6Protecting the environment.............................................................................................................. 17
BS-2211B MKII Set
3
Page 4
General information
1 General information
This manual contains important instructions for the safe operation of the product. Read and
follow the safety instructions and all other instructions. Keep the manual for future reference.
Make sure that it is available to all those using the product. If you sell the product to another
user, be sure that they also receive this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change. Please refer to the latest version of the user manual which is ready for download
under www.thomann.de.
Symbols and signal words
4
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
speaker stand
Page 5
General information
Signal wordMeaning
DANGER!This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
CAUTION!This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in minor injury if it
is not avoided.
NOTICE!This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signsType of danger
Warning – danger zone.
BS-2211B MKII Set
5
Page 6
Safety notes
2 Safety notes
Intended use
6
This speaker stand is used for stable xing and height-adjustable installation of loudspeaker
cabinets. Use the product only as described in this user manual. Any other use or use under
other operating conditions is considered to be improper and may result in personal injury or
property damage. No liability will be assumed for damages resulting from improper use.
This product may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
product only if they are supervised or instructed by a person who is responsible for their safety.
speaker stand
Page 7
Safety
Safety notes
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are properly disposed of and are not in
the reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the product. They could swallow the pieces and choke!
Never let children play unattended with the product.
CAUTION!
Danger of tipping when transported under load
If the stand is moved without having removed the installed device, the stand may
tip over and cause injuries and property damage.
Remove the installed device before transporting the stand.
BS-2211B MKII Set
7
Page 8
Safety notes
CAUTION!
Danger of tipping on unsuitable surfaces
When the speaker stand is installed on soft or uneven ground, the stand may tip
over and cause injuries and property damage.
Install the stand only on even and solid surfaces.
CAUTION!
Danger of tipping due to overload
In case of overload, the stand may tip over and cause injuries and property
damage.
Never exceed the maximum load capacity specied for the stand.
speaker stand
8
Page 9
3 Features
Features
Special features:
n 2 pcs. set including carrying bag
n Elegant all metal construction
n Extendable up to 2 m
n Up to 30 kg centrically loadable
n 35 mm pipe diameter at the tripod ange
n Transport length when folded: 1.12 m
BS-2211B MKII Set
9
Page 10
Operating
4 Operating
Unpack and check carefully there is no transportation damage before using the product. Keep
the equipment packaging. To fully protect the product against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
CAUTION!
Danger of tipping when transported under load
If the stand is moved without having removed the installed device, the stand may
tip over and cause injuries and property damage.
Remove the installed device before transporting the stand.
10
speaker stand
Page 11
Operating
CAUTION!
Danger of tipping on unsuitable surfaces
When the speaker stand is installed on soft or uneven ground, the stand may tip
over and cause injuries and property damage.
Install the stand only on even and solid surfaces.
CAUTION!
Danger of tipping due to overload
In case of overload, the stand may tip over and cause injuries and property
damage.
Never exceed the maximum load capacity specied for the stand.
BS-2211B MKII Set
11
Page 12
Operating
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC oor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad
oor protectors or a carpet.
Comply with regulations
When installing and operating, make sure to follow the standards and regulations
that apply in your country.
12
speaker stand
Page 13
Operating
Setting up
Follow the procedure described below for each of both stands:
1.Unfold the feet of the stand until the cross braces are in a horizontal position.
2.Fix this position with the safety screw on the slider to which the three feet are attached.
3.Pull out the safety cotter and loosen the locking screw on the extension tube.
4.Pull out the extension tube to the desired height and slide the safety cotter through the
corresponding grid hole.
5.Fix the position of the extension tube with the safety bolt on the extension tube.
6.Flange the speaker box on top of the extension tube. The weight of the speaker box to
be set up must not exceed the maximum centric load of 30 kg.
BS-2211B MKII Set
13
Page 14
Operating
Dismounting
1.Remove the speaker box.
2.Pull out the safety cotter and hold the extension tube while you loosen the locking
screw on the extension tube.
3.Slide the extension tube all the way down and slide the safety cotter through the corre‐
sponding grid hole.
4.Fix the position of the extension tube with the safety bolt on the extension tube.
5.Loosen the safety screw on the slider to which the three feet are attached.
6.Fold up the feet of the stand.
speaker stand
14
Page 15
5 Technical specications
Height, max.2 × 2.00 m
Adjustable stand height2 × 1.25 m … 2.00 m
Technical specications
Stand footprint
Truss length2 × 1042 mm
Stand tube diameter
Truss tube diameter
Mounting options
Max. load capacity (for centric load)2 × 30 kg
Transport dimensions (W × H × D)250 mm × 1150 mm × 120 mm
Weight2 × 2.16 kg
ColourBlack
2 × Æ 775 mm
Æ 35 mm
Æ 38 mm
Flange, 2 × Æ 35 mm
BS-2211B MKII Set
15
Page 16
Technical specications
Further information
Set of 2 standsYes
Speaker ange35 mm
MaterialAluminium
Crank standNo
RinglockNo
PneumaticsNo
Foot typeTripod
16
speaker stand
Page 17
6 Protecting the environment
Disposal of the packaging mate‐
rial
For the transport and protective packaging, environmentally friendly materials have been
chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that
they are collected for recycling. Please follow the notes and markings on the packaging.