6Protecting the environment.............................................................................................................. 13
BS-2211B MKII Set
3
Page 4
General notes
1
General notes
This user manual contains important information on the safe operation of the product. Read
and follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this product. If you sell the product to another user, be
sure that they also receive this manual.
Our products are subject to a process of continuous development. We therefore reserve the
right to make changes without notice.
This section provides an overview of the symbols and signal words used in this user manual.Symbols and signal words
speaker stand
4
Page 5
General notes
Signal wordMeaning
DANGER!This combination of symbol and signal word
indicates an immediate dangerous situation
that will result in death or serious injury if it is
not avoided.
CAUTION!This combination of symbol and signal word
indicates a possible dangerous situation that
can result in minor injury if it is not avoided.
NOTICE!This combination of symbol and signal word
indicates a possible dangerous situation that
can result in material and environmental
damage if it is not avoided.
Warning signsType of danger
Warning – danger zone.
BS-2211B MKII Set
5
Page 6
Safety notes
2
Intended use
Safety
Safety notes
This speaker stand is used for stable fixing and height-adjustable installation of loudspeaker
cabinets. Use the product only as described in this user manual. Any other use or use under
other operating conditions is considered to be improper and may result in personal injury or
property damage. No liability will be assumed for damages resulting from improper use.
This product may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
product only if they are supervised or instructed by a person who is responsible for their safety.
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are properly disposed of and are not in
the reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the product. They could swallow the pieces and choke!
Never let children play unattended with the product.
speaker stand
6
Page 7
Features
3
Features
Special features:
n 2 pcs. set including carrying bag
n Elegant all metal construction
n Extendable up to 2 m
n Up to 30 kg centrically loadable
n 35 mm pipe diameter at the tripod flange
n Transport length when folded: 1.12 m
BS-2211B MKII Set
7
Page 8
Operating
4
Operating
Unpack and check carefully there is no transportation damage before using the product. Keep
the equipment packaging. To fully protect the product against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
CAUTION!
Danger of tipping on unsuitable surfaces
When the speaker stand is installed on soft or uneven ground, the stand may tip
over and cause injuries and property damage.
Install the stand only on even and solid surfaces.
speaker stand
8
Page 9
Operating
CAUTION!
Danger of tipping when transported under load
If the stand is moved without having removed the installed device, the stand may
tip over and cause injuries and property damage.
Remove the installed device before transporting the stand.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC floor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad
floor protectors or a carpet.
BS-2211B MKII Set
9
Page 10
Operating
Positioning
Carry out the steps described below for both tripods:
1.Unfold the legs of the tripod until the cross braces are in a horizontal position.
2.Fix this position with the safety bolt on the carriage to which the three feet are attached.
3.Pull out the safety pin and loosen the safety bolt on the extension tube.
4.Pull out the extension tube to the desired height and insert the safety pin through the
appropriate grid holes.
5.Fix the position of the extension tube with the safety bolt on the extension tube.
6.Flange the speaker on top of the extension tube. The weight of the speaker to be set up
must not exceed the maximum centric load of 30 kg.
speaker stand
10
Page 11
Operating
Dismounting
1.Remove the speaker.
2.Pull out the safety pin and hold the extension tube while you loosen the safety bolt on
the extension tube.
3.Slide the extension tube all the way down and slide the safety pin through the appro‐
priate grid holes.
4.Fix the position of the extension tube with the safety bolt on the extension tube.
5.Loosen the screw on the carriage to which the three feet are attached.
6.Fold up the legs of the tripod.
BS-2211B MKII Set
11
Page 12
Technical specifications
5
Permissible centric loadability2 × 30 kg
Minimum lift height2 × 1300 mm
Maximum lift height2 × 2000 mm
Tripod flange2 × 35 mm diameter
Weight2 × 2.16 kg
Transport length when folded2 × 112 cm
ColourBlack
Technical specifications
speaker stand
12
Page 13
Protecting the environment
6
Disposal of the packaging mate‐
rial
Protecting the environment
For the transport and protective packaging, environmentally friendly materials have been
chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that
they are collected for recycling. Please follow the notes and markings on the packaging.