The Whistler Group WH08 Users manual

OWNER’S MANUAL
1785A
LASER/RADAR DETECTOR
THE WHISTLER GROUP CORPORATE HEADQUARTERS
13016 N. Walton Blvd. Bentonville, AR 72712 USA TEL (479) 273-6012 FX (479) 273-2927 www.whistlergroup.com
CUSTOMER RETURN CENTER
1201 N. Dixieland Rd. Rogers, AR 72756 Customer Service Tel (800) 531-0004 Email: info@whistlergroup.com
P/N 1785AMAN/Rev2, © WHISTLER 2002
If you have questions concerning the operation of this Whistler product please call consumer relations:
1-800-531-0004
Hours:
Monday - Friday
8:00 am - 5:00 pm CT
or visit www.whistlergroup.com
Please keep the receipt in a safe place. If the unit is returned without a dated store receipt an out of warran­ty service charge applies. Note: Your warranty period begins at the time of purchase. The warranty is validated only by a copy of the original store receipt. Now is the time to record the serial number of the unit in the space provided in the warranty section of the manual.
INTRODUCTION
Dear Whistler Owner, For many of us, a vehicle is more than just transportation. It
can be a mobile office, communications or entertainment center, or simply an expression of our personality. Whistler products are designed to make the time you spend in your vehicle more productive, more fulfilling, safer, or just simply more fun. Our mission is to provide products that improve your driving experience.
Your new Whistler 1785A laser/radar detector detects all radar, laser and safety radar systems, plus offers Whistler’s exclusive Safe Driving System™ with Digital Compass, Real Voice™ technology and Vehicle Battery Saver Features. The comprehensive safety system detects all safety radar includ­ing the Safety Warning System™ keeping you informed of road hazards and adverse weather. Plus, Whistler’s unique Stay Alert™ feature tests driver’s alertness on long solo trips. Whistler’s 1785A also offers a digital display with safety mes­sages to keep you informed while you drive and a digital compass feature that shows your direction of travel.
NOTE: Compass must be calibrated before use! See “Compass Calibration Set-up” section.
To fully acquaint yourself with the operation of the Whistler 1785A and to better understand the differences between detecting radar, laser and safety radar signals, we recom­mend reading this entire manual.
Enjoy the Whistler 1785A and please drive safely.
Sincerely,
THE WHISTLER GROUP
WHISTLER FEATURES
Whistler’s ergonomic and user-friendly design provides a new level of operating convenience. Special features include:
1. Bracket Release Button – Provides quick and easy release of the mounting bracket.
2. Power Jack – Provides connection for the power cord.
3. Speaker – Provides distinct audio and Real Voice™
warnings for X, K, Ka band radar, safety radar, laser and VG-2.
4. Power/Dim/Dark Button – Turns unit on/off and engages Dim/Dark modes (press and hold for 2 seconds).
5. Volume Up/Down Buttons – Adjust volume up or down. Pressing both buttons enter compass calibration mode.
3
Topic Page
Model Features Summary....................................................3 - 5
Installation .............................................................................6 - 9
• Mounting Guidelines
• Visor/Windshield Mounting
• Power Connection And Fuse Replacement
• Compass Calibration Set-up
Operation.............................................................................10-17
• Power On And Self-Test
• Integrated Real Voice™
• Feature Engaged Confirmation
• Auto Level Adjustment
• Compass Mode
• Auto Quiet/Quiet Modes
• City Mode
• Dim/Dark Mode
• Engaging/Disengaging VG-2 Detection
• Stay Alert
• Option Select Mode
• Teach/Tutorial Mode
• Vehicle Battery Saver Mode
Radar, Laser And VG-2 Alerts.............................................18-22
• Radar Alerts
• Pulse Protection®
• Safety Radar Audio/Visual Alerts
• Laser Audio/Visual Alerts
• VG-2 Audio/Visual Alerts
• Alert Priority
• Reset Features
• Care and Maintenance
Troubleshooting Guide............................................................23
Are Detectors Legal? ...............................................................24
Speed Monitoring Technologies .....................................25 - 26
• Radar Facts
• Laser Facts
• Other Speed Detection Systems
• Radar Detector Detectors
Warranty Information........................................................27 - 29
Specifications............................................................................30
Accessories ...............................................................................31
TABLE OF CONTENTS
Whistler 1785A
10
1
2
3
4
5
9
6
7
8
Accessory Order Form.............................................................32
WHISTLER FEATURES
Accessories
Accessories included are highly functional and easy to use.
Power Cord - Connects to the unit’s power jack and your vehicle’s lighter socket.
Windshield Bracket - Allows installation of unit on your vehicle’s windshield.
5
WHISTLER FEATURES
6. High Visibility Display – Provides distinct visual confir-
mation of signals detected, signal strength, and indicates engaged modes of operation.
7. Quiet/Menu Button - Pressing QUIET before a signal is detected engages Auto Quiet Mode which automatically reduces the audio level after the initial warning to a low audio level setting. Pressing QUIET during a radar/laser encounter silences audio alerts, while allowing visual alerts to keep you informed. Pressing and holding for 2 seconds allows you to enter Option Select Mode (see page 16).
8. CITY/CITY 1/CITY 2 Button - Reduces the annoyance of false alerts typically encountered in urban driving areas.
9. Mode Button - Switches between Combo, Radar, Compass only modes. See page 11.
10. Laser Antenna (Rear) - An integrated optical waveguide provides superior detection of laser signals transmitted from behind.
11. Laser Antenna (Front) - High gain optical lens provides increased sensitivity and field of view for leading­edge laser detection.
12. Radar Antenna - Compact, high-efficiency antenna receives radar signals.
13. Mounting Bracket Location - Slot holds mounting bracket firmly.
4
12
13
11
Slide the detector onto the bracket until it locks into place.
• If necessary, the unit may be leveled by bending the wind-
shield bracket. Press the bracket release button and remove the detector before bending.
INSTALLATION
7
INSTALLATION
Mounting Guidelines
Mount the unit as low and level as possible near the center of the windshield. Unit must be level for compass to func-
tion properly.
Do not mount your unit behind wipers, ornaments, mirrored sunscreens, etc. These obstructions have metal surfaces which can affect radar and laser signals and reduce critical warning time. (Regular tinted glass does not affect reception.)
Some windshields have an Instaclear
or Electriclear™ type coating, which affect radar signals. Consult your dealer or the owner’s manual supplied with your vehicle to determine if your windshield has this coating.
Avoid placing unit in direct contact with windshield.
To reduce the possibility of theft, conceal your unit when not
in use.
Windshield Mounting
Install the two suction cups and rubber bumper onto the bracket by fitting them into their holes.
Press the suction cups onto the windshield at the location you have chosen. IMPORTANT: Some newer cars have a
plastic safety coating on the inside of the windshield. The suction cups may leave permanent marks on this type of surface. To find out if your vehicle has this type of wind­shield, check the owner’s manual or ask your dealer. We recommend that you do not leave the suction cup bracket on the window in direct sunlight. If the detector is removed, this may cause blistering of the dash in some vehicles.
6
INSTALLATION
9
INSTALLATION
Visor Mounting (optional accessory)
• Slide the visor bracket into the bracket mounting slot.
• Clip the visor bracket onto the visor making sure it is
relatively level and has a clear view of the road.
Power Connection
• Plug the small end of the power cord into the unit’s power
jack.
• Plug the large end into the vehicle’s cigarette lighter.
Fuse Replacement
The lighter socket plug is equipped with a replaceable 2 amp 3AG fuse located behind the silver tip. To replace the fuse, carefully unscrew the tip of the plug. (IMPORTANT: Unscrew slowly. The tip contains a spring which may fly out when disassembling.) Insert the new fuse with the spring and screw on the tip. With use, screw cap on plug may loosen.
Retighten occasionally.
Unscrew the tip of the lighter socket plug carefully when replacing the 2 amp fuse.
8
Insert into bracket mounting slot. Do not bend this section of bracket.
Slide on view
Compass Calibration Set-up
The unit will need to be calibrated in order for the com­pass to provide accurate readings. To calibrate the unit, perform the following procedure:
1. Mount the unit level in the center of the vehicle’s wind­shield in which it will be used. Make sure there are no other magnetic sources near the detector (i.e., speaker).
2. Select a large clear area (parking lot or field) without any power lines.
3. While parked, press both volume buttons simultaneously until unit displays:
4. Drive vehicle slowly in two complete circles. If calibration does not automatically finish press both volume buttons simultaneously to complete calibration. The unit will beep twice and display:
Note: If unit mounting is relocated in the vehicle, (i.e.,
visor to windshield mounting or dash mounting), or if the unit is moved to another vehicle, you must recalibrate the compass.
NE 45
°
Show Cardinal Points and Headings
CAL DONE
Loading...
+ 12 hidden pages