![](/html/63/6338/6338edefd043011683d4f87892fc3a6ad724a5ce34c0b93cdcfddd406f370992/bg1.png)
Dear Photographer,
Airport Security
You have just purchased the Airport Security, Think Tank Photo’s state-of-the-art roller that combines the best of
field mobility with airline travel requirements! Many unique features are combined in the Airport Security. We invite
you to examine the roller carefully for you will soon discover new ways that it can be adapted to fit your specific
style of shooting and transportation needs.
If you have any questions, feel free to contact us at CustomerService@ThinkTankPhoto.com.
Cheers!
Setting the TSA Combination Lock
Step 1:
push the ends of the sliders HARD into
the slots.
Step 4:
combination. REMEMBER your new
combination!
To LOCK the main compartment,
SET the numbers to your desired
Step 2:
set your combination then push the end
buttons INWARD.
Step 5:
until you hear a “click.” Your new
combination is now active.
Back Security Cable and Lock
To UNLOCK the main compartment,
PUSH both ends inward HARD
Step 3:
from the factory at 0 0 0.
To CHANGE the combination, there is a hole
on the side of the lock. Push the button IN
with a pen until you hear a “click.”
TSA (Transportation Security Authorization)
lock allows for Airport Personnel to access
your bag. Think Tank Photo does not
recommend gate-checking your gear, but
there may be situations where airport
personnel requires entry. Please note that
there is no individual key for this bag.
The lock’s combination is pre set
Step 1: A security cable and lock are
located inside the back zipper pocket.
1
Step 2:
the bag to immovable objects.
This cable may be used to secure
www.thinkta nkphoto.com
Step 3: Lock is currently set to 0 0 0. To reset lock,
pull the shackle and turn it 90º counterclockwise
to align with notch on lock body. Press down, and
turn an additional 90º counterclockwise. Reset the
combination. Return lock to current position.
![](/html/63/6338/6338edefd043011683d4f87892fc3a6ad724a5ce34c0b93cdcfddd406f370992/bg2.png)
Front Security Cable and Lock
Step 1: An additional security cable and
lock are located in the front pocket.
Step 2:
laptop case, such as the Artificial Intelligence
15 or 17, to the Airport Security.
This cable may be used to secure a
Removable Emergency Shoulder Harness
Step 1: The removable “emergency”
shoulder straps will allow you to temporarily
transport your gear in situations where
you cannot roll the bag. (This roller is not
designed to be used as a backpack on a
regular basis).
Step 2:
of the shoulder straps connect to the D rings
on the sides of the bag. The length of the
shoulder straps can be adjusted with the
buckle.
The metal snaphook on the bottom
Step 3: Lock is currently set to 0 0 0. To
reset lock, use a pen to press in small
release button on side of lock. (As shown
above.) While pressing, change your
combination. Once you release, your new
combination will be set.
Step 3:
removed by unthreading the webbing
through the metal buckle.
The shoulder straps can be
Step 4:
put the webbing completely through the
buckle.
To reattach the shoulder straps,
Step 5:
threaded all the way through the buckle.
Make sure the webbing is back
Airport Security is Compatible with...
Artificial Intelligence 15 or 17 laptop
cases can fit inside the front pocket.
Airport Security Low Divider Set may be
used to store laptop inside of the bag.
The Airport Check In briefcase is the
perfect addition to the Security and slides
onto the handle.