Think Tank Streetwalker User Manual

StreetWalker® Backpack V2.0 Instructions

For more information please visit: www.thinktankphoto.com

ADJUSTABLE STERNUM STRAP

The sternum strap adjusts up and down along
the blue rails on the backpack straps.

TRIPOD OR MONOPOD ATTACHMENT

REMOVABLE WAISTBELT

The included waistbelt is removable by unthreading
the webbing through the buckle.

ATTACH A MODULAR BELT

Remove the StreetWalker waistbelt. Pass a Think
Tank Photo Pro Speed Belt™ or Thin Skin™ Belt
(sold separately) into place for additional comfort or
to be used with the Think Tank Modular Belt system.

Step 1: Locate the two adjustable tripod straps
provided with the StreetWalker.

1105 N. Dutton Avenue, Suite C, Santa Rosa, CA 95401 USA Phone #: [phone] FAX #: [phone]

Step 2: To open the Double Gatekeeper buckle,
press the gate inwards then depress the top plastic
bar in order to release the gate.

Step 3: Slide the opened Double Gatekeeper buckle
through the webbing loop and close it by depressing
the top plastic bar and securing the gate.

Step 4: Attach the tripod straps to the webbing
loops at the top and near the bottom of the
StreetWalker.

©2016 Think Tank Photo PIN0036a

StreetWalker® Backpack V2.0 Instructions

For more information please visit: www.thinktankphoto.com

USING THE TRIPOD CUPCARRYING A TRIPOD

Step1: Insert two tripod legs into the outside lower

pocket.

Step 2: Unlock the adjustable strap, then pull the
strap tight around the top of the tripod. Tighten the
lower strap around the exposed leg for additional
stability.

Step 1: Locate the blue tab with the tripod icon
near the bottom of the StreetWalker Pro and
StreetWalker HardDrive.

Step 2: Pull tab downward to deploy the tripod cup.
Use the included tripod straps to secure the tripod
onto the backpack.

1105 N. Dutton Avenue, Suite C, Santa Rosa, CA 95401 USA Phone #: [phone] FAX #: [phone]