Think Tank Photo 886 User manual

Product Description: Digital Holster™ Harness V2.0

Stay Hands-free and Keep a Digital Holster in Easy Reach

For more information please visit: www.thinktankphoto.com

Product Description:

The new and improved Digital Holster Harness V2.0 highlights the in­novative designs Think Tank Photo has become known for. Some chest­mounted bags tend to sag or shift weight on very active photographers.
The Digital Holster Harness V2.0 has six attachment points to each Digi­tal Holster V2.0 to keep the holster snug against a photographer’s chest.
Photographers can keep their hands free for hiking, cycling, or skiing until
they are ready to capture that peak action moment.

Key Features:

• Keeps a Digital Holster V2.0 snug against the chest

5

4

• Designed to keep bag stationary during extreme body movements

• Compatible with all Digital Holster V2.0 sizes

• Mesh back for ventilation and comfort

• Webbing End Roll-ups keep excess webbing slack neatly wrapped

• Fully adjustable, one size ts most

• Rugged straps and durable hardware

• “No Rhetoric” lifetime warranty

Specications

SKU: 87453000 886 3 • Part Number: 886

• One size ts all

• WEIGHT: 10.7 oz (302 g)

3

2

1

(Digital Holster 20 V2.0

shown, sold separately)

1. Webbing End Roll-up

2. Fully adjustable straps

3. Middle strap with bungee ring stabilizes bag

3636 North Laughlin Road, Suite #170, Santa Rosa, CA 95403 Phone #: [phone] FAX #: [phone]

4. Durable metal hardware

5. Lightweight and supportive harness

Product Description: Digital Holster™ Harness V2.0

Stay Hands-free and Keep a Digital Holster in Easy Reach

For more information please visit: www.thinktankphoto.com

Rear view of the Digital Holster Harness V2.0. The wide, mesh back distributes weight evenly while venti­lating for comfort.

Next, connect the middle straps to the small upper webbing loops on the back of the Digital Holster V2.0.
Note that the middle straps have a heavy duty elastic ring near the back. The elastic rings are what keep
the Digital Holster snug against the torso. Lightly adjust length of the middle straps

To attach the Digital Holster Harness V2.0 to any size Digital Holster V2.0, rst connect the shoulder straps
to the metal D-rings at the top of the Digital Holster. Adjust the two shoulder straps as needed, estimating
a comfortable height on the torso to wear the Digital Holster.

Connect the waist straps to the small lower webbing loops near the bottom of the Digital Holster V2.0. Fi­nally adjust all the straps for a proper t. The middle and waist straps feature “Webbing End Roll-ups” that
allow excess webbing to be rolled up then wrapped with hook-and-loop aps so they stay out of the way.

3636 North Laughlin Road, Suite #170, Santa Rosa, CA 95403 Phone #: [phone] FAX #: [phone]