Thinicon EHB Series, EHC Series, EHB1020, EHB1025, EHC1030 User Manual

EHB/C Manual TH211118ER1 THINICON

1 Introduction：

EHB/EHC water-jacket heater is consists of heating element and temperature switches, is suitable

for all water-cooled engines. After installed heater, the engine starting ability will upgrade, reducing
startup losses, reduce wear and save fuel. Feature：

l Computer thermostatic control
l Set any temperature at the scene
l Digital display temperature and LED indicator shows the working status
l The operation panel to open/stop heating
l Precision die-cast aluminum water jacket case.
l Additional rubber sleeve to reduce thermal losses

2 Shape and installation dimensions:

EHB

EHC

1

EHB/C Manual TH211118ER1 THINICON

3 Wiring and electrical schematics：

4 Installation

Installed correctly is very important for the normal work of the heater, otherwise it will damage the

heater.

Position：

l Mounting feet horizontal installation.
l Isolation the engine vibration.
l The heater water-jacket is setting in low position as far as possible below the engine cooling fluid.

Electrical connections：

l Refer to the above wiring diagram.
l Must provide the good ground to ensure that the heater effectively grounding protection.
l User according to the power of the heater, select the appropriate main power circuit breaker to

ensure the effective heater overcurrent protection.

Warning：

l Heater installation and maintenance must be disconnected from the main

power supply.

l Must be installed and maintained by qualified engineers.
l During transport and parking, if the ambient temperature causes the

coolant in the heater water jacket to solidify, the maintenance drain must
be drained prior to use.

2