THIS END UP FURNITURE Classic Small Dining Room Table, Classic Medium Dining Room Table, Classic Large Dining Room Table Assembly Instructions Manual

THIS END UP FURNITURE CO.

P.O. Box 5410, Sanford, North Carolina 27331

[phone] [phone] Fax [phone] www.thisendup.com

June 2015

Classic Dining Room Table Assembly Instructions

Small and Medium Dining Room Table

Pages 2

Large Dining Room Table

Pages 3

Dining Room Table Assembly Instructions

DAE

B

C

F

G

H

BRACKET

LEVELER

Tools Needed

1-9/16” Wrench or Socket and Ratchet
1-Flat Head Screwdriver

Parts Included

A-Table Top (1)
B-Table Leg (2)
C-Center Board (1)

Hardware Kit

D-5” Lag Bolt (4)
E-Flat Washer (4)
F-4-1/2” Machine Bolt (4)
G-1/4” Flat Washer (4)
H-Wing Nut (4)

ASSEMBLY INSTRUCTIONS

1. Place table top (A) face down on floor.

2. To assemble base, attach legs (B) to centerboard (C) using (4) 5" lag bolts
(D) and (4) washers (E). Do not tighten lag bolts completely.

3. Lower base upside down onto top (A).

4. Line up holes in base with holes in brackets on the underside of table top (A).

5. Attach using (4) machine bolts (F) with (8) washers (G) and (4) wing nuts
(H). Make sure nuts are tight. **NOTE: MAKE SURE UPPER CROSS-

MEMBERS OF LEGS (B) ARE TIGHT AGAINST THE UNDERSIDE OF
TOP (A).

6. Fully tighten lag bolts (D).

7. Turn table into upright position. **NOTE: IF TABLE ROCKS, THERE ARE
LEVELERS ON THE BOTTOM OF THE BASE. THESE CAN BE UN­SCREWED BY HAND TO LEVEL THE TABLE

THIS END UP FURNITURE CO.

P.O. Box 5410 Sanford, North Carolina 27331

[phone] [phone] Fax [phone] www.thisendup.com

June 2015

D

E

F

G

H