Think Wireless TWDBMPSB-01 Installation And Operation Manual

Dual Band Mobile Phone Signal Booster

INSTALLATION AND OPERATION MANUAL

P/N: TWDBMPSB-01

- 1 -

INSTALLATION AND OPERATION MANUAL

1. Package Contents………………………………………………………. 3

2. Important Safety Information…………………………………………… 3

a. Limited Warranty……………………………………………. 4
b. Limitation on Liability...…………………………………….. 4
c. FCC Regulations..…………………………………………… 4

3. Pre-installation Guidelines……………………………………………… 4

a. Installation Tools……………………………………………. 4
b. Installation Procedure……………………………………….. 4
c. Electrical Power………………………………………………6
d. Amplifier/Repeater Status……………………………………6
e. In-building Coverage Problems………………………………6
f. Coaxial Cable Recommendations……………………………. 6

4. Home/Office Installation…………………………………………...….… 7

5. Specifications…………………………………………….…………….... 7

6. Antenna & Accessory Options…………………………………….…….. 8

7. Technical Support………………………………………………………... 8

- 2 -

--------------------IMPORTANT--------------------

Part Number

Description

TWDBMPSB-01

Dual Band Mobile Phone Signal Booster

ANTDBSUS-01

Inside omni-directional dual band stick antenna

ANTDBHUS-01

Indoor/Outdoor omni-directional 5dBi dual band helix antenna

ADREPUS-01

110-240 VAC to 5 VDC power supply

CBLREP-50

50' RG-6 satellite TV low loss cable (optional)

ANTDBPUS-01

Indoor/Outdoor directional 8/11dBi dual band panel antenna (optional)

Read instructions completely before installation!

1. Package Contents

2. Important Safety Information

The TWDBMPSB-01 system complies with all FCC, IC, UL rules, regulations and codes.
Follow all guidelines in the installation and instruction manual and read completely
before beginning the installation procedure. Do not deviate or disregard any of the safety
features included in the manual or with the equipment, nor operate the system in an
unintended application.

WARNING!

Only Think Wireless, Inc. authorized products may be used with the
TWDBMPSB-01 system. Using unauthorized equipment with the
TWDBMPSB-01 system will harm the system, voids the warranty and can be
detected in the event of a failure.

WARNING!

Do not install antenna near power lines. Contact with any high voltage
power lines could result in shock or loss of life.

WARNING!

Handle all electronic parts with care. Dropping or mishandling the
TWDBMPSB-01 amplifier/repeater, antennas or power supplies can damage
sensitive RF and electronic components.

- 3 -