330-340-345 Series
SINS2101 /0415-V01
Hob
Installation Manual
for use in GB, FR, DE, ES,
IT, SI, SE, AT, CH, IE, LU
DECLARATION OF CONFORMITY
We: THETFORD Ltd
Address: Unit 6 Brookfields Way, Manvers, Rotherham, S63 5DL
Telephone: (+44) (0) 844 997 1960. Fax: (+44) (0) 844 997 1961
Declare that
Product Types; Domestic build-in gas hobs
Model Number/Description; SHB330XX Series, SHB340XX Series, SHB345XX Series
“Continental Range” LPG Hobs
Satisfies the essential requirements of the Gas Appliances Directive 2009/142/EC and is
manufactured in accordance with the harmonised European standards:
Satisfies the essential requirements of the Electro Magnetic Compatibility Directive
2014/30/EU and is manufactured in accordance with the harmonised European standards:
EN 30-1-1: 1998+A2:2010
EN 30-2-1: 1998+A1:2003+A2:2005
We also declare that the production of each specific model will be in conformity with the
type as described in the EC type-examination certificate:
EC 704 Rev.4 Issued by Intertek
We also declare that the production of each specific model will be in conformity with the
type as described in Test Report(s):
06022215, 07024132 & 08032970/B, Issued by Intertek
Name : S.P. Cordeille
Title/Position : Chief Executive Officer
Place & Date of Issue : Rotherham, 24 October 2014
Signature :
EN
Original Installation Manual
Contents
1 Introduction............................................................................................................................................................ 2
2 Symbols...................................................................................................................................................................2
3 Regulations and standards................................................................................................................................3
4 Position and placement......................................................................................................................................4
5 Connecting gas......................................................................................................................................................8
6 Connecting electricity..........................................................................................................................................8
7 After installation....................................................................................................................................................8
8 Technical specifications..................................................................................................................................... 9
9 Servicing.................................................................................................................................................................. 9
10 Questions / customer service........................................................................................................................ 10
1. Introduction
This is the installation manual for the Thetford 330, 340 and 345 series hob. The manual is meant
for qualified installers who will install the hob in a caravan, camper, boat or holiday home. Read the
information and instructions carefully and follow them strictly to install the unit safely and correctly.
Also read the warnings in the User Manual before testing the appliance after installation.
If the appliance is not installed in accordance with national and European Regulations,
Rules and Standards this will void the warranty and may lead to criminal prosecution.
2. Symbols
Key to symbols:
Warning. Risk of injury and/or damage.
Attention. Important information.
Note. Additional information.
2
3. Regulations and standards
Gas appliances should only be installed by qualified
and certified professionals;
Ensure that the type of gas and pressure match
the specification of the appliance. You can find the
specification on the data badge;
Pay close attention to current regulations on
ventilation of the country in use;
Do not modify this appliance, unless the
modification is authorised and carried out by the
manufacturer or their agent;
EN
Use only genuine and approved parts and materials.
Wear the correct Personal Protective Equipment
during the installation. Also follow the applicable
safety regulations.
For more information about ventilation regulations
and requirements, see chapter Position and
placement on page 4.
3