
Features
mix 1202fx
n 12-channel FX mixer
n 4 × mono input (MIC, line)
n 4 × stereo input (line)
n 1 × master output (stereo)
n 1 × control room output
n 1 × stereo RCA audio input
n 1 × stereo RCA audio output
n 3-band equalizer
n Pan control
n 48 V phantom power
n Headphones output separately adjustable
n Suitable power supply included
mixer
14
4 Installation and starting up
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
Only use the supplied power adapter. The connector for the power supply is located on the
rear panel.
The device has no main switch. Supply voltage is available as soon as you connect the device
to the power grid via the power supply.
Before connecting the supply voltage and before connecting or disconnecting audio cables,
set all volume controls of the unit to zero to avoid damage to the connected speakers and
devices.
Installation and starting up
mix 502, mix 802, mix 1202FX
15
Connections and controls
5 Connections and controls
mix 502 – overview
16
mixer
Loading...