Power amp module PM40C
Technical specications
Output power:
40 W RMS / 55 W peak @ 8 Ω
50 W RMS / 86 W peak @ 4 Ω
Frequency response: 10 Hz - 20 kHz / - 1 dB
Voltage gain: 26 dB
Input impedance (active balanced): 20 kΩ
THD plus noise: 0.03%
Slew rate: 19 V/μs
Signal-to-noise ratio: 92 dB
Power consumption: 75 VA max.
Dimensions (W × H × D):
155 × 166 × 55.5 mm
Weight: 1.8 kg
PUS H
EN
This device amplies electric audio frequency signals to operate passive speakers. Any other use or use under other operating conditions
is considered to be improper and may result in personal injury or
property damage. No liability will be assumed for damages resulting from improper use.
Ensure that plastic bags, packaging, etc. are properly disposed of and
are not in the reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the
like) from the product. They could swallow the pieces and choke! Never let children use electrical devices unattended.
Thomann GmbH
Hans-Thomann-Str. 1 - 96138 Burgebrach - Germany
www.thomann.de
For the transport and protective packaging, environmentally friendly
materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of. Do
not just dispose of these materials with your normal household waste, but
make sure that they are collected for recycling. Please follow the notes and
markings on the packaging.
This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) in its currently valid version. Do not dis-
pose of your old device with your normal household waste. Dispose of
this product through an approved waste disposal rm or through your
local waste facility. Comply with the rules and regulations that apply in your
country. If in doubt, consult your local waste disposal facility.
Thomann GmbH
Hans-Thomann-Straße 1 • 96138 Burgebrach
Germany • www.thomann.de
DocID: 162094_14.12.15
Loading...